Unlabelled: was to develop composite film materials derived from modified sodium carboxymethyl cellulose and to evaluate their anti-adhesive effects.

Materials And Methods: The modified film materials were obtained by dissolving sodium carboxymethyl cellulose (Na-CMC) in an aqueous solution of a modifier (glycoluril) with subsequent homogenization and drying in a vacuum drying oven at room temperature. Physicomechanical parameters of the obtained films were determined using the Instron 3369 universal electromechanical testing machine (Great Britain) equipped with a climatic chamber (300-523 K), improved video extensometer, and the MKC-25 micrometer (Russia). Cytotoxicity of glycoluril-modified film materials derived from Na-CMC was studied by incubating cell cultures of 3T3-L1 mouse fibroblasts directly with extracts from films under study using a colorimetric test. Their anti-adhesion effect was investigated on 40 female Wistar rats by modeling a flat adhesion by inducing abrasion of the cecum and suturing the deserosed surface of the abdominal wall anatomically opposite the abrasion area. The presence of adhesions was assessed on day 8 after the operation. Commercial membrane Seprafilm (USA) was used as a reference sample.

Results: It was found that extracts obtained from film materials derived from Na-CMC modified with glycoluril at a concentration of 0.01 and 0.05 wt. % had no cytotoxic effect on the cell culture of mouse fibroblasts 3T3-L1. Flat adhesions were not detected when using Seprafilm. When film materials under study were placed in the abdominal cavity between the injured areas, formation of flat adhesions was not observed or observed in one case out of ten.

Conclusion: The obtained films are promising for preventing adhesions as a barrier-type agent. Modifying Na-CMC with glycoluril made it possible to create films that prevent formation of flat adhesions, have improved physical and mechanical properties and no cytotoxic effect.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC8353686PMC
http://dx.doi.org/10.17691/stm2021.13.1.04DOI Listing

Publication Analysis

Top Keywords

film materials
24
sodium carboxymethyl
12
carboxymethyl cellulose
12
materials derived
12
flat adhesions
12
composite film
8
derived na-cmc
8
mouse fibroblasts
8
formation flat
8
film
6

Similar Publications

The development of ultraviolet (UV) shielding materials is of great importance to protect human health and prevent the degradation of organic matter. However, the synthesis of highly efficient UV shielding polymer nanocomposites is currently limited by the agglomeration of inorganic anti-UV nanoparticles (NPs) within the polymer matrix and the limited absorption spectrum of UV shielding agents. In this study, highly effective manganese doped carbon quantum dots@halloysite nanotube composites (Mn-CDs@HNTs/PAS) were successfully synthesized by loading manganese-doped carbon quantum dots (Mn-CDs) into UV shielding effective halloysite nanotubes (HNTs) via the solvothermal method, followed by polymerization modification (PAS).

View Article and Find Full Text PDF

Photonic crystals (PC) play a key role in optical field modulation due to their unique photonic band gaps (PBGs). Anodic aluminum oxide (AAO) prepared by pulse anodization is a promising candidate for PC devices. In this research, an AAO-based PC with multi-band was fabricated on a single-slice & single-material film, which exhibits multi-band responses in the visible-to-near-infrared (vis-NIR) region.

View Article and Find Full Text PDF

Increasing attention to sustainability and cost-effectiveness in energy storage sector has catalyzed the rise of rechargeable Zinc-ion batteries (ZIBs). However, finding replacement for limited cycle-life Zn-anode is a major challenge. Molybdenum disulfide (MoS), an insertion-type 2D layered material, has shown promising characteristics as a ZIB anode.

View Article and Find Full Text PDF

Multicolored Bifacial Perovskite Solar Cells through Top Electrode Engineering.

ACS Appl Mater Interfaces

January 2025

Department of Microelectronic Science and Engineering, Ningbo University, Ningbo 315000, China.

Power generation and architectural beauty are equally important for designing efficient and esthetically appealing bifacial perovskite solar cells (PSCs). In this work, efficient and multicolored p-i-n-structured PSCs are achieved by taking advantage of a dielectric/metal/dielectric (DMD)-type (MoO/Ni/Ag/MoO) transparent counter electrode. The MoO/Ni underlayer effectively promotes the formation of a continuous and conductive ultrathin Ag transparent film, especially the 1 nm Ni seed layer adjusts the interface energy level between perovskite/MoO and Ag, resulting in Ohmic contact of the electrode to promote charge extraction and collection.

View Article and Find Full Text PDF

Atmosphere-controlled high-voltage electrospray (AHES) was utilised to modify the structure of chitosan (CS) films. The applied voltage in the AHES process ranged from 60 to 100 kV, with variations in the O content of the propellant gas from 0 to 100 %. The number density of cations in the charging environment reached 600 × 10 cations/cm.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!