Molecular insight into the variation of dissolved organic phosphorus in a wastewater treatment plant.

To date, eutrophication becomes a great concern of vulnerable aquatic systems. Dissolved organic phosphorus (DOP) discharged from wastewater treatment plant (WWTP) holds a large source of phosphorus in receiving water. However, due to the complexity of DOP, their variation and fate in WWTP remain unknown at the molecular level, and are always overlooked. Here, the variation of DOP in a WWTP was uncovered via Fourier transform-ion cyclotron resonance mass spectrometry (FT-ICR MS). Results show that 95% of DOP in the influent could be removed by the secondary biological treatment processes. The removed DOP species were mainly lipids with the molecular characteristics of low oxygen content, low unsaturation and low aromaticity. Meanwhile, during biological treatments, some new DOP species, especially lignin/carboxylic rich alicyclic molecules (CRAM) that possessed high oxygen content, high unsaturation and high aromaticity, were produced and released into the secondary effluent. In the subsequent tertiary treatment, coagulation by aluminum salt tended to remove high molecular weight and high oxygen content DOP species in the secondary effluent, which was complementary to the biological treatment. However, the sand filter usually retained microorganisms, which would result in the generation of new DOP species in this process. During the final ultraviolet disinfection process, DOP was effectively mineralized to phosphate, especially the species with high molecular weight and highly unsaturated aromatic DOP species (e.g., lignin/CRAM and tannin), which had higher UV absorbance. The revealed variation of DOP in WWTP is beneficial to optimize the treatment processes to enhance the removal of DOP.