The design of a high-efficiency mass spectrometer is described, aimed at residual gas detection of low mass species using low-energy electron impact, with particular applications in helium atom microscopy and atomic or molecular scattering. The instrument consists of an extended ionization volume, where electrons emitted from a hot filament are confined using a solenoidal magnetic field to give a high ionization probability. Electron space charge is used to confine and extract the gas ions formed, which are then passed through a magnetic sector mass filter before reaching an ion counter. The design and implementation of each of the major components are described in turn, followed by the overall performance of the detector in terms of mass separation, detection efficiency, time response, and background count rates. The linearity of response with emission current and magnetic field is discussed. The detection efficiency for helium is very high, reaching as much as 0.5%, with a time constant of (198 ± 6) ms and a background signal equivalent to an incoming helium flux of (8.7 ± 0.2) × 10 s.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1063/5.0050292 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
High-Throughput Information Storage in an Intelligent Response Phosphor.
ACS Appl Mater Interfaces
January 2025
Department of Physics, Georgia Southern University, Statesboro, Georgia 30460, United States.
Persistent phosphor has emerged as a promising candidate for information storage due to rapid accessibility and low-energy requirements. However, the low storage capacity has limited its practical application. Herein, we skillfully designed and developed NaGdGeO:Pb,Tb stimulated phosphor by trace doped Sm.
View Article and Find Full Text PDFOctaethyl vs Tetrabenzo Functionalized Ru Porphyrins on Ag(111): Molecular Conformation, Self-Assembly and Electronic Structure.
J Phys Chem C Nanomater Interfaces
January 2025
Technical University of Munich, TUM School of Natural Sciences, Physics Department E20, Garching 85748, Germany.
Metalloporphyrins on interfaces offer a rich playground for functional materials and hence have been subjected to intense scrutiny over the past decades. As the same porphyrin macrocycle on the same surface may exhibit vastly different physicochemical properties depending on the metal center and its substituents, it is vital to have a thorough structural and chemical characterization of such systems. Here, we explore the distinctions arising from coverage and macrocycle substituents on the closely related ruthenium octaethyl porphyrin and ruthenium tetrabenzo porphyrin on Ag(111).
View Article and Find Full Text PDFIntervalence plasmons in boron-doped diamond.
Nat Commun
January 2025
Department of Nuclear, Plasma, and Radiological Engineering, The Grainger College of Engineering, University of Illinois Urbana-Champaign, Champaign, IL, USA.
Doped semiconductors can exhibit metallic-like properties ranging from superconductivity to tunable localized surface plasmon resonances. Diamond is a wide-bandgap semiconductor that is rendered electronically active by incorporating a hole dopant, boron. While the effects of boron doping on the electronic band structure of diamond are well-studied, any link between charge carriers and plasmons has never been shown.
View Article and Find Full Text PDFPick-and-Place Transfer of Arbitrary-Metal Electrodes for van der Waals Device Fabrication.
ACS Nano
January 2025
School of Physics and Astronomy, Monash University, Clayton, Victoria 3800, Australia.
Van der Waals electrode integration is a promising strategy to create nearly perfect interfaces between metals and 2D materials, with advantages such as eliminating Fermi-level pinning and reducing contact resistance. However, the lack of a simple, generalizable pick-and-place transfer technology has greatly hampered the wide use of this technique. We demonstrate the pick-and-place transfer of prefabricated electrodes from reusable polished hydrogenated diamond substrates without the use of any sacrificial layers due to the inherent low-energy and dangling-bond-free nature of the hydrogenated diamond surface.
View Article and Find Full Text PDFMultiexposure Grayscale Patterns with Low-Energy Electrons.
ACS Appl Mater Interfaces
January 2025
Zhejiang Key Laboratory of 3D Micro/Nano Fabrication and Characterization, School of Engineering, Westlake University, Hangzhou, Zhejiang 310030, China.
High-energy electron beam exposure is generally recognized as the standard for achieving high-precision nanofabrication. Low-energy electron beam exposure techniques offer advantages in 3D manufacturing; however, they have received limited attention in traditional processes due to precision limitations and insufficient exposure, leading to an underestimation of their potential. In this article, we introduce a nanofabrication strategy using low-energy electrons in ice-assisted electron-beam lithography (iEBL) alleviating the compatibility issue between resolution and quasi-3D manufacturing.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!