In this study we evaluated the oil adsorption capacity of an aliphatic polyurethane foam (PU ) and two of its composites, produced through surface coating using microparticles of silica (PU-Si ) and activated carbon (PU-ac ). The oil adsorption capacity in diesel was improved up to 36% using the composite with silica and up to 50% using the composite with activated carbon with respect to the initial PU . Excellent performances were retained in gasoline and motor oil. The adsorption was complete after a few seconds. The process follows a monolayer adsorption fitted by the Langmuir isotherm, with a maximum adsorption capacity of 29.50 g/g of diesel for the composite with activated carbon (PU-ac ). These materials were proved to be highly oleophilic for oil removal from fresh water and sea water samples. Regeneration and reuse can be repeated up to 50 times by centrifugation, without a significant loss in adsorption capacity.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC8402441 | PMC |
| http://dx.doi.org/10.3390/toxics9080186 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Efficient adsorptive removal of Congo Red dye using activated carbon derived from Spathodea campanulata flowers.
Sci Rep
January 2025
Department of Chemical Engineering, Manipal Institute of Technology, Manipal Academy of Higher Education, Manipal, Karnataka, 576104, India.
This report investigates the preparation, characterization, and application of activated carbon derived from Spathodea campanulata flowers (SCAC) to remove Congo Red (CR) dye from aqueous streams. SCAC was synthesized using orthophosphoric acid activation which yielded a mesoporous material with a specific surface area of (986.41 m/g), significantly exceeding values reported for flower-derived activated carbons in the available literature.
View Article and Find Full Text PDFEfficient continuous SF/N separation using low-cost and robust metal-organic frameworks composites.
Nat Commun
January 2025
Key Laboratory of Biomass Chemical Engineering of Ministry of Education, College of Chemical and Biological Engineering, Zhejiang University, Hangzhou, Zhejiang, China.
Physisorption presents a promising alternative to cryogenic distillation for capturing the most potent greenhouse gas, SF, but existing adsorbents face challenges in meeting diverse chemical and engineering concerns. Herein, with insights into in-pore chemistry and industrial process design, we report a systematic investigation that constructed two low-cost composites pellets (Al(fum)@2%HPC and Al(fum)@5%Kaolin) coupled with an innovative two-stage Vacuum Temperature Swing Adsorption (VTSA) process for the ultra-efficient recovery of low-concentration SF from N. Record-high selectivities (> 2×10) and SF dynamic capacities (~ 2.
View Article and Find Full Text PDFTetracycline removal from aqueous media and hospital wastewater using a magnetic composite of mango lignocellulosic kernel biochar/MnFeO/Cu@Zn-BDC MOF.
Int J Biol Macromol
January 2025
Department of Mechanical Engineering, Faculty of Engineering, Xi'an Technological University, Shaanxi, China. Electronic address:
This study explored the use of mango lignocellulosic kernel biochar (MKB) modified with MnFeO magnetic nanoparticles and a Cu@Zn-BDC metal-organic framework (MOF) (MKB/MnFeO/Cu@Zn-BDC MOF) for tetracycline (TC) removal from aqueous solutions and hospital wastewater. The modified biochar exhibited strong magnetic properties (19.803 emu/g) and a specific surface area of 30.
View Article and Find Full Text PDFHigh efficiency adsorption of boron by sodium alginate/polyethyleneimine/polysiloxane composite aerogel.
Int J Biol Macromol
January 2025
School of Light Industry & Chemical Engineering, Dalian Polytechnic University, Dalian 116034, PR China. Electronic address:
In this work, a new biomass boron adsorbent of N-methyl-D-glucosamine embedded sodium alginate/polyethyleneimine/polysiloxane composite aerogel (SKPN) was reported. Relevant characterization proved that the aerogel exhibited 3D porous structure with plenty of hydroxyl and amino functional groups, which was beneficial to the diffusion of boron and the chelation between boron and SKPN. Various parameters affecting the adsorption performance including pH value, contact time initial concentration, temperature and reusability were investigated.
View Article and Find Full Text PDFA Schiff base-functionalized chitosan magnetic bio-nanocomposite for efficient removal of Pb (II) and Cd (II) ions from aqueous solutions.
Int J Biol Macromol
January 2025
Department of Chemistry, Faculty of Science, Arak University, Arak 38481-77584, Iran; Institute of Nanosciences &Nanotechnology, Arak University, Arak, Iran. Electronic address:
The rapid industrialization and human activities in catchments have posed notable global challenges in removing of heavy metal contaminants from wastewater. Here, Schiff-bases (SB) of cyanoguanidine (CG) and salicylaldehyde (SA) were covalently grafted on a magnetic nanocomposite of chitosan to form a hybrid magnetic nanostructure (FeO@CS-CGSB). The synthesized structure was characterized using various techniques such as Fourier transform infrared spectroscopy (FT-IR), field emission scanning electron microscopy (SEM), transmission electron microscopy (TEM), powder X-ray diffraction (XRD), thermogravimetric analysis (TGA), vibrating sample magnetometry (VSM), dynamic light scattering (DLS), zeta potential, and Brunauer-Emmett-Teller surface area analysis (BET).
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!