AI Article Synopsis
Article Abstract
Purpose: This study evaluated dentin bond strength, failure mode, interface morphology, adhesive infiltration into dentin, and marginal adaptation of bulk-fill composites used with different adhesives.
Materials And Methods: Third molars received occlusal class I cavities (4 mm x 4 mm x 4 mm) that were bulk-filled with Admira Fusion x-tra (Voco) or SonicFill 2 (Kerr) using four adhesives (Scotchbond Multipurpose, 3M Oral Care; Clearfil SE Bond, Kuraray Noritake; OptiBond All-In-One, Kerr; Futurabond U, Voco). Scotchbond was used with acid-etching, while the remaining adhesives were applied in self-etch mode. Sixty-four teeth were selected for the microtensile bond strength test (n = 8). Failure modes were analyzed with scanning electron microscopy (SEM). Interface morphology and adhesive infiltration (n = 3) were investigated using confocal laser scanning microscopy (CLSM). Marginal adaptation (n = 3) was also evaluated using SEM. Bond strength, failure mode, and adhesive infiltration data were analyzed for distribution and homocedasticity, followed by appropriate statistical analyses (α = 0.05).
Results: Regarding bond strength, no differences were found among adhesives for SonicFill; Clearfil showed a significantly lower mean value than did Scotchbond (p ≤ 0.05) for Admira; the two composites did not differ. Adhesive and mixed failures were observed for all groups. Scotchbond led to thicker hybrid layers with deeper adhesive infiltration as opposed to Futurabond. The groups Admira+Futurabond, SonicFill+Clearfil, and SonicFill+Futurabond presented the highest marginal discontinuity.
Conclusion: The tested bulk-fill composites did not affect dentin bonding. Scotchbond and Clearfil seem to be reliable for bonding SonicFill 2 to dentin. The performance of Futurabond was questionable, given its poor-quality interface and higher percentages of marginal gaps.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.3290/j.jad.b2000221 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Influence of three antiseptic mouthwashes on microtensile bond strength of self-etch adhesive to dentin: Rinsing versus non-rinsing with water.
Heliyon
December 2024
Department of Advanced General Dentistry, Faculty of Dentistry, Mahidol University, Bangkok, 10400, Thailand.
Objective: The purpose of this study was to examine the effect of several antiseptic mouthwashes on the dentin microtensile bond strength of self-etch adhesive, considering the influence of rinsing with water.
Methods: Forty flat dentin surfaces were produced by sectioning sound extracted third molars. They were randomly divided into four main groups: (1) artificial saliva (control); (2) 1 % hydrogen peroxide; (3) 0.
Fabrication of strain-sensing fibers with silver nanoparticles and reduced graphene oxide via wet spinning.
Nanotechnology
December 2024
Donghua University, 1882 West Yan'an Road, Shanghai, 200051 , CHINA.
To advance the industrialization of flexible strain sensors, an innovative flexible sensing fiber was developed through a sophisticated wet spinning process. Silver trifluoroacetate (C2AgF3O2) and graphene oxide (GO) were combined with thermoplastic polyurethane (TPU) to prepare the fibers via wet spinning. Ascorbic acid (L-AA) was used to in situ reduce the silver trifluoroacetate and graphene oxide within the polyurethane, causing the growth of silver nanoparticles to bond with reduced graphene oxide, forming a dual conductive pathway.
View Article and Find Full Text PDFIn Situ Column Modification of Silica Monoliths With Pentafluorophenyl Ligands for the HPLC Separation of Eight Tocochromanols.
J Sep Sci
December 2024
Department of Chromatography and Mass Spectrometry, Institute of Horticulture, Dobele, Latvia.
Silica-based monoliths offer higher separation efficiency per unit pressure drop compared to particle-packed columns. Their application is limited by the commercial availability of different column chemistries. Pentafluorophenyl ligands enable hydrogen bonding, dipole-dipole, π-π, and hydrophobic interactions, facilitating the separation of various compounds.
View Article and Find Full Text PDFInfluence of surface pretreatment using cold-active atmospheric pressure plasma on bond strength of CAD-CAM-fabricated hybrid ceramic crowns: an in-vitro study.
Int J Implant Dent
December 2024
Department for Prosthetic Dentistry and Materials, University Medical Centre, Augustusplatz 2, 55131, Mainz, Germany.
Purpose: This study assesses the impact of Cold Atmospheric Pressure Plasma (CAP) pretreatment on the bond strength of two-piece hybrid ceramic abutment crowns in implant dentistry. The objective is to ascertain whether CAP can be employed as an alternative or complementary technique to conventional methods.
Methods: 80 titanium bases and 80 VITA ENAMIC polymer-infiltrated ceramic network (PICN) crowns were divided into 8 groups (n = 10) based on different surface pretreatments of the crowns before cementation: no treatment (A), hydrofluoric acid (HF) (B), HF and silane (C), silane (D), CAP (AP), HF and CAP (BP), HF, CAP, and silane (CP), and CAP and silane (DP).
Functional Group Effects on the Interfacial Adsorption of Arylquinoline-3-Carbonitriles on Iron: A DFT-D3 Investigation of Surface Interaction Mechanisms.
Langmuir
December 2024
Department of Architectural Engineering, Hanyang University ERICA, 55 Hanyangdaehak-ro, Sangrok-gu, Ansan-si 15588, Gyeonggi-do, Republic of Korea.
Reliable corrosion inhibition systems are crucial for extending the lifespan of industrial metal structures. Quinolines, with their high adsorption capacity and protective efficiency, are promising next-generation inhibitors. However, the impact of substitutions on their coordination with iron surfaces requires deeper understanding.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!