Composite Memristors by Nanoscale Modification of Hf/Ta Anodic Oxides.

J Phys Chem Lett

Institute of Chemical Technology of Inorganic Materials, Johannes Kepler University Linz, Altenberger Str. 69, 4040 Linz, Austria.

Published: September 2021

Composite memristors based on anodic oxidation of Hf superimposed on Ta thin films are studied. A layered structure is obtained by successive sputtering of Ta and Hf thin films. The deposition geometry ensured components' thickness gradient profiles (wedges) aligned in opposite directions. Anodization in citrate buffer electrolyte leads to a nanoscale columnar structuring of TaO in HfO due to the higher electrical resistance of the latter. Following the less resistive path, the ionic current forces Ta oxide to locally grow toward the electrolyte interface according to the Rayleigh-Taylor principle. The obtained composite oxide memristive properties are studied as a function of the Hf/Ta thickness ratio. One pronounced zone prominent for memristive applications is found for ratios between 4 and 5. Here, unipolar and bipolar memristors are found, with remarkable endurance and retention capabilities. This is discussed in the frame of conductive filament formation preferentially along the interfaces between oxides.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC8474145PMC
http://dx.doi.org/10.1021/acs.jpclett.1c02346DOI Listing

Publication Analysis

Top Keywords

composite memristors
8
thin films
8
memristors nanoscale
4
nanoscale modification
4
modification hf/ta
4
hf/ta anodic
4
anodic oxides
4
oxides composite
4
memristors based
4
based anodic
4

Similar Publications

Aluminum nitride (AlN) with a wide band gap (approximately 6.2 eV) has attractive characteristics, including high thermal conductivity, a high dielectric constant, and good insulating properties, which are suitable for the field of resistive random access memory. AlN thin films were deposited on ITO substrate using the radio-frequency magnetron sputtering technique.

View Article and Find Full Text PDF

High-Entropy Oxides: Pioneering the Future of Multifunctional Materials.

ACS Nano

December 2024

College of Textiles, Innovation Center for Textile Science and Technology, Donghua University, Shanghai 201620, China.

Article Synopsis
  • * HEOs exhibit unique effects such as sluggish diffusion and severe lattice distortion, leading to improved mechanical, electrical, optical, thermal, and magnetic properties suitable for a variety of applications beyond catalysts and batteries.
  • * The review discusses the structure and composition of HEOs, highlights their diverse applications (like transistors and photodetectors), and introduces future trends in intelligent design and high-throughput screening for optimized HEO development.
View Article and Find Full Text PDF

Non-volatile memristors dynamically switch between high (HRS) and low resistance states (LRS) in response to electrical stimuli, essential for electronic memories, neuromorphic computing, and artificial intelligence. High-entropy Prussian blue analogs (HE-PBAs) are promising insertion-type battery materials due to their diverse composition, high structural integrity, and favorable ionic conductivity. This work proposes a non-volatile, bipolar memristor based on HE-PBA.

View Article and Find Full Text PDF

Over the past decade, metal oxide semiconductors have attracted considerable attention because of their transparency, high intrinsic charge carrier mobility, and charge carrier density. Metal oxide semiconductors also provide a promising route to develop resistive memory devices because of the tunability of their conductivity via the removal of oxygen ions, forming oxygen vacancies that can act as electron donors. Here, this paper reports the fabrication of a resistive random-access memory (ReRAM) device with TiO and TiO layers and introduces a solution-processed InO-graphene oxide (GO) buffer layer from a water-based precursor solution to tune the switching characteristics.

View Article and Find Full Text PDF

The Fabrication of Polyimide-Based Tunable Charge Traps Ternary Memristors Doped with Ni-Co Coated Carbon Composite Nanofibers.

Polymers (Basel)

October 2024

Key Laboratory of Engineering Dielectric and Its Application Ministry of Education, Harbin University of Science and Technology, Harbin 150080, China.

In the dynamic fields of information science and electronic technology, there is a notable trend towards leveraging carbon materials, favored for their ease of synthesis, biocompatibility, and abundance. This trend is particularly evident in the development of memristors, benefiting from the unique electronic properties of carbon to enhance device performance. This study utilizes sensitized chemical evaporation and spin-coating carbonization techniques to fabricate nickel-cobalt coated carbon composite nanofibers (SC-NCMNTs).

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!