Degradation and partial oxidation of waste plastic express packaging bags in supercritical water: Resources transformation and pollutants removal.

Millions of waste plastic express packaging bags (PEPBs) were generated with the rapid development of the express delivery industry due to the boom of electronic commerce. Waste PEPBs contain polyethylene (PE) material and large number of pollutants such as plasticizers and flame retardants. In this study, two effective and environmental-friendly methods were proposed to produce valuable products and remove pollutants from waste PEPBs by supercritical water degradation (SCWD) and supercritical water partial oxidation (SCWPO) treatments. Both SCWD and SCWPO treatments could effectively obtain valuable products (wax, liquid oil, CaCO) and remove bisphenol A (BPA) and di-(2-ethylhexyl) phthalate (DEHP) from waste PEPBs. No obvious difference about the conversion could be found between SCWD and SCWPO treatments. 425 °C, 60 min, solid-to-liquid ratio of 1:20 g/mL, and V(HO):V(HO) ratio of 1:3 mL/mL were the optimal conditions for the conversion of waste PEPBs by SCWD and SCWPO treatments. The maximum conversion could reach 98.13%. The produced wax and liquid oil were easily separated from each other. The produced wax mainly included long-chain olefins or long-chain alkanes, and a small amount of alcohols, ethers and aldehydes. SCWD treatment was favorable for obtaining long-chain alkenes, while SCWPO treatment was favorable for obtaining long-chain alkanes. The main chemical compounds contained in the produced liquid oil were decomposed from DEHP and BPA. DEHP was decomposed to produce 2-ethyl-1-hexanol and acetophenone. BPA was decomposed to produce 4-tert-butylphenol and other alkylated derivatives of benzene and phenol. In comparison with SCWD treatment, DEHP and BPA could be decomposed more thoroughly by SCWPO treatment.