The microbial induced mineral precipitation can be used to modify and improve the performance of construction materials and can partially replace ordinary Portland cement. Microbially induced carbonate precipitation (MICP) mainly uses the urease secreted during the growth of urease-producing bacteria (UPB) to hydrolyze urea produce CO and reacts with Ca to form CaCO. Microbially induced struvite precipitation (MISP) mainly uses the urease to decompose urea to produce NH. In the presence of hydrogen phosphate and magnesium ions, the struvite can be precipitated. The elemental composition and chemical composition of the precipitates produced by the MICP and MISP processes are analyzed by energy dispersive X-ray spectroscopy (EDS) and powder X-ray diffraction analysis (XRD). The morphology of the precipitates can be observed by scanning electron microscope (SEM). Compared with the initial porosity, the MICP method can reduce the initial porosity of the sand column by 2.98% within 90 min. However, the MISP is only 1.45%. The permeability coefficient of the sand column can be effectively reduced in the MICP process. The total content of cementitious materials is 27.71g and 13.16g in MICP- and MISP-cemented sand columns, respectively. The MICP technology can improve the strength of alkali-activated mortars under different pH values of the UPB solution.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1007/s11356-021-16401-0 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Construction of Supramolecular Polymer Network Elastomers Based on Pillar[5]arene/Alkyl Chain Host-Guest Interactions.
ACS Macro Lett
January 2025
Key Laboratory of Materials Chemistry for Energy Conversion and Storage, Ministry of Education, Hubei Key Laboratory of Materials Chemistry and Service Failure, Hubei Engineering Research Center for Biomaterials and Medical Protective Materials, State Key Laboratory of Materials Processing and Die & Mould Technology, School of Chemistry and Chemical Engineering, Huazhong University of Science and Technology, Wuhan 430074, China.
As a special kind of supramolecular compound with many favorable properties, pillar[]arene-based supramolecular polymer networks (SPNs) show potential application in many fields. Although we have come a long way using pillar[]arene to prepare SPNs and construct a series of smart materials, it remains a challenge to enhance the mechanical strength of pillar[]arene-based SPNs. To address this issue, a new supramolecular regulation strategy was developed, which could precisely control the preparation of pillar[]arene-based SPN materials with excellent mechanical properties by adjusting the polymer network structures.
View Article and Find Full Text PDFPhotocatalytic Direct Borylation of Benzothiazole Heterocycles via a Triplet Activation Strategy.
Org Lett
January 2025
Anhui Province Key Laboratory of Chemistry for Inorganic/Organic Hybrid Functionalized Materials, College of Chemistry & Chemical Engineering, Anhui University, Hefei, Anhui 230601, China.
Boron compounds are widely employed in organic chemistry, pharmaceuticals, and materials science. Among them, borylated heterocycles serve as versatile synthons for the construction of new C-C or C-heteroatom bonds via coupling or radical processes. Such methods for direct C-H borylation reactions are of high synthetic value to reduce the number of synthetic steps and the amount of waste and to improve efficiency.
View Article and Find Full Text PDFConstruction of Mn-Defective S/MnCdS for Promoting Photocatalytic N Reduction.
Inorg Chem
January 2025
Key Laboratory of Green and Precise Synthetic Chemistry and Applications, Ministry of Education, Huaibei Normal University, Huaibei, Anhui 235000, P. R. China.
Improving catalytic performance by controlling the microstructure of materials has become a hot topic in the field of photocatalysis, such as the surface defect site, multistage layered morphology, and exposed crystal surface. Due to the differences in the metal atomic radius (Mn and Cd) and solubility product constant (MnS and CdS), Mn defect easily occurred in the S/MnCdS (S/0.4MCS) composite.
View Article and Find Full Text PDFDebus-Radziszewski Reaction Inspired In Situ "One-Pot" Approach to Construct Luminescent Zirconium-Organic Frameworks.
Inorg Chem
January 2025
Hoffmann Institute of Advanced Materials, Shenzhen Polytechnic University, 7098 Liuxian Blvd, Nanshan District, Shenzhen 518055, P. R. China.
Metal-organic frameworks have received extensive development in the past three decades, which are generally constructed via the reaction between inorganic building units and commercially available or presynthesized organic linkers. However, the presynthesis of organic linkers is usually time-consuming and unsustainable due to multiple-step separation and purification. Therefore, methodology development of a new strategy is fundamentally important for the construction and further exploration of the applications of MOFs.
View Article and Find Full Text PDFMultifunctional electrospinning periosteum: Development status and prospect.
J Biomater Appl
January 2025
State Key Laboratory of New Textile Materials and Advanced Processing Technologies, Wuhan Textile University, Wuhan, China.
In the repair of large bone defects, loss of the periosteum can result in diminished osteoinductive activity, nonunion, and incomplete regeneration of the bone structure, ultimately compromising the efficiency of bone regeneration. Therefore, the research and development of tissue-engineered periosteum which can replace the periosteum function has become the focus of current research. The functionalized electrospinning periosteum is expected to mimic the natural periosteum and enhance bone repair processes more effectively.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!