Enhancing the dispersibility of multiwalled carbon nanotubes within starch-based films by the use of ionic surfactants.

Carbohydr Polym

Department of Materials and Ceramic Engineering, CICECO - Aveiro Institute of Materials, University of Aveiro, 3810-193 Aveiro, Portugal. Electronic address:

Published: December 2021

The incorporation of carbon-based nanomaterials into biopolymer matrix, to provide mechanical reinforcement and to obtain electrically conductive bionanocomposites, requires the homogeneous dispersion of the fillers. Herein, it is investigated the influence of surfactant structures on the dispersibility of multiwalled carbon nanotubes (MWNT) within starch matrix. Three different ionic surfactants, sodium dodecyl sulphate (SDS), cetyltrimethylammonium bromide (CTAB) and sodium cholate (SC), are employed to disperse the MWNT. Films with MWNT-SC show better dispersibility and an increase of about 75% of tensile strength and 60% of Young's modulus compared with films using MWNT-SDS and MWNT-CTAB. Nevertheless, MWNT functionalized with CTAB impart the highest values of antioxidant activity (scavenging activity around 30% in 1.5 h) and electrical conductivity (σ =14.75 S/m) to starch matrix. The properties of starch-based films can be tailored according to the physical adsorption of each surfactant on MWNT surface and/or the interfacial interaction of the surfactant with starch chains.

Download full-text PDF

Source
http://dx.doi.org/10.1016/j.carbpol.2021.118531DOI Listing

Publication Analysis

Top Keywords

dispersibility multiwalled
8
multiwalled carbon
8
carbon nanotubes
8
starch-based films
8
ionic surfactants
8
starch matrix
8
enhancing dispersibility
4
nanotubes starch-based
4
films
4
films ionic
4

Similar Publications

Development of Single-Walled Carbon Nanotube-Based Electrodes with Enhanced Dispersion and Electrochemical Properties for Blood Glucose Monitoring.

Biosensors (Basel)

December 2024

Department of Gyedang College of General Education, Sangmyung University, 31 Sangmyungdae-Gil, Dongnam-Gu, Cheonan 31066, Republic of Korea.

The evolution of high-performance electrode materials has significantly impacted the development of real-time monitoring biosensors, emphasizing the need for compatibility with biomaterials and robust electrochemical properties. This work focuses on creating electrode materials utilizing single-walled carbon nanotubes (SWCNTs) and multi-walled carbon nanotubes (MWCNTs), specifically examining their dispersion behavior and electrochemical characteristics. By using ultrasonic waves, we analyzed the dispersion of CNTs in various solvents, including N, N-dimethylformamide (DMF), deionized water (DW), ethanol, and acetone.

View Article and Find Full Text PDF

Introduction: The rapid growth of flexible and wearable electronics has created a need for materials that offer both mechanical durability and high conductivity. Textile electronics, which integrate electronic pathways into fabrics, are pivotal in this field but face challenges in maintaining stable electrical performance under mechanical strain. This study develops highly stretchable silver multi-walled carbon nanotube (Ag-MWCNT) composites, tailored for screen printing and heat-transfer methods, to address these challenges.

View Article and Find Full Text PDF

The dispersion method does not affect the in vitro genotoxicity of multi-walled carbon nanotubes despite inducing surface alterations.

NanoImpact

December 2024

In Vitro Toxicology Group, Faculty of Medicine, Health and Life Sciences, Institute of Life Sciences, Swansea University Medical School, Singleton Park, Swansea SA2 8PP, UK. Electronic address:

Multi-walled carbon nanotubes (MWCNTs) are a desirable class of high aspect ratio nanomaterials (HARNs) owing to their extensive applications. Given their demand, the growing occupational and consumer exposure to these materials has warranted an extensive investigation into potential hazards they may pose towards human health. This study utilised both the in vitro mammalian cell gene mutation and the cytokinesis-blocked micronucleus (CBMN) assays to investigate genotoxicity in human lymphoblastoid (TK6) and 16HBE14o human lung epithelial cells, following exposure to NM-400 and NM-401 MWCNTs for 24 h.

View Article and Find Full Text PDF

A strategically designed ternary nanohybrid (TNS-PDA/CNT), consisting of titanate nanosheet (TNS) and polydopamine-modified multiwalled carbon nanotube (PDA/CNT composite), was synthesized by the facile hydrothermal method and wet impregnation method for removal of U(VI) from aqueous solution and were characterized by transmission electron microscopy (TEM), scanning electron microscopy-energy-dispersive X-ray spectroscopy (SEM-EDS), X-ray diffraction (XRD), Fourier transform infrared (FT-IR), thermogravimetric analysis (TGA), Raman spectroscopy, Brunauer-Emmett-Teller (BET), and X-ray photoelectron spectroscopy (XPS). TNSs were introduced into the PDA/CNT composite, which effectively averted the agglomeration of the CNT and further exposed more adsorption sites. PDA thin layer exposing more active sites was conducive to enhance adsorption capacity and kinetic.

View Article and Find Full Text PDF

This work presents a new and facile synthesis approach for multiwalled carbon nanotubes (MWCNTs) decorated with ruthenium oxide (RuO) nanoparticles using a simple and efficient sonochemical method. The strong interaction and homogenous distribution of RuO nanoparticles on the surface of MWCNTs were revealed by Raman spectroscopy and transmission electron microscopy. The presence of metal oxide nanoparticles anchored onto the surface of MWCNTs was further confirmed by X-ray diffraction and energy-dispersive X-ray analysis.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!