Simultaneous alternating current (AC) and direct current (DC) measurement is demonstrated with a new fiber sensor that combines fiber Bragg gratings (FBGs) with giant magnetostrictive materials (GMMs). Deformation of GMMs, proportional to the central wavelength shift of FBGs, is different when applying DC and AC to a solenoid where the whole sensing structure is located. DC introduces a constant deformation while AC causes a periodic variation. Therefore, the central wavelength of FBG has a periodic harmonic variation, which makes it possible to demodulate the values of DC and AC at the same time. In addition, the proposed method has potential significance for reducing temperature cross talk caused by the thermal sensitivity of FBGs. The experimental results show that the sensitivity of the AC current can reach up to 0.090576 nm/A in the range of 0 to 1 A, and in different AC environments, the sensitivity of the DC current can reach up to 0.2378 nm/A.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1364/AO.428667 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Fluorescent nanodiamond scintillators for beam diagnostics of EUV and soft X-ray in photolithographic applications.
RSC Adv
January 2025
Institute of Atomic and Molecular Sciences, Academia Sinica Taipei 106 Taiwan
Extreme ultraviolet (EUV) lithography is a cutting-edge technology in contemporary semiconductor chip manufacturing. Monitoring the EUV beam profiles is critical to ensuring consistent quality and precision in the manufacturing process. This study uncovers the practical use of fluorescent nanodiamonds (FNDs) coated on optical image sensors for profiling EUV and soft X-ray (SXR) radiation beams.
View Article and Find Full Text PDFA carbon fiber modified with tin oxide/graphitic carbon nitride as an electrochemical indirect competitive immuno-sensor for ultrasensitive aflatoxin M detection.
Bioelectrochemistry
January 2025
Department of Chemistry, Govt. College Women University, Arfa Kareem Road, Faisalabad 38000 Pakistan. Electronic address:
The importance of developing multifunctional nanomaterials for sensing technologies is increasing with the arrival of nanotechnology. In this study, we describe the introduction of novel nanoprobe electro-active material into the architecture of an electrochemical immuno-sensor. Based on the electrochemical immuno-sensor, functionalized tin oxide/graphitic carbon nitride nanocomposite (fSnO/g-CN) was synthesized and then analyte specific anti-aflatoxin M monoclonal antibody (AFM-ab) combined to form an electro-active nanoprobe (fSnO/g-CN/AFM-ab).
View Article and Find Full Text PDFBioinspired Tunable Helical Fiber-Shaped Strain Sensor with Sensing Controllability for the Rehabilitation of Hemiplegic Patients.
ACS Appl Mater Interfaces
January 2025
Textile and Clothing College, Qingdao University, Qingdao 266071, China.
Fiber-based strain sensors, as wearable integrated devices, have shown substantial promise in health monitoring. However, current sensors suffer from limited tunability in sensing performance, constraining their adaptability to diverse human motions. Drawing inspiration from the structure of the spiranthes sinensis, this study introduces a unique textile wrapping technique to coil flexible silver (Ag) yarn around the surface of multifilament elastic polyurethane (PU), thereby constructing a helical structure fiber-based strain sensor.
View Article and Find Full Text PDFAn Inverse FEM for Structural Health Monitoring of a Containership: Sensor Network Optimization for Accurate Displacement, Strain, and Internal Force Reconstruction.
Sensors (Basel)
January 2025
Department of Mechanical Engineering, Politecnico di Milano, Via G. La Masa 1, 20156 Milano, Italy.
In naval engineering, particular attention has been given to containerships, as these structures are constantly exposed to potential damage during service hours and since they are essential for large-scale transportation. To assess the structural integrity of these ships and to ensure the safety of the crew and the cargo being transported, it is essential to adopt structural health monitoring (SHM) strategies that enable real-time evaluations of a ship's status. To achieve this, this paper introduces an advancement in the field of smart sensing and SHM that improves ship monitoring and diagnostic capabilities.
View Article and Find Full Text PDFMonitoring Excavation-Induced Deformation of a Secant Pile Wall Using Distributed Fiber Optic Sensors.
Sensors (Basel)
January 2025
China Railway Seventh Group Co., Ltd., Zhengzhou 450016, China.
This paper investigates the use of the BOTDA (Brillouin Optical Time-Domain Analysis) technology to monitor a large-scale bored pile wall in the field. Distributed fiber optic sensors (DFOSs) were deployed to measure internal temperature and strain changes during cement grouting, hardening, and excavation-induced deformation of a secant pile wall. The study details the geological conditions and DFOS installation process.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!