The properties of edible films derived from corn starch (CS) and methylcellulose (MC) supplemented with fireweed extract (FE; 0.0125-0.05% w/w) were analyzed. Due to their more crystalline structure, the MC films were significantly stronger (~26 MPa) than the CS films (~4 MPa). In turn, CS produced films with lower water vapor permeability (WVP, 50.12-51.74 vs. 56.52-59.10 g mm m d kPa). The hydrothermally-disrupted starch granules contributed to high roughness and opacity of the CS films. The FE-supplemented films exhibited an intensive yellow color and improved the UV-absorbing effect. FE delayed starch retrogradation, as indicated by the reduced crystallinity and slightly improved transparency of the CS films. Incorporation of FE significantly enhanced the released radical scavenging activity (RSA) of the films, while did not affect the WVP and mechanical properties. Due to better FE-trapping capacity, the CS-based films exhibited lower antioxidant activity (RSA = 2.21-19.75%) as compared to the MC counterparts (RSA = 4.87-38.31%).
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/j.ijbiomac.2021.09.079 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
A Wenzel Interfaces Design for Homogeneous Solute Distribution Obtains Efficient and Stable Perovskite Solar Cells.
Adv Mater
January 2025
College of Chemistry and Chemical Engineering/Film Energy Chemistry for Jiangxi Provincial Key Laboratory (FEC), Nanchang University, 999 Xuefu Avenue, Nanchang, 330031, China.
The coffee-ring effect, caused by uneven deposition of colloidal particles in perovskite precursor solutions, leads to poor uniformity in perovskite films prepared through large-area printing. In this work, the surface of SnO is roughened to construct a Wenzel model, successfully achieving a super-hydrophilic interface. This modification significantly accelerates the spreading of the perovskite precursor solution, reducing the response delay time of perovskite colloidal particles during the printing process.
View Article and Find Full Text PDFTemperature Dependence on Microstructure, Crystallization Orientation, and Piezoelectric Properties of ZnO Films.
Sensors (Basel)
January 2025
State Key Laboratory of Materials Processing and Die & Mould Technology, School of Materials Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074, China.
This study has investigated the effects of different annealing temperatures on the microstructure, chemical composition, phase structure, and piezoelectric properties of ZnO films. The analysis focuses on how annealing temperature influences the oxygen content and the preferred c-axis (002) orientation of the films. It was found that annealing significantly increases the grain size and optimizes the columnar crystal structure, though excessive high-temperature annealing leads to structural degradation.
View Article and Find Full Text PDFResearch on the Application of Silver Nanowire-Based Non-Magnetic Transparent Heating Films in SERF Magnetometers.
Sensors (Basel)
January 2025
School of Optical-Electrical and Computer Engineering, University of Shanghai for Science and Technology, Shanghai 200093, China.
We propose a non-magnetic transparent heating film based on silver nanowires (Ag-NWs) for application in spin-exchange relaxation-free (SERF) magnetic field measurement devices. To achieve ultra-high sensitivity in atomic magnetometers, the atoms within the alkali metal vapor cell must be maintained in a stable and uniform high-temperature environment. Ag-NWs, as a transparent conductive material with exceptional electrical conductivity, are well suited for this application.
View Article and Find Full Text PDFBiocomposite Active Whey Protein Films with Thyme Reinforced by Electrospun Polylactic Acid Fiber Mat.
Foods
January 2025
Center of Excellence Polymer Processing, Faculty of Engineering, Dunarea de Jos University of Galați, Domnească Street, No. 111, 800201 Galați, Romania.
Electrospinning is a versatile technique for obtaining nano/micro fibers which are able to significantly change the active properties of composite materials and bring in new dimensions to agri-food applications. Composite bio-based packaging materials obtained from whey proteins, functionalized with thyme essential oil (TEO) and reinforced by electrospun polylactic acid (PLA) fibers, represent a promising solution for developing new active food packaging using environmentally friendly materials. The aim of this study is to obtain and characterize one-side-active composite films covered with a PLA fiber mat: (i) WF/G1, WF/G2, and WF/G3 resulting from electrospinning with one needle at different electrospinning times of 90, 150, and 210 min, respectively, and (ii) WF/G4 obtained with two face-to-face needles after 210 min of electrospinning.
View Article and Find Full Text PDFCassava Waste Starch as a Source of Bioplastics: Development of a Polymeric Film with Antimicrobial Properties.
Foods
January 2025
Programa de Pós-Graduação em Ciência de Alimentos (PPGCA), Universidade Federal de Minas Gerais, Av. Antônio Carlos, 6627, Belo Horizonte 31270-901, MG, Brazil.
Polysaccharides represent the most abundant biopolymers in agri-food wastes and thus are the most studied polymers to produce biodegradable films for use in packaging. Starch is among the major polysaccharides extracted from food and agricultural waste that have been used as precursor material for film production. Therefore, the present study aimed at producing an active film with antimicrobial properties using starch extracted from cassava waste and oil extracted from cloves.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!