Large volumes of waste petroleum coke stockpiled in open yard not only represent a huge loss of valuable material but also pose a significant risk to the environment. This work proposed an innovative strategy for waste petroleum coke valorization by exploring its catalytic performance of biomass gasification tar destruction. Waste petroleum coke was firstly activated by potassium hydroxide (KOH) to obtain high specific surface area as well as low sulfur and ash contents. Petroleum coke derived catalyst showed superior performance than a commercial activated carbon derived catalyst for destruction of naphthalene as the tar model compound. The petroleum coke derived catalyst exhibited 99.1% naphthalene destruction efficiency at 800 °C but deactivated quickly under N atmosphere. Under H and steam atmospheres, the catalytic activities were 98.6% and 96.5% for 8 h, respectively. To study the correlation between catalytic performance and the structure of carbon catalyst, elemental analysis, scanning electron microscope (SEM) analysis, transmission electron microscope (TEM) analysis, X-ray powder diffraction (XRD) analysis, Brunauer-Emmett-Teller method (BET) analysis, Fourier transform infrared (FTIR) spectroscopy, temperature programmed oxidation (TPO) analysis and Raman spectroscopy were performed on both fresh and spent catalysts. Results demonstrated that the hydrogen-rich groups (small rings and amorphous carbon) and oxygen-containing groups may account for the good resistance to coke deposition under H and steam atmospheres.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1016/j.jhazmat.2021.127297 | DOI Listing |
Molecules
January 2025
Key Laboratory of the Ministry of Education for Advanced Catalysis Materials, Zhejiang Normal University, Jinhua 321004, China.
CO capture from the flue gas is a promising approach to mitigate global warming. However, regulating the carbon-based adsorbent in terms of textural and surface modification is still a challenge. To overcome this issue, the present study depicts the development of cost-effective and high-performance CO adsorbents derived from petroleum coke, an industrial by-product, using a two-step process involving thiourea modification and KOH activation.
View Article and Find Full Text PDFACS Omega
January 2025
Shandong Lianhua New Materials Co., Ltd, No. 1 Gongye Seventh Road, Yangxin County Economic Development Zone, Binzhou, Shandong 251802, China.
This study introduces a novel method for rapid characterization of the mesophase optical textures based on in situ coking of heavy oil. The conventional methods of mesophase characterization often compromise the structural integrity of coke's texture and exhibit constraints in image processing, which may lead to misrepresentation of coke properties. In this research, a rapid characterization method for the mesophase was developed, in which the digital image processing technique and statistical methods were combined together.
View Article and Find Full Text PDFWaste Manag
January 2025
Department of Mechanical Engineering, University of Alberta, 10-203 Donadeo Innovation Centre for Engineering, Edmonton, Alberta T6G 1H9, Canada. Electronic address:
Bitumen-derived petcoke contains significant quantities of vanadium, recoverable from the fly ash formed during combustion. Despite efforts to process vanadium recovery from petcoke, detailed cost information, critical for stakeholders and decision-makers, remains absent in the public domain. To address this gap, we developed data-intensive techno-economic models specifically for vanadium recovery from petcoke fly ash.
View Article and Find Full Text PDFChemSusChem
January 2025
Key Laboratory of Luminescence and Optical Information Technology, School of Physical Science and Engineering, Beijing Jiaotong University, Beijing, 100044, P. R. China.
The eco-friendly features and desirable catalytic activities of Fe-based catalysts make them highly promising for propane dehydrogenation (PDH). However, simultaneously improving their stability and activity remains a challenge. Here, we present a strategy to address these issues synergistically by anchoring single-atom Fe-Cl sites in Al vacancies of AlO.
View Article and Find Full Text PDFEnviron Pollut
January 2025
School of Environment and Energy, South China University of Technology, 510006, Guangzhou, China; National Engineering Laboratory for VOCs Pollution Control Technology and Equipment, 510006, Guangzhou, China; Guangdong Provincial Key Laboratory of Atmospheric Environment and Pollution Control (SCUT), 510006, Guangzhou, China; Guangdong Provincial Engineering and Technology Research Centre for Environmental Risk Prevention and Emergency Disposal, South China University of Technology, 510006, Guangzhou, China.
To overcome the worldwide environmental crisis related to the continuous emission of CO, the use of porous organic polymers, which are excellent absorbents and conversion materials, to reduce CO emission is of great significance. Among them, hyper-crosslinked polymers (HCPs) are porous materials with a high pore density that are synthesized using a simple one-pot method that is economical and can realized at a low temperature, hence they have good application prospects as adsorbents for CO. In this study, a batch of petroleum coke-based HCPs with different sulfur contents was prepared via the one-pot Friedel-Crafts alkylation reaction using inexpensive and abundant petroleum coke as raw material.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!