The aim of this study was to promote bioactivity of the PEEK surface using sulfuric acid and piranha solution. PEEK was functionalized by a sulfuric acid treatment for 90 s and by piranha solution for 60 and 90 s. Chemical modification of the PEEK surface was evaluated by infrared spectroscopy, contact angle analysis, cytotoxicity, cell adhesion and proliferation. The spectroscopy characteristic band associated with sulfonation was observed in all treated samples. PEEK with piranha solution 60 s showed an increase in the intensity of the bands, which was even more significant for the longer treatment (90 s). The introduction of the sulfonic acid functional group reduced the contact angle. In cytotoxicity assays, for all treatments, the number of viable cells was higher when compared to those of untreated PEEK. PEEK treated with sulfuric acid and piranha solution for 60 s were the treatments that showed the highest percentage of cell viability with no statistically significant differences between them. The modified surfaces had a greater capacity for inducing cell growth, indicative of effective cell adhesion and proliferation. The proposed chemical modifications are promising for the functionalization of PEEK-based implants, as they were effective in promoting bioactivation of the PEEK surface and in stimulating cell growth and proliferation.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC8465912PMC
http://dx.doi.org/10.3390/biom11091260DOI Listing

Publication Analysis

Top Keywords

piranha solution
20
sulfuric acid
16
acid piranha
12
cell growth
12
peek surface
12
peek
8
capacity inducing
8
inducing cell
8
contact angle
8
cell adhesion
8

Similar Publications

The best layout design related to the sensor node distribution represents one among the major research questions in Wireless Sensor Networks (WSNs). It has a direct impact on WSNs' cost, detection capabilities, and monitoring quality. The optimization of several conflicting objectives, including as load balancing, coverage, cost, lifetime, connection, and energy consumption of sensor nodes, is necessary for layout optimization.

View Article and Find Full Text PDF

Osseointegration of Implants Through Ti Biofunctionalization with Biomass from UTEX 1230 and sp. PCC 7002.

Int J Mol Sci

December 2024

Biomedical Engineering Department, Universidad Simón Bolívar, Barranquilla 080002, Colombia.

The inadequate osseointegration of titanium implants remains a significant challenge in orthopedics, limiting the long-term efficacy of prostheses and medical devices. It has been determined that biological aging of the titanium surface compromises the implant-bone tissue interaction due to increased hydrophobicity and accumulation of organic molecules. To address this issue, an innovative strategy has been proposed: the biofunctionalization of Ti6Al4V surfaces utilizing biomass derived from UTEX 1230 and sp.

View Article and Find Full Text PDF

Myxozoa is a class of the Phylum Cnidaria made up of endoparasites from aquatic habitats. The genus Ceratomyxa preferentially infects marine fish, with the gallbladder being the main site parasitized. This study aimed to describe a new species of Ceratomyxa found in this organ in Boulengerella cuvieri using morphological, morphometric characterization and phylogenetic analysis of 18S rDNA gene sequences.

View Article and Find Full Text PDF

Laminin 332 functionalized surface improve implant roughness and oral keratinocyte bioactivity.

Heliyon

August 2024

Grupo de Inmunología Cellular y Molecular de la Universidad El Bosque-INMUBO, Colombia.

Article Synopsis
  • The study examines the importance of the biological seal at the dental implant-tissue interface, particularly focusing on laminin 332 as a protein that enhances this seal.
  • A special treatment was applied to titanium implant surfaces to facilitate the attachment of laminin 332, followed by experimentation with human keratinocyte cells to evaluate their response.
  • Results indicated that laminin 332 improved the implant's surface properties and promoted cell viability and growth factor expression, suggesting it could enhance the biocompatibility of dental implants.
View Article and Find Full Text PDF

In this work kaolinite nanotubes (KNT) were obtained from commercial kaolin AKF-78 (Uzbekistan) by starting material sequential intercalation by DMSO and methanol, followed by treatment with a cetyltrimethylammonium chloride solution. Acid functionalization of KNT for catalytic applications was successfully performed for the first time using a two-step treatment with piranha solution (HSO-HO), which resulted in the removal of organic impurities as synthetic artifacts and an increase in specific surface area by 3.9 times (up to 159 m g), pore volume by 1.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!