Biocompatible glycero (9,10-trioxolane) trioleate (ozonide of oleic acid triglyceride, OTOA) was incorporated into polylactic acid (PLA) fibers by electrospinning and nonwoven PLA mats with 1%, 3% and 5% OTOA content. The morphological, mechanical, thermal and water sorption properties of electrospun PLA mats after the addition of OTOA were studied. A morphological analysis showed that the addition of OTOA increased the average fiber diameter and induced the formation of pores on the fiber surface, leading to an increase in the specific surface area for OTOA-modified PLA fibrous mats. PLA fiber mats with 3% OTOA content were characterized by a highly porous surface morphology, an increased specific surface area and high-water sorption. Differential scanning calorimetry (DSC) was used to analyze the thermal properties of the fibrous PLA mats. The glass transition temperatures of the fibers from the PLA-OTOA composites decreased as the OTOA content increased, which was attributed to the plasticizing effect of OTOA. DSC results showed that OTOA aided the PLA amorphization process, thus reducing the crystallinity of the obtained nonwoven PLA-OTOA materials. An analysis of the mechanical properties showed that the tensile strength of electrospun PLA mats was improved by the addition of OTOA. Additionally, fibrous PLA mats with 3% OTOA content showed increased elasticity compared to the pristine PLA material. The obtained porous PLA electrospun fibers with the optimal 3% OTOA content have the potential for various biomedical applications such as drug delivery and in tissue engineering.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC8347465 | PMC |
| http://dx.doi.org/10.3390/polym13152517 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Obesity and Metabolic Disease Impair the Anabolic Response to Protein Supplementation and Resistance Exercise: A Retrospective Analysis of a Randomized Clinical Trial with Implications for Aging, Sarcopenic Obesity, and Weight Management.
Nutrients
December 2024
Exerkine Corporation, McMaster University Medical Center, Hamilton, ON L8N 3Z5, Canada.
Background: Anabolic resistance accelerates muscle loss in aging and obesity, thus predisposing to sarcopenic obesity.
Methods: In this retrospective analysis of a randomized clinical trial, we examined baseline predictors of the adaptive response to three months of home-based resistance exercise, daily physical activity, and protein-based, multi-ingredient supplementation (MIS) in a cohort of free-living, older males ( = 32).
Results: Multiple linear regression analyses revealed that obesity and a Global Risk Index for metabolic syndrome (MetS) were the strongest predictors of Δ% gains in lean mass (TLM and ASM), LM/body fat ratios (TLM/%BF, ASM/FM, and ASM/%BF), and allometric LM (ASMI, TLM/BW, TLM/BMI, ASM/BW), with moderately strong, negative correlations to the adaptive response to polytherapy r = -0.
Polylactic Acid/Bamboo Leaf Extract Electrospun Mats with Antioxidant Activity for Food Packaging Applications.
Antioxidants (Basel)
December 2024
Department of Engineering, University of Palermo, Viale delle Scienze, 90128 Palermo, Italy.
This study focuses on developing an active and biodegradable packaging using electrospinning, with polylactic acid (PLA) as the matrix and bamboo leaf extract (BLE) as the antioxidant compound. The research systematically evaluates the relationship among process parameters, material properties, and structure. The electrospun membranes were produced using different BLE contents (10 wt%, 20 wt%, 30 wt%, and 40 wt%) and characterized by their morphology, mechanical properties, wettability, and antioxidant activity.
View Article and Find Full Text PDFTailoring the Mechanical Properties of Fungal Mycelium Mats with Material Extrusion Additive Manufacturing of PHBH and PLA Biopolymers.
ACS Omega
December 2024
Faculty V Mechanical Engineering and Transport Systems, Institute of Mechanics, Chair of Stability and Failure of Functionally Optimized Structures, Technische Universität Berlin, Berlin 10623, Germany.
To advance the concept of a circular economy, fungal mycelium-based materials are drawing increased attention as substitutes for nonsustainable materials, such as petroleum-based and animal-derived products, due to their biodegradability, low carbon footprint, and cruelty-free nature. Addressing the challenge of mechanical properties in fungal mycelium products, this study presents a straightforward approach for reinforcing fungal mycelium mats. This is achieved by using two bio-based and biodegradable polymers, poly(3-hydroxybutyrate--3-hydroxyhexanoate) (PHBH) and polylactic acid (PLA), via material extrusion additive manufacturing (MEX AM), commonly known as 3D printing, to produce fungal mycelium-biopolymer composites.
View Article and Find Full Text PDFFunctionalized cellulose nanocrystals reinforced PLA-gelatin electrospun fibers for potential antibacterial wound dressing and coating applications.
Int J Biol Macromol
January 2025
Polymer Technology, School of Chemical Engineering, Aalto University, 02150 Espoo, Finland. Electronic address:
This study addresses the critical need for effective antibacterial materials by exploring the innovative integration of dimethyloctadecyl [3-(trimethoxysilyl)propyl] ammonium chloride (DTSACl) onto cellulose nanocrystal (CNC), followed by its incorporation into polylactic acid and gelatin matrices to engineer antibacterial nanofiber mats. The modification of CNC with DTSACl (QACNC) was studied and confirmed by FT-IR, C NMR, and XRD analysis. Furthermore, the impact of such addition on the morphology, mechanical, hydrophobic properties, and antibacterial efficacy of the resultant QACNC nanofibers were thoroughly investigated.
View Article and Find Full Text PDFLignin-containing cellulose nanocrystals enhanced electrospun polylactic acid-based nanofibrous mats: Strengthen and toughen.
Int J Biol Macromol
September 2024
Jiangsu Co-Innovation Center for Efficient Processing and Utilization of Forest Resources, Jiangsu Provincial Key Lab of Pulp and Paper Science and Technology, Nanjing Forestry University, Nanjing 210037, China.
Biodegradable polylactic acid (PLA) nanofibrous mats prepared by electrospinning serve as suitable packaging materials. However, their practical applications are limited by their weak mechanical properties, poor thermal stability, and high cost. In this study, green and low-cost lignin-containing cellulose nanocrystals (LCNCs) with different lignin contents were developed and employed as reinforced materials to synergistically enhance the thermal, mechanical, and hydrophobic properties of PLA electrospun nanofibrous mats.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!