Background: Trimethoprim (TMP) and sulfamethoxazole (SMX) are widely used, in combination, to treat or prevent various infections. Unfortunately, no liquid oral formulation is currently available in Canada for patients who are unable to swallow tablets.
Objective: To evaluate the stability of suspensions of TMP and SMX (8 and 40 mg/mL, respectively) prepared in Oral Mix or Oral Mix SF vehicle (Medisca Pharmaceutique Inc) and stored for up to 90 days in amber plastic bottles or amber plastic syringes at 5°C or 25°C.
Methods: Suspensions were prepared from bulk powder and from tablets in Oral Mix and Oral Mix SF vehicles, then transferred to amber plastic (polyethylene terephthalate glycol) bottles and plastic oral syringes and stored at 5°C and 25°C. Samples were collected on predetermined study days (0, 7, 14, 23, 45, 60, 75, and 90 days) and analyzed using a validated high-performance liquid chromatography - ultraviolet detection method. A suspension was considered stable if it maintained at least 90% of its initial concentration with 95% confidence. Observations of organoleptic characteristics such as colour and odour, as well as pH, were used to assess physical stability.
Results: Suspensions prepared from bulk powder maintained concentrations of TMP and SMX of at least 97% of the initial concentration over the 90-day study period. No obvious changes in colour, odour, or pH were observed. However, acceptable suspensions could not be prepared from the commercial tablets. A persistent foam that developed at the surface of all suspensions prepared from tablets could result in inconsistent dosing.
Conclusions: Extemporaneously compounded oral suspensions of TMP and SMX (8 and 40 mg/mL, respectively) prepared from bulk powder in Oral Mix and Oral Mix SF vehicles and stored in amber plastic bottles or syringes at 5°C or 25°C remained stable for at least 90 days. Suspensions made from tablets produced unacceptable formulations.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC8463027 | PMC |
http://dx.doi.org/10.4212/cjhp.v74i4.3194 | DOI Listing |
Mater Today Bio
February 2025
Discipline of Mechanical, Manufacturing and Biomedical Engineering, School of Engineering, Trinity College Dublin, Dublin 2, Ireland.
Peripheral nerve repair (PNR) is a major healthcare challenge due to the limited regenerative capacity of the nervous system, often leading to severe functional impairments. While nerve autografts are the gold standard, their implications are constrained by issues such as donor site morbidity and limited availability, necessitating innovative alternatives like nerve guidance conduits (NGCs). However, the inherently slow nerve growth rate (∼1 mm/day) and prolonged neuroinflammation, delay recovery even with the use of passive (no-conductive) NGCs, resulting in muscle atrophy and loss of locomotor function.
View Article and Find Full Text PDFOper Dent
January 2025
Nathaniel C Lawson, DDS, PhD, director of Master of Science in Dental Biomaterials program and associate professor, Department of Clinical and Community Sciences, University of Alabama at Birmingham School of Dentistry, Birmingham, AL, USA.
Objective: This study aimed to assess the fracture resistance of chairside computer assisted design and computer assisted manufacturing (CAD-CAM) lithium disilicate partial and full-coverage crowns and veneers for maxillary canines.
Methods And Materials: Forty-eight restorations for maxillary right canines (12 per group) were designed as follows: (1) partial crown with finish line in the upper middle third; (2) partial crown with finish line in the lower middle third; (3) traditional labial veneer; and (4) traditional full-coverage crown. Restorations were fabricated out of lithium disilicate (Amber Mill, Hassbio) using a chairside CAD-CAM system (Cerec Dentsply Sirona).
Phys Med Biol
December 2024
Trinity Centre for Biomedical Engineering, Trinity College Dublin, Dublin, Ireland.
The clinical decision to establish if a patient with carotid disease should undergo surgical intervention is primarily based on the percent stenosis. Whilst this applies for high-grade stenosed vessels (>70%), it falls short for other cases. Due to the heterogeneity of plaque tissue, probing the mechanics of the tissue would likely provide further insights into why some plaques are more prone to rupture.
View Article and Find Full Text PDFTransl Psychiatry
November 2024
Department of Neurosciences, University of New Mexico Health and Sciences Center, Albuquerque, NM, USA.
CircHomer1 is an activity-dependent circular RNA (circRNA) isoform produced from back-splicing of the Homer1 transcript. Homer1 isoforms are well-known regulators of homeostatic synaptic plasticity through post-synaptic density scaffold regulation. Homer1 polymorphisms have been associated with psychiatric diseases including schizophrenia (SCZ) and bipolar disorder (BD).
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!