Existing experimental research on bond properties of the interface between Carbon Fiber Reinforced Polymer (CFRP) and damaged concrete is limited, although CFRP strengthening technology has been widely used for corroded reinforced concrete structures. This work investigated the bond behavior of CFRP to the corrosion-cracked concrete interface, in which three factors were considered for experimentation, including corrosion degree, concrete strength and concrete cover thickness. The tests were conducted by developing a self-balancing double shear lap test device. In addition, a corrosion scene was provided simultaneously to simulate the external corrosion environment. The results showed that three peeling modes of CFRP sheets were observed with respect to corrosion degrees of the steel bars. The effects of the three factors on the stripping bearing capacity and effective bond length of CFRP sheets were discussed by systematic parametric analysis. Finally, a nonlinear degenerate law of CFRP-to-concrete interface considering the corrosion degree was improved and verified in this study.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC8470516 | PMC |
| http://dx.doi.org/10.3390/ma14185333 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Diversity-oriented synthesis of stereodefined tetrasubstituted alkenes via a modular alkyne gem-addition strategy.
Nat Commun
January 2025
School of Pharmacy, Nanjing University of Chinese Medicine, Nanjing, China.
Stereocontrolled construction of tetrasubstituted olefins has been an attractive issue yet remains challenging for synthetic chemists. In this manuscript, alkynyl selenides, when treated with ArBCl, are subject to an exclusive 1,1-carboboration, affording tetrasubstituted alkenes with excellent levels of E-selectivity. Detailed mechanistic studies, supported by DFT calculations, elucidates the role of selenium in this 1,1-addition process.
View Article and Find Full Text PDFSuper-strong hydrogel reinforced by an interconnected hollow microfiber network via regulating the water-cellulose-copolymer interplay.
Sci Bull (Beijing)
January 2025
Hubei Biomass-Resource Chemistry and Environmental Biotechnology Key Laboratory, Hubei Provincial Engineering Research Center of Emerging Functional Coating Materials, School of Resource and Environmental Sciences, Wuhan University, Wuhan 430079, China. Electronic address:
The discontinuous fiber reinforced hydrogels are easy to fail due to the fracture of the fiber matrix during load-bearing. Here, we propose a novel strategy based on the synergistic reinforcement of interconnected natural fiber networks at multiple scales to fabricate hydrogels with extraordinary mechanical properties. Specifically, the P(AA-AM)/Cel (P(AA-AM), poly(acrylic acid-acrylamide); Cel, cellulose) hydrogel is synthesized by copolymerizing AA and AM on a substrate of paper with an interconnected hollow cellulose microfiber network.
View Article and Find Full Text PDFAn unconventional separation method of α-Terpineol from its isomer 1,8-Cineole via in situ-association formation of deep eutectic solvent and machine learning.
J Chromatogr A
January 2025
College of Pharmaceutical Sciences, Zhejiang University, Hangzhou 310058, PR China. Electronic address:
α-Terpineol and 1,8-cineole are two important compounds in essential oils. This study developed an efficient method to recover α-terpineol from model oil (MO) based on association extraction by in situ formations of deep eutectic solvent (DES) between α-terpineol and some quaternary ammonium salts (QASs) by hydrogen-bond (HB) interaction. Such interaction could be broken almost completely by the introduction of water, due to the stronger HB interaction between water and QASs, which could release α-terpineol by liquid-liquid separation and save the organic solvents consumption.
View Article and Find Full Text PDFFlexural Response Comparison of Nylon-Based 3D-Printed Glass Fiber Composites and Epoxy-Based Conventional Glass Fiber Composites in Cementitious and Polymer Concretes.
Polymers (Basel)
January 2025
School of Civil Engineering and Environmental Science, University of Oklahoma, 202 W Boyd St., Norman, OK 73019, USA.
With 3D printing technology, fiber-reinforced polymer composites can be printed with radical shapes and properties, resulting in varied mechanical performances. Their high strength, light weight, and corrosion resistance are already advantages that make them viable for physical civil infrastructure. It is important to understand these composites' behavior when used in concrete, as their association can impact debonding failures and overall structural performance.
View Article and Find Full Text PDFA Systematic Study of the Structural Properties of Technical Lignins.
Polymers (Basel)
January 2025
Postgraduate Program in Engineering of Processes and Technologies (PGEPROTEC), University of Caxias do Sul (UCS), Caxias do Sul 95070-560, Brazil.
Technical lignins are globally available and a sustainable feedstock. The unique properties of technical lignins suggest that these materials should have several industrial applications. The main proposal of this study is to evaluate the relationship between the structure and properties of two technical lignins.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!