We present a simple approach to high-accuracy calculations of critical properties for the three-dimensional Ising model, without prior knowledge of the critical temperature. The iterative method uses a modified block-spin transformation with a tunable parameter to improve convergence in the Monte Carlo renormalization group trajectory. We found experimentally that the iterative method enables the calculation of the critical temperature simultaneously with a critical exponent.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1103/PhysRevE.104.025311 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
On Security Performance of SWIPT Multi-User Jamming Based on Mixed RF/FSO Systems with Untrusted Relay.
Sensors (Basel)
December 2024
Key Laboratory of Electromagnetic Wave Information Technology and Metrology of Zhejiang Province, College of Information Engineering, China Jiliang University, Hangzhou 310018, China.
This paper presents research on the security performance of a multi-user interference-based mixed RF/FSO system based on SWIPT untrusted relay. In this work, the RF and FSO channels experience Nakagami-m fading distribution and Málaga (M) turbulence, respectively. Multiple users transmit messages to the destination with the help of multiple cooperating relays, one of which may become an untrusted relay as an insider attacker.
View Article and Find Full Text PDFBayesian Architecture for Predictive Monitoring of Unbalance Faults in a Turbine Rotor-Bearing System.
Sensors (Basel)
December 2024
Department of Mechanical Engineering, Ming Chi University of Technology, New Taipei City 24301, Taiwan.
Unbalance faults are among the common causes of interruptions and unexpected failures in rotary systems. Therefore, monitoring unbalance faults is essential for predictive maintenance. While conventional time-invariant mathematical models can assess the impact of these faults, they often rely on proper assumptions of system factors like bearing stiffness and damping characteristics.
View Article and Find Full Text PDFDesign and Test of a Calibration System for Avalanche Photodiodes Used in X-Ray Compton Polarimeters for Space.
Sensors (Basel)
December 2024
SCAI Connect s.r.l., Via Vincenzo Lamaro 51, 00173 Rome, Italy.
The development and calibration of a measurement system designed for assessing the performance of the avalanche photodiodes (APDs) used in the Compton scattering polarimeter of the CUSP project is discussed in this work. The designed system is able to characterize the APD gain GAPD and energy resolution across a wide range of temperatures (from -20 °C to +60 °C) and bias voltages Vbias (from 260 V to 410 V). The primary goal was to experimentally determine the GAPD dependence on the and Vbias in order to establish a strategy for stabilizing GAPD by compensating for fluctuations, acting on Vbias.
View Article and Find Full Text PDFStochastic Filtering of the Attitude Quaternion.
Sensors (Basel)
December 2024
Mechanical Engineering Department, Ben-Gurion University of the Negev, Beer Sheva 84105, Israel.
Several stochastic H∞ filters for estimating the attitude of a rigid body from line-of-sight measurements and rate gyro readings are developed. The measurements are corrupted by white noise with unknown variances. Our approach consists of estimating the quaternion while attenuating the transmission gain from the unknown variances and initial errors to the current estimation error.
View Article and Find Full Text PDFA Health Risk Assessment of Workers Exposed to Organic Paint Solvents Used in the Korean Shipbuilding Industry.
Toxics
December 2024
Health and Safety Convergence Science Introduction, College of Health Science, Korea University, Seoul 02841, Republic of Korea.
In the shipbuilding industry, during the painting process, workers are exposed to various substances in paint, including organic solvents that can adversely affect their health. Most workplace exposures to organic solvents involve mixtures of organic compounds. Therefore, in this study, the hazard quotient (HQ) and hazard index (HI) were derived using data from the Workplace Environmental Monitoring Program in Korea for six organic solvents (xylene, n-butanol, ethylbenzene, isobutyl alcohol, toluene, and methylisobutyl ketone [MIBK]) commonly used in the steel shipbuilding industry.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!