This article presents a life cycle assessment of bio-based polyethylene terephthalate (PET) bottles with a cradle to grave scope and provides a comparison with petrochemical PET bottles for 13 environmental impact categories. Besides the baseline bio-based PET bottles, which are produced from Brazilian sugarcane reflecting status-quo, two alternative hypothetical bio-based product systems were considered: European wheat straw and European crops market mix composed of maize, wheat and sugar beet. The land-use change (LUC) impacts were assessed based on a deterministic model. The end-of-life impact was assessed using the EASETECH model. Baseline bio-based PET bottles performed overall worse than conventional petrochemical PET bottles, offering only better performance (about 10%) in abiotic depletion (fossil fuels). Comparable performance is observed for climate change (2% difference without the LUC, and 7% with LUC impacts). Using European crops for ethanol production (alternative 1) instead of Brazilian sugarcane resulted in a worse environmental performance, due to lower yields attained compared to Brazilian sugarcane. When wheat straw was considered as biomass feedstock for ethanol production (alternative 2), similar environmental performance with petrochemical PET bottles was seen.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/j.scitotenv.2021.148642 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Effect of rPET Content and Preform Heating/Cooling Conditions in the Stretch Blow Molding Process on Microcavitation and Solid-State Post-Condensation of vPET-rPET Blend: Part II-Statistical Analysis and Interpretation of Tests.
Materials (Basel)
December 2024
Faculty of Physics and Astronomy, University of Wroclaw, 9 Maxa Born Square, 50-204 Wroclaw, Poland.
This research explores how varying proportions of virgin polyethylene terephthalate (vPET) and recycled polyethylene terephthalate (rPET) in vPET-rPET blends, combined with preform thermal conditions during the stretch blow molding (SBM) process, influence PET bottles' microscopic characteristics. Key metrics such as viscosity, density, crystallinity, amorphous phase relaxation, and microcavitation were assessed using response surface methodology (RSM). Statistical analysis, including Analysis of variance (ANOVA) and its power, supported the interpretation of results.
View Article and Find Full Text PDFEfficient Synthesis of ,-Muconic Acid by Catechol Oxidation of Ozone in the Presence of a Base.
Molecules
January 2025
Graduate School of Science, Technology and Innovation, Kobe University, 1-1, Rokkodai, Kobe 657-0013, Hyogo, Japan.
Muconic acid, a crucial precursor in synthesizing materials like PET bottles and nylon, is pivotal for the anticipated growth in the textiles and plastics industries. This study presents a novel chemical synthesis route for ,-muconic acid (ccMA) using catechol. Biochemical methods face scale-up challenges due to microorganism sensitivity and complex extraction processes, while chemical methods involve environmentally harmful substances and have low yields.
View Article and Find Full Text PDFThe Effect of Elastomer Content and Annealing on the Physical Properties of Upcycled Polyethylene Terephthalate-Maleated Styrene Ethylene Butylene Styrene Blends for Additive Manufacturing.
Materials (Basel)
December 2024
Polymer Extrusion Lab, The University of Texas at El Paso, El Paso, TX 79968, USA.
In the work presented here, we explore the upcycling of polyethylene terephthalate (PET) that was derived from water bottles. The material was granulated and extruded into a filament compatible with fused filament fabrication (FFF) additive manufacturing platforms. Three iterations of PET combined with a thermoplastic elastomer, styrene ethylene butylene styrene with a maleic anhydride graft (SEBS-g-MA), were made with 5, 10, and 20% by mass elastomer content.
View Article and Find Full Text PDFWaste PET bottle-derived carbon for defluorination of fluoride-polluted water.
Environ Technol
January 2025
Department of Materials Engineering, Kwame Nkrumah University of Science and Technology, Kumasi, Ghana.
This study synthesises expanded graphite (EG) from graphitised carbon from waste polyethylene terephthalate (PET) bottles. The adsorbent material was characterised using FTIR, XRF, XRD, SEM, Raman Spectroscopy, and BET surface area analysis. The synthesised EG defluorinated wastewater, utilising response surface methodology (RSM) for experimental design and optimisation.
View Article and Find Full Text PDFTraining Children for Prehospital Aquatic Interventions: Assessing Throwing Skills Using Traditional and Alternative Materials in a Simulated Water Rescue.
Prehosp Disaster Med
December 2024
CLINURSID Research Group, Psychiatry, Radiology, Public Health, Nursing and Medicine Department; University of Santiago de Compostela, A Coruña, Spain.
Background: Drowning remains a significant cause of mortality among children world-wide, making prevention strategies crucial. The World Health Organization (WHO) recommends training children in safe rescue techniques, including the use of basic skills such as throwing floating objects. This study aims to address a knowledge gap regarding the throwing capabilities of children aged six to twelve using conventional and alternative water rescue materials.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!