Gangliosides smelt nanostructured amyloid Aβ(1-40) fibrils in a membrane lipid environment.

Biochim Biophys Acta Biomembr

Departamento de Química Biológica Ranwel Caputto, Facultad de Ciencias Químicas, Universidad Nacional de Córdoba, Argentina; Centro de Investigaciones en Química Biológica de Córdoba, CIQUIBIC, CONICET, Universidad Nacional de Córdoba, Argentina. Electronic address:

Published: February 2022

Gangliosides induced a smelting process in nanostructured amyloid fibril-like films throughout the surface properties contributed by glycosphingolipids when mixed with 1-palmitoyl-2-oleoyl-phosphatidylcholine (POPC)/Aβ(1-40) amyloid peptide. We observed a dynamical smelting process when pre-formed amyloid/phospholipid mixture is laterally mixed with gangliosides. This particular environment, gangliosides/phospholipid/Aβ(1-40) peptide mixed interfaces, showed complex miscibility behavior depending on gangliosides content. At 0% of ganglioside covered surface respect to POPC, Aβ(1-40) peptide forms fibril-like structure. In between 5 and 15% of gangliosides, the fibrils dissolve into irregular domains and they disappear when the proportion of gangliosides reach the 20%. The amyloid interfacial dissolving effect of gangliosides is taken place at lateral pressure equivalent to the organization of biological membranes. Domains formed at the interface are clearly evidenced by Brewster Angle Microscopy and Atomic Force Microscopy when the films are transferred onto a mica support. The domains are thioflavin T (ThT) positive when observed by fluorescence microscopy. We postulated that the smelting process of amyloids fibrils-like structure at the membrane surface provoked by gangliosides is a direct result of a new interfacial environment imposed by the complex glycosphingolipids. We add experimental evidence, for the first time, how a change in the lipid environment (increase in ganglioside proportion) induces a rapid loss of the asymmetric structure of amyloid fibrils by a simple modification of the membrane condition (a more physiological situation).

Download full-text PDF

Source
http://dx.doi.org/10.1016/j.bbamem.2021.183749DOI Listing

Publication Analysis

Top Keywords

smelting process
12
gangliosides
8
nanostructured amyloid
8
lipid environment
8
amyloid
5
gangliosides smelt
4
smelt nanostructured
4
amyloid aβ1-40
4
aβ1-40 fibrils
4
fibrils membrane
4

Similar Publications

Scandium (Sc) extraction from iron and aluminum waste is a promising technique for the recycling and valorization of laterite nickel ore waste. Iron and aluminum waste is one source of scandium during preparation of nickel and cobalt hydroxide by wet smelting of laterite nickel ore. The content of Sc is notably higher than that of the raw materials, as the element is enriched in the iron and aluminum waste.

View Article and Find Full Text PDF

In the process of zinc hydrometallurgy, the content of fluorine in zinc sulfate solution directly affects the stripping of the zinc plate, which easily leads to the deterioration of working conditions. It not only has a serious impact on the entire zinc hydrometallurgical system but also causes huge economic losses. Especially in the process of zinc secondary resource utilization, the concentration of fluoride ions in the electrolyte exceeds the control standard of smelting enterprises, which has become a long-term technical challenge in the smelting industry.

View Article and Find Full Text PDF

What Is Already Known About This Topic?: Lower extremity musculoskeletal diseases (LE-MSDs) have emerged as a significant contributor to the global disease economic burden and worker absenteeism, becoming a global public health concern. However, the epidemic characteristics of LE-MSDs among occupational populations in China are unknown.

What Is Added By This Report?: This report finds that the LE-MSDs prevalence rate among key occupational groups in China is 17.

View Article and Find Full Text PDF

In this study, the effects of using different scrap ratios in a converter on carbon emissions were analyzed based on life cycle assessment (LCA) theory, and the carbon emissions from the converter were evaluated with the use of coke and biochar as heating agents at high scrap ratios. In this industrial experiment, the CO emissions during the converter smelting process decreased with the increase in the scrap steel ratio. For every 1% increase in the scrap steel ratio, the carbon emissions during the steelmaking process decreased by 14.

View Article and Find Full Text PDF

PbSO reaction mechanism in oxygen and reduction atmospheres during co-smelting process with primary lead material.

Waste Manag

January 2025

School of Metallurgy and Environment, Central South University, Changsha 410083 China; State Key Laboratory of Advanced Metallurgy for Non-ferrous Metals, Changsha 410083 China; Chinese National Engineering Research Center for Control & Treatment of Heavy Metal Pollution, Changsha 410083 China. Electronic address:

At present, lead-containing wastes have increasingly become the raw materials together with primary lead concentrate for lead production to meet the ever-increasing lead demand market. PbSO is the dominant component in the lead-containing wastes, nevertheless, its reaction behavior during lead smelting is not sufficiently investigated. This study investigated PbSO decomposition behaviors and phase transformation mechanisms at oxidizing and reductive atmospheres and various gas flow rates.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!