Tandem solar cells which are electrically connected with various photoactive materials have the potential to solve the current challenges by exceeding the theoretically limited efficiency of single junction solar cells. Here the first monolithic organic/silicon tandem cell is reported based on a semitransparent polymer on a crystalline silicon (c-Si) substrate. Herein, experimental results are presented for four-terminal (4-T) and monolithic two-terminal (2-T) organic/c-Si tandem cells using organic cells with an inverted n-i-p structure and c-Si cells with an n-type TOPCon structure with detailed analysis. The best 4-T tandem cell efficiency is 15.22%, and 2-T results show that the top (organic) and bottom (c-Si) cells are electrically connected by an open-circuit voltage over 1.4 V. Further, a simulated efficiency of over 20% using the organic/c-Si tandem is achieved, implying the tandem efficiency can be enhanced through further improvement of electric and optical characteristics with the optimization.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1002/marc.202100305 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Source Material Design for Realizing >50% Indium-Saving Transparent Electrode toward Sustainable Development of Silicon Heterojunction Solar Cells.
ACS Appl Mater Interfaces
January 2025
School of Materials, Shenzhen Campus of Sun Yat-sen University, No. 66, Gongchang Road, Guangming District, Shenzhen, Guangdong 518107, P.R. China.
Indium (In) reduction is a hot topic in transparent conductive oxide (TCO) research. So far, most strategies have been focused on reducing the layer thickness of In-based TCO films and exploring TCOs. However, no promising industrial solution has been obtained yet.
View Article and Find Full Text PDFHighly Efficient Monolithic Perovskite/TOPCon Silicon Tandem Solar Cells Enabled by "Halide Locking".
Adv Mater
January 2025
Department of Chemistry, City University of Hong Kong, Kowloon, 999077, Hong Kong.
Perovskite/silicon tandem solar cells (TSCs) are promising candidates for commercialization due to their outstanding power conversion efficiencies (PCEs). However, controlling the crystallization process and alleviating the phases/composition inhomogeneity represent a considerable challenge for perovskite layers grown on rough silicon substrates, ultimately limiting the efficiency and stability of TSC. Here, this study reports a "halide locking" strategy that simultaneously modulates the nucleation and crystal growth process of wide bandgap perovskites by introducing a multifunctional ammonium salt, thioacetylacetamide hydrochloride (TAACl), to bind with all types of cations and anions in the mixed halide perovskite precursor.
View Article and Find Full Text PDFPerformance and stability analysis of all-perovskite tandem photovoltaics in light-driven electrochemical water splitting.
Nat Commun
January 2025
Molecular Materials and Nanosystems, Institute of Complex Molecular Systems, Eindhoven University of Technology, partner of Solliance, P.O. Box 513, 5600 MB, Eindhoven, The Netherlands.
All-perovskite tandem photovoltaics are a potentially cost-effective technology to power chemical fuel production, such as green hydrogen. However, their application is limited by deficits in open-circuit voltage and, more challengingly, poor operational stability of the photovoltaic cell. Here we report a laboratory-scale solar-assisted water-splitting system using an electrochemical flow cell and an all-perovskite tandem solar cell.
View Article and Find Full Text PDFSelf-assembled hole-selective contact for efficient Sn-Pb perovskite solar cells and all-perovskite tandems.
Nat Commun
January 2025
College of Materials Science and Engineering & Engineering Research Center of Alternative Energy Materials & Devices, Ministry of Education, Sichuan University, Chengdu, China.
Self-assembled monolayers (SAMs) have displayed unpredictable potential in efficient perovskite solar cells (PSCs). Yet most of SAMs are largely suitable for pure Pb-based devices, precisely developing promising hole-selective contacts (HSCs) for Sn-based PSCs and exploring the underlying general mechanism are fundamentally desired. Here, based on the prototypical donor-acceptor SAM MPA-BT-BA (BT), oligoether side chains with different length (i.
View Article and Find Full Text PDFOvercoming optical losses in thin metal-based recombination layers for efficient n-i-p perovskite-organic tandem solar cells.
Nat Commun
January 2025
Institute of Materials for Electronics and Energy Technology (i-MEET), Department of Materials Science and Engineering, Friedrich-Alexander-Universität Erlangen-Nürnberg, Erlangen, Germany.
Perovskite-organic tandem solar cells (P-O-TSCs) hold substantial potential to surpass the theoretical efficiency limits of single-junction solar cells. However, their performance is hampered by non-ideal interconnection layers (ICLs). Especially in n-i-p configurations, the incorporation of metal nanoparticles negatively introduces serious parasitic absorption, which alleviates photon utilization in organic rear cell and decisively constrains the maximum photocurrent matching with front cell.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!