Aim: To analyze surface roughness and three-dimensional (3D) scanning topography parameters of zirconia implants before and after photofunctionalization by atomic force microscopy (AFM).
Materials And Methods: Ten commercially available zirconia implants five each in the study and control group were taken. The study group was subjected to ultraviolet (UV) radiation for 48 h using the shorter wavelength of 254 nm. After washing all the implants with 70% alcohol and drying, 3D surface topography and roughness parameters were analyzed using CSC 17 probe AFM at three different magnifications 25 μm, 50 μm, and 80 μm, respectively.
Results: The surface topography and calculated mean amplitude, spatial, and hybrid parameters of the study group were higher than the control group ( < 0.05) in all three magnifications. Up to scale depth and peak value for the study and control group were (-0.4-0.4: -2-1) (-0.75 to 0.6:-1-1.3) (-0.75--0.5: -1.5-1.3) for the study and control group at 25, 50, and 80 μm magnification, respectively. This indicates that photofunctionalization increased surface roughness of Zirconia implants to desirable extent.
Conclusion: There is a definite difference in the quantitative topographic characteristics with zirconia implants being microroughned after photofunctionalization (UV treatment).
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC8375956 | PMC |
| http://dx.doi.org/10.4103/jpbs.JPBS_724_20 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Fixed Full-Arch Implant-Supported Restorations: Techniques Review and Proposal for Improvement.
Dent J (Basel)
December 2024
Department of Implant-Prosthetic Therapy, Faculty of Dentistry, "Carol Davila" University of Medicine and Pharmacy, 050474 Bucharest, Romania.
Full-arch zirconia restorations on implants have gained popularity due to zirconia's strength and aesthetics, yet they are still associated with challenges like structural fractures, peri-implant complications, and design misfits. Advances in CAD/CAM and digital workflows offer potential improvements, but a technique that consistently addresses these issues in fixed, full-arch, implant-supported prostheses is needed. This novel technique integrates a facially and prosthetically driven treatment approach, which is divided into three phases: data acquisition, restoration design, and manufacturing/delivery.
View Article and Find Full Text PDFMarginal Bone Loss Around the Implant: A Retrospective Analysis of Bone Remodeling Over Five Years of Follow-Up.
Cureus
December 2024
Regina Maria Dental Department, Regina Maria Private Healthcare Network, Bucharest, ROU.
Introduction: Bone remodeling around implants in implant-supported rehabilitation is a continuous debate with no consensus in the literature. This study aimed to investigate the implant- and patient-specific factors contributing to marginal bone loss near the implant.
Materials And Methods: We included patients who had implant-supported prosthetic rehabilitation using one implant system, between 2014 and 2018, who had full follow-up documentation and orthopantomography over five years, and who had no unwell-controlled systemic pathologies that may influence bone metabolism.
One-Piece Monolithic Zirconia Single Tooth Implant-Supported Restorations in the Posterior Region: A 1-Year Prospective Case Series Study.
Clin Oral Implants Res
December 2024
Department of Oral and Maxillofacial Surgery, University of Groningen, University Medical Center Groningen, Groningen, The Netherlands.
Objective: To assess the clinical, radiographic and patient-reported outcome measures, and the success of screw-retained one-piece monolithic zirconia implant-supported restorations in the posterior region during a 1-year follow-up.
Methods: In a prospective case series, 50 single molar sites in the posterior region of 41 patients with a minimum age of 18 years and sufficient bone volume for placing an implant (≥ 8 mm) and space for an anatomical restoration were included. Following prosthetic-driven digital three-dimensional treatment planning, a tissue-level implant with an internal connection was inserted during a one-stage surgical procedure.
Biomechanical behavior of cantilevered 3-unit implant-supported prostheses made of PEKK and monolithic zirconia: A finite element study.
J Mech Behav Biomed Mater
December 2024
Oral Technology, Dental School, University Hospital Bonn, Bonn, Germany. Electronic address:
Article Synopsis
- The study aimed to assess the biomechanical performance of different designs of three-unit implant-supported prostheses using two materials (Zirconia and PEKK) under various loading conditions.
- Three models were created with different implant placements to analyze three designs: distal cantilever, fixed-fixed, and mesial cantilever, utilizing finite element analysis for stress evaluation.
- Results indicated that the fixed-fixed design performed best, with PEKK showing lower stress in some areas but higher stress in others compared to Zirconia, highlighting the importance of design and material choice in prosthodontics.
Esthetic and Functional Rehabilitation: Retreatment of Anterior Fixed Dental Prothesis With Biologically Oriented Preparation Technique and Digital Workflow.
J Esthet Restor Dent
December 2024
Analysis of Techniques, Material and Instruments Applied to Digital Dentistry and CAD/CAM Procedures Research Group, University Complutense of Madrid, Madrid, Spain.
Objective: This clinical case describes a multidisciplinary retreatment of a patient with anterior fixed dental prostheses (FDPs) using minimally invasive restorations and a biologically oriented preparation technique (BOPT).
Clinical Considerations: A 56-year-old female patient, treated 30 years ago with a metal-ceramic FDP due to dental agenesis, presented a misfit prosthesis at the gingival margin, black spaces, and food retention at the pontics. Notably, tooth number 2.
Want AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!