A series of Tb- and Eu-doped CaZnLu(PO) (CZLP:Tb and CZLP:Eu) as well as CaZnTb(PO):Eu (CZTP:Eu) phosphors have been prepared via the traditional high-temperature solid-state reaction. X-ray powder diffraction (XRD) patterns of the as-prepared phosphors indicate that the introduction of Tb or Eu affects neither the phase impurity nor the crystal structure of the CZLP host lattice. The concentration dependent photoluminescence (PL) spectra reveal that even if Lu was fully substituted by the dopants, Tb or Eu, the phenomenon of concentration quenching would not occur. Color tunable emissions from green to red can be realized by adjusting the type of doping ion (Tb and Eu) and their relative concentration. Furthermore, the energy transfer from Tb to Eu was confirmed and the mechanism was determined to be the dipole-quadrupole interaction. In addition, the quantum efficiencies were found to be 0.61, 0.58 and 0.85 for CZTP, CZTP:0.2Eu and CaZnEu(PO) (CZEP), respectively. As a result, a white light emitting diode (WLED) device was fabricated using the optimal CZTP:0.2Eu yellow phosphor, the BaMgAlO:Eu (BAM:Eu) blue phosphor and a 370 nm near-ultraviolet (n-UV) chip. The obtained device displays a suitable color rendering index (CRI, ∼81.3) and correlated color temperature (CCT, ∼2634 K) value, indicating its potential application in n-UV LEDs.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1039/d1dt01901e | DOI Listing |
The interaction between ultrafast, tightly focused lasers and materials has garnered significant interest owing to its distinctive properties. In this study, we present a versatile methodology for the fabrication of tunable plasmonic nanostructures by employing a disordered gold nanoisland-dielectric-metal configuration, achieved through femtosecond laser printing. By reshaping the gold nanoislands and reconfiguring them into nanograting-like structures, the orientation of these nanostructures is influenced by the polarization of the femtosecond laser light, leading to controllable plasmon resonance and polarization-sensitive color display.
View Article and Find Full Text PDFSpectrochim Acta A Mol Biomol Spectrosc
January 2025
Department of Physics, Indian Institute of Engineering Science and Technology, Shibpur, Howrah 711103, West Bengal, India.
Dy/Tb co-doped glasses have drawn profound attention for their potential in solid state lighting due to their unique luminescence properties. This research highlights the effect of compositional variation on structural and optical characteristics of Dy/Tb co-doped phospho-tellurite glasses through a comprehensive analysis involving X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR) and photoluminescence (PL) studies. XRD and FTIR spectroscopy are conducted to characterize the glass matrix and confirm its structural integrity.
View Article and Find Full Text PDFNanoscale
January 2025
Electronic Materials Research Laboratory, Key Laboratory of the Ministry of Education International Center for Dielectric Research & Shaanxi Engineering Research Center of Advanced Energy Materials and Devices, Xi'an Jiaotong University, 710049 Xi'an, China.
Long lifetime multicolor phosphorescence materials possess excellent optical properties and have important application prospects in the fields of advanced anti-counterfeiting and information encryption. However, realizing long lifetime and color-tunable room temperature phosphorescent (RTP) carbon dot (CD) materials has proved challenging. In this study, the organic precursor molecules 2-phenethylamine (2-Ph), 9-aminophenanthrene (9-Ph) and 1-aminopyrene (1-Py) with different degrees of conjugation were selected to synthesize RTP CD composites: 2-Ph@BA, 9-Ph@BA and 1-Py@BA were synthesized by mixing with a boric acid (BA) matrix under high temperature pyrolysis.
View Article and Find Full Text PDFAdv Mater
January 2025
Orthopaedic Biomechanics, Department of Biomedical Engineering, Eindhoven University of Technology, P.O. Box 513, Eindhoven, 5600 MB, the Netherlands.
Current challenges in tissue engineering include creation of extracellular environments that support and interact with cells using biochemical, mechanical, and structural cues. Spatial control over these cues is currently limited due to a lack of suitable fabrication techniques. This study introduces Xolography, an emerging dual-color light-sheet volumetric printing technology, to achieve control over structural and mechanical features for hydrogel-based photoresins at micro- to macroscale while printing within minutes.
View Article and Find Full Text PDFChemistry
January 2025
Institute of Chemical Technology, Mumbai, Department of Dyestuff Technology, Nathelal parekh Marg, 400019, India, 400019, Matunga, 2010, INDIA.
Mechanochromic materials, known for their ability to change color in response to mechanical stimuli such as pressure, stretching, grinding, or rubbing, hold significant importance due to their diverse applications. In this study, we synthesized and characterized two novel pyridine-tethered imidazo[1,2-a]pyridine mechanoresponsive luminogens with appended tetraphenylethene, named GBY-10 and GBY-11. GBY-10 exhibited reversible mechanofluorochromism, while GBY-11 did not revert to its original color after solvent fuming.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!