The corrosion behavior of two silicon steels with the same chemical composition but different grains sizes (i.e., average grain area of 115.6 and 4265.9 µm) was investigated by metallographic microscope, gravimetric, electrochemical and surface analysis techniques. The gravimetric and electrochemical results showed that the corrosion rate increased with decreasing the grain size. The scanning electron microscopy/energy dispersive x-ray spectroscopy and X-ray photoelectron spectroscopyanalyses revealed formation of a more homogeneous and compact corrosion product layer on the coarse-grained steel compared to fine-grained material. The Volta potential analysis, carried out on both steels, revealed formation of micro-galvanic sites at the grain boundaries and triple junctions. The results indicated that the decrease in corrosion resistance in the fine-grained steel could be attributed to the higher density of grain boundaries (e.g., a higher number of active sites and defects) brought by the refinement. The higher density of active sites at grain boundaries promote the metal dissolution of the and decreased the stability of the corrosion product layerformed on the metal surface.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC8433828 | PMC |
| http://dx.doi.org/10.3390/ma14175084 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Manipulating Mechanical Forces in the Developing Zebrafish Heart Using Magnetic Beads.
J Vis Exp
January 2025
Department of Bioengineering, Imperial College London; The Francis Crick Institute;
Mechanical forces continuously provide feedback to heart valve morphogenetic programs. In zebrafish, cardiac valve development relies on heart contraction and physical stimuli generated by the beating heart. Intracardiac hemodynamics, driven by blood flow, emerge as fundamental information shaping the development of the embryonic heart.
View Article and Find Full Text PDF"Nano-In-Nano" Schottky Diodes Fabricated by Combining Self-Aligned Nanogap Patterning with Bottom-Up ZnO Nanowire Growth.
ACS Appl Electron Mater
January 2025
Electrical Engineering Division, Engineering Department, University of Cambridge, Cambridge CB3 0FA, U.K.
Nanoscale semiconductors offer significant advantages over their bulk semiconductor equivalents for electronic devices as a result of the ability to geometrically tune electronic properties, the absence of internal grain boundaries, and the very low absolute number of defects that are present in such small volumes of material. However, these advantages can only be realized if reliable contacts can be made to the nanoscale semiconductor using a scalable, low-cost process. Although there are many low-cost "bottom-up" techniques for directly growing nanomaterials, the fabrication of contacts at the nanoscale usually requires expensive and slow techniques like e-beam lithography that are also hard to scale to a level of throughput that is required for commercialization.
View Article and Find Full Text PDFLeveraging deep learning for robust EEG analysis in mental health monitoring.
Front Neuroinform
January 2025
Hefei University, Hefei, China.
Introduction: Mental health monitoring utilizing EEG analysis has garnered notable interest due to the non-invasive characteristics and rich temporal information encoded in EEG signals, which are indicative of cognitive and emotional conditions. Conventional methods for EEG-based mental health evaluation often depend on manually crafted features or basic machine learning approaches, like support vector classifiers or superficial neural networks. Despite the potential of these approaches, they often fall short in capturing the intricate spatiotemporal relationships within EEG data, leading to lower classification accuracy and poor adaptability across various populations and mental health scenarios.
View Article and Find Full Text PDFImpact of Functional Fluorinated Porphyrins on the Efficiency and Stability of Perovskite Solar Cells.
Small
January 2025
Department of Chemistry, i-Center for Advanced Science and Technology (i-CAST), Innovation and Development Center of Sustainable Agriculture (IDCSA), National Chung Hsing University, Taichung, 402202, Taiwan.
Additives play a pivotal role in enhancing the efficiency of perovskite solar cells (PSCs), and carefully designed additives contribute to major breakthroughs in device performance. In this study, a series of novel A-π-A-type porphyrin derivatives-PPH-1, PPH-2, and PPF-1-are synthesized, each incorporating pyridyl groups, specifically engineered to function as passivation agents for PSCs. The electron-withdrawing properties of fluorine in PPF-1 increase the molecular polarity, thereby strengthening its interaction with the perovskite and enhancing the passivation efficacy.
View Article and Find Full Text PDFBoosting Thermoelectric Performance of Semicrystalline Conducting Polymers by Simply Adding Nucleating Agent.
Adv Mater
January 2025
State Key Laboratory of Structural Chemistry, CAS Key Laboratory of Design and Assembly of Functional Nanostructures and Fujian Key Laboratory of Nanomaterials, Fujian Institute of Research on the Structure of Matter, Chinese Academy of Sciences (CAS), Fuzhou, Fujian, 350002, China.
Controlling the microstructure of semiconducting polymers is critical for optimizing thermoelectric performance, yet remains challenging, requiring complex processing techniques like alignment. In this study, a straightforward strategy is introduced to enhance the thermoelectric properties of semi-crystalline polymer films by incorporating minimal amounts of nucleating agents, a method widely used in traditional polymer industries. By blending less than 1 wt% of N,N'-(1,4-phenyl)diisonicotinamide (PDA) into poly(2,5-bis(3-alkylthiophen-2-yl)thieno[3,2-b]thiophene) (PBTTT-C14), controlled modulation of crystallization behavior is achieved, resulting in reduced structural disorder and enhanced charge carrier mobility.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!