Fabrication of highly permeable and anti-fouling performance of Poly(ether ether sulfone) nanofiltration membranes modified with zinc oxide nanoparticles.

Membrane fouling is one of the challenging bottleneck problems in waste water treatment by membrane process. The present study constructed a nanofiltration membrane based on the zinc oxide nanoparticle (n-ZnO) integrated Poly(ether ether sulfone) (PEES) membranes. The developed membranes were characterized by X-ray diffraction (XRD), attenuated total reflectance - fourier transform infrared spectroscopy (AT-FTIR), atomic force microscopy (AFM) and scanning electron microscope (SEM) coupled with energy dispersive X-ray (EDX) analysis. Pure water flux, contact angle, molecular weight cut-off, mean pore size and porosity were determined to investigate the influence of n-ZnO on the properties of the membranes. The characterization showed asymmetric configuration of membranes after n-ZnO incorporation. This incorporation also enhanced the hydrophilicity of PEES membrane. The fouling-resistant potential of the membranes was investigated by the model foulant humic acid (HA) and an enhanced anti-fouling irreversible property with a corresponding flux recovery rate of 92.43 % was noted for the prepared membrane. The rejection performance and permeability of HA was 98.03 % and 166.73 L m h, respectively, owing to the hydrophilic nature of ZnO particles. Further, modified PEES membrane exhibited superior separation performance for monovalent and divalent anions. PEES/n-ZnO hybrid membrane assisted nanofiltration is an effective process for the improvement of membrane performance and anti-fouling property, demonstrating its immense use in water reclamation.