Background: Titanium has been used in osteosynthesis for decades and its compatibility and safety is unquestioned. Studies have shown that there is release and collection of titanium in the organ systems with little note of toxicity. The gold standard is considered to be titanium osteosynthesis plate produced by milling methods. The use of customized titanium plates produced with 3D printing, specifically direct metal laser sintering, have found increasing use in recent years. It is unknown how much titanium is released in these printed titanium implants, which is known to be potentially porous, depending on the heat settings of the printer. We hypothesize that the amount of titanium released in printed titanium implants may be potentially more or equal compared to the gold standard, which is the implant produced by milling.
Methods: We studied the biosafety of this technology and its products by measuring serum and organ titanium levels after implantation of 3D-printed versus traditionally fabrication titanium plates and screws in a pilot study using the rabbit model. A total of nine rabbits were used, with three each in the control, milled and printed titanium group. The animals were euthanized after six months. Serum and organs of the reticuloendothelial system were harvested, digested and assayed for titanium levels.
Results: Organ and serum titanium levels were significantly higher in rabbit subjects implanted with titanium implants (milled and printed) compared to the control group. However, there was no significant difference in organ and serum titanium levels of subjects implanted with milled and traditionally fabricated titanium implants.
Conclusions: The biosafety of use of 3D-printed titanium implants and traditionally fabricated titanium implants are comparable. With this in mind, 3D-printed custom implants can not only replace, but will very possibly surpass traditionally fabricated titanium implants in the mode and extent of use.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC8395183 | PMC |
| http://dx.doi.org/10.3390/ijms22168480 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Intracranial Hypotension Mechanism and Implant Retention Procedure for Patients With Titanium Mesh Exposure.
Oper Neurosurg (Hagerstown)
January 2025
Department of Neurosurgery, Huashan Hospital, Shanghai Medical College, Fudan University, Shanghai, China.
Background And Objectives: The study aimed to investigate the potential pathogenesis and present an implant retention procedure for patients with titanium mesh exposure after cranioplasty.
Methods: The clinical data were obtained from 26 consecutive cases with titanium mesh exposure who underwent surgical treatment between 2018 and 2023. These patients' medical records, scalp photographs, operative notes, and outcomes were retrospectively analyzed.
Peri-implant tissue definition and registration with a 3D-printed emergence profile former on titanium stock healing abutment: A dental technique and clinical report.
J Prosthodont
January 2025
ITI Scholarship Center, Center for Implant, Esthetic and Innovative Dentistry, Indiana University School of Dentistry, Indianapolis, Indiana, USA.
Recent focus has shifted toward refining the soft tissue emergence profile to enhance aesthetics, support peri-implant health, and ensure long-term success. Traditionally, titanium stock healing abutments or chairside-customized abutments were used to shape peri-implant tissues and develop the emergence profile for implant-supported prostheses. However, advancements in digital dentistry now allow for more precise customization and increased treatment efficiency.
View Article and Find Full Text PDFConstruction and high-throughput screening of gradient nanowire coatings on titanium surface towards ameliorated osseointegration.
Mater Today Bio
February 2025
Shanxi Key Laboratory of Biomedical Metal Materials, College of Materials Science and Engineering, Taiyuan University of Technology, Taiyuan, 030024, China.
Surface nano-modification has emerged as an effective strategy to enhance osseointegration of titanium (Ti) implants. Despite its promise, rational optimization of surface nanomorphology for ameliorated osseointegration remains a significant challenge. Our research pioneering developed a one-step alkali etching technique to produce a gradient nanowire coating with continuously varied dimensions on Ti surfaces, which was subsequently served as a versatile platform for high-throughput screening of optimal dimensions to enhance osseointegration.
View Article and Find Full Text PDFMolding Quality and Biological Evaluation of a Two-Stage Titanium Alloy Dental Implant Based on Combined 3D Printing and Subtracting Manufacturing.
ACS Omega
December 2024
State Key Laboratory of Oral & Maxillofacial Reconstruction and Regeneration & National Clinical Research Center for Oral Diseases & Shaanxi Engineering Research Center for Dental Materials and Advanced Manufacture, Department of Oral Implants, School of Stomatology, The Fourth Military Medical University, Xi'an 710032, Shaanxi, P. R. China.
Metal 3D printing has been used in the manufacturing of dental implants. Its technical advantages include high material utilization and the capacity to form arbitrarily complex structures. However, 3D printing alone is insufficient for manufacturing two-stage titanium implants due to the limited precision in printing titanium alloy parts.
View Article and Find Full Text PDFAntibacterial properties of copper-tantalum thin films: The impact of copper content and thermal treatment on implant coatings.
Heliyon
January 2025
D. Serikbayev East Kazakhstan Technical University, Oskemen, 070000, Kazakhstan.
This study evaluates the antibacterial properties and physicochemical characteristics of -tantalum-copper (Ta-Cu) coatings deposited on titanium alloy substrates using high-power magnetron sputtering. Implant-associated infections, particularly those caused by bacterial adhesion and biofilm formation, pose significant challenges in the field of orthopedic and dental implants. To address these issues, Ta-Cu coatings with varying copper content (∼3.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!