When undergoing compression during oral processing, stacked gels display different mechanical properties that shape perceptions of texture contrasts (Santagiuliana et al., 2018). However, to date, characterizing the mechanical responses of individual gel layers has been impossible. In this study, an ultrasound (US) technique was developed, that allowed such deformation dynamics to be visualized in real time. Stacked gels were created using layers (height: 5 mm) of brittle agar and elastic gelatin in different combinations. In a series of experimental tests, different stacked gel combinations were placed on a rough, deformable artificial tongue model (ATM) made of polyvinyl alcohol; a texture analyzer was used to apply uniaxial force, and deformation was monitored by an US transducer (5 MHz) located under the ATM. From the obtained results, it was observed that the deformation of ATM surface during compression was in accordance with the force recorded by the texture analyzer, suggesting a collaborative response of different layers under compression. Moreover, US imaging revealed that differences in Young's modulus values between layers led to heterogeneous strain distributions, which were more pronounced for the agar layers. Biopolymer elasticity was also a key factor. Regardless of combination type, the gelatin layers never fractured; such was not the case for the agar layers, especially those with lower Young's modulus values. The results of this US study have thus paved the way for a better understanding of the mechanical deformation that occurs in heterogeneous foods, a phenomenon that has been difficult to examine because of the limitations of conventional techniques.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC8283154PMC
http://dx.doi.org/10.1016/j.crfs.2021.06.004DOI Listing

Publication Analysis

Top Keywords

stacked gels
8
texture analyzer
8
young's modulus
8
modulus values
8
agar layers
8
layers
7
deformation
5
texture
4
texture contrast
4
contrast ultrasonic
4

Similar Publications

Synergistic stabilization of oil-in-water emulsion gels by pea protein isolate and cellulose nanocrystals: Effects of pH and application to 3D printing.

Food Chem

December 2024

State Key Laboratory of Food Science and Resource, School of Food Science and Technology, Jiangnan University, 1800 Lihu Road, Wuxi 214122, Jiangsu, People's Republic of China. Electronic address:

In this study, pea protein isolate (PPI) and cellulose nanocrystals (CNC) were used to prepare oil-in-water emulsions, and the effects of pH and the oil content on the properties of the emulsions were investigated. The microstructural analysis revealed that PPI and CNC formed complexes by electrostatic attraction at pH 3.0 and 4.

View Article and Find Full Text PDF

Two novel BODIPY dyes, BOC3 and BC12, were synthesized with variable alkyl chains at terminal amide functional units. BC12, featuring a longer alkyl chain (-C12H25), formed a gel compared to BOC3, which has a shorter alkyl chain (-CH2OCH3), due to supra molecular self-assembly in film. Both dyes exhibited absorption peaks around 530 nm in the visible region, with a red shift of about 30 nm in the film state, essential for organic electronic applications.

View Article and Find Full Text PDF

Bioaerogels from biomass waste: An alternative sustainable approach for wastewater treatment.

Int J Biol Macromol

December 2024

Environmental Chemistry Division, Environmental Science Department, Faculty of Science, Port Said University, Port Said, Egypt; Egyptian Propylene and Polypropylene Company (EPPC), Port Said, Egypt. Electronic address:

The generation of municipal solid waste is projected to increase from 2.1 billion tonnes in 2023 to 3.8 billion tonnes by 2050.

View Article and Find Full Text PDF

Highly Stretchable Sensitive Multiscale Hydrogel Inspired by Biological Muscles for Wearing Sensors.

ACS Appl Mater Interfaces

October 2024

State Key Laboratory of Marine Food Processing & Safety Control, Dalian Polytechnic University, Dalian, Liaoning Province 116034, China.

Article Synopsis
  • Hydrogels are promising for wearable electronics due to their stretchiness and comfort, but many lack the required sensitivity and mechanical strength for high-performance sensors.
  • The proposed strategy involves creating a multiscale hydrogel using densely entangled elastic microspheres that enhance sensitivity and toughness, allowing it to respond quickly to applied pressure.
  • This innovative hydrogel not only maintains excellent mechanical properties and biocompatibility, but also resolves issues related to complicated synthesis and cost, making it suitable for a wide range of wearable and implantable electronic devices.
View Article and Find Full Text PDF

A highly stretchable and self-adhesive cellulose complex hydrogels based on PDA@Fe mediated redox reaction for strain sensor.

Int J Biol Macromol

November 2024

College of Chemical Engineering, Nanjing Forestry University, Nanjing 210037, China; Jiangsu Coinnovat Ctr Efficient Proc & Utilizat Fo, Nanjing Forestry University, Nanjing 210037, China. Electronic address:

As the application of conductive hydrogels in the field of wearable smart devices is gradually deepening, a variety of hydrogel sensors with high mechanical properties, strong adhesion, fast self-healing, and excellent conductivity are emerging. However, it is still a great challenge to manufacture hydrogel sensors combining multiple properties. Herein, we leveraged the dynamic redox reaction occurring between polydopamine (PDA) and Fe to induce ammonium persulfate (APS) to generate free radicals, thereby initiating the copolymerization of hydroxyethyl methacrylate (HEMA) and acrylic acid (AA) monomers.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!