MCM-48 mesoporous support was synthesized with the ionic solid 1-tetradecyl-3-methylimidazolium chloride ([CMI]Cl) as a structure-directing agent for in situ immobilization of Candida antarctica B (CALB). The MCM-48[CMI]Cl support showed characteristics of mesoporous material of interest, with a pore size of 20.30 and 73.41 A for the support without and with the enzyme, respectively. The elongation of the carbonic chain of the ionic solid directly influenced the increase in the specific area and pore volume of the material. In addition, the decrease in the specific area and pore volume for support with the enzyme showed the effectiveness of immobilization in situ. It was possible to obtain the ideal levels for the best activities of esterification of the enzyme with optimization of a mathematical model. The optimized variables were 0.31 g of enzyme and 3.35% of ionic solid with a maximum esterification activity of 392.92 U/g and 688% of yield. The support showed residual activity above 50% when stored under refrigeration for 75 days. At 60 and 80 °C, the enzyme immobilized on the support retained more than 80 and 40% of its residual activity, respectively. In addition, the support presented the possibility of reuse for up to 10 cycles with residual activity of approximately 50%. The support synthesized in the present study presents a great industrial opportunity for the immobilization and use of the CALB enzyme.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1007/s12010-021-03648-z | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Swelling Behavior of Anionic Hydrogels: Experiments and Modeling.
Gels
December 2024
Department of Industrial Engineering, University of Salerno, 84084 Fisciano, Italy.
Polyelectrolyte hydrogels are smart materials whose swelling behavior is governed by ionizable groups on their polymeric chains, making them sensitive to pH and ionic strength. This study combined experiments and modeling to characterize anionic hydrogels. Mechanical tests and gravimetric analyses were performed to track hydrogel mass over time and at a steady state under varying pH and salt concentrations.
View Article and Find Full Text PDFA Flexible Yet Robust 3D-Hybrid Gel Solid-State Electrolyte Based on Metal-Organic Frameworks for Rechargeable Lithium Metal Batteries.
Gels
December 2024
School of Chemistry and Materials Science, Guangdong University of Education, Guangzhou 510303, China.
Compared to traditional liquid electrolytes, solid electrolytes have received widespread attention due to their higher safety. In this work, a vinyl functionalized metal-organic framework porous material (MIL-101(Cr)-NH-Met, noted as MCN-M) is synthesized by postsynthetic modification. A novel three-dimensional hybrid gel composite solid electrolyte (GCSE-P/MCN-M) is successfully prepared via in situ gel reaction of a mixture containing multifunctional hybrid crosslinker (MCN-M), lithium bis(trifluoromethanesulfonyl)imide (LiTFSI), ethylene carbonate (EC), diethylene glycol monomethyl ether methacrylate (EGM) and polyethylene (vinylidene fluoridee) (PVDF).
View Article and Find Full Text PDFA Comparison of the Electrical Properties of Gel Polymer Electrolyte-Based Supercapacitors: A Review of Advances in Electrolyte Materials.
Gels
December 2024
Quantum Technologies Research Center, Science and Research Branch, Islamic, Azad University, Tehran 1477893855, Iran.
Flexible solid-state-based supercapacitors are in demand for the soft components used in electronics. The increased attention paid toward solid-state electrolytes could be due to their advantages, including no leakage, special separators, and improved safety. Gel polymer electrolytes (GPEs) are preferred in the energy storage field, likely owing to their safety, lack of leakage, and compatibility with various separators as well as their higher ionic conductivity (IC) than traditional solid electrolytes.
View Article and Find Full Text PDFUnlocking Solid-State Sodium-Metal Batteries at -15 °C by Electrolyte Optimization and Interface Regulation.
ACS Appl Mater Interfaces
December 2024
Tianjin Key Laboratory for Photoelectric Materials and Devices, School of Materials Science and Engineering, Tianjin University of Technology, Tianjin 300384, P.R. China.
Beta-AlO-based solid-state sodium metal batteries are some of the best options for large-scale energy storage systems because of their high energy density, high-level safety, and low cost. Nevertheless, their room-/low-temperature operation remains challenging due to low ionic conductivity of Beta-AlO electrolyte and weak solid-solid contact of the Na/Beta-AlO interface. Herein, an integrated strategy was developed via electrolyte optimization and interface regulation, in which Cu as a stabilizing agent was incorporated into Beta-AlO to improve density and ionic conductivity and the InS interface layer was introduced between the Na anode and solid electrolyte to induce the in situ formation of a mixed conductive layer (Na-In alloy and NaS).
View Article and Find Full Text PDFChallenges and Strategies of Low-Pressure All-Solid-State Batteries.
Adv Mater
December 2024
Eastern Institute for Advanced Study, Eastern Institute of Technology, Ningbo, 315200, China.
All-solid-state batteries (ASSBs) are regarded as promising next-generation energy storage technology owing to their inherent safety and high theoretical energy density. However, achieving and maintaining solid-solid electronic and ionic contact in ASSBs generally requires high-pressure fabrication and high-pressure operation, posing substantial challenges for large-scale production and application. In recent years, significant efforts are made to address these pressure-related challenges.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!