Perfluoroalkyl substances (PFASs) in leachate, fly ash, and bottom ash from waste incineration plants: Implications for the environmental release of PFAS.

Sci Total Environ

Guangdong Key Laboratory of Environmental Pollution and Health, School of Environment, Jinan University, Guangzhou 510632, China.

Published: November 2021

Perfluoroalkyl substances (PFASs) are a family of chemicals widely distributed in daily use consumer products. Most of these products become municipal solid wastes (MSWs) after they have been used. In the present study, we examined different types of PFASs in leachate, fly ash and bottom ash produced from three MSW incineration plants in southern China. High PFAS levels were found in leachate (mean concentration 215 ng/mL, range 21.4-682 ng/mL) from the incineration plants, which indicated large amounts of PFASs in the wastes leached out. The average quantities of PFASs annually discharged from the leachates of the three plants were estimated to be approximately 384 kg (Plant A), 47.3 kg (Plant B), and 2.82 kg (Plant C). Relatively lower levels of PFASs in fly ash (mean 16.4 ng/g, range 1.46-87.6 ng/g) and bottom ash (mean 14.6 ng/g, range 3.11-77.4 ng/g) indicated that high-temperature incineration destroyed most of the PFASs. The wide array of PFASs concentrations in all three matrices illustrated that some PFASs-containing industrial wastes were still entered into local MSW. In general, short chain PFASs, including perfluorobutyric acid (PFBA) and perfluorobutane sulfonate (PFBS), were the primary PFASs in leachate samples. In addition, PFOS was the predominant PFASs in fly ash samples. The results showed that leachate, fly ash, and bottom ash from MSW incineration plants are important vectors of PFASs.

Download full-text PDF

Source
http://dx.doi.org/10.1016/j.scitotenv.2021.148468DOI Listing

Publication Analysis

Top Keywords

fly ash
20
bottom ash
16
incineration plants
16
pfass
12
pfass leachate
12
leachate fly
12
ash bottom
12
ash
9
perfluoroalkyl substances
8
substances pfass
8

Similar Publications

L-Aspartic Acid with Dual Functions: An Eco-Friendly and Affordable Choice to Accelerate High Salinity Brine Utilization.

Adv Sci (Weinh)

January 2025

State Key Laboratory of Clean Energy Utilization, Institute for Thermal Power Engineering, Zhejiang University, Hangzhou, 310058, China.

L-Aspartic acid (L-Asp) poses a dual function, which can affect the evaporation and crystallization process of the high-salinity brine by altering the physical or chemical properties of the salts. MSWI (municipal solid waste incineration) fly ash washing leachate, as a typical high-salinity brine, is utilized here to validate this hypothesis under the simulation guidance. Since L-Asp has stronger adsorption energy on the (110) crystal face of CaCO, L-Asp can facilitate the preferential growth of more valuable vaterite during the softening process (pretreatment before crystallization).

View Article and Find Full Text PDF

Household kitchen waste (HKW) is produced in large quantity and its management is difficult due to high moisture content and complex organic matter. Aerobic composting of HKW is an easy, efficient, cost-effective and eco-friendly method. This study is designed to achieve a zero-waste concept and to convert HKW.

View Article and Find Full Text PDF

The objective of this investigation is to overcome the difficulties in fabricating cost-effective, eco-friendly porous geopolymers (PGs) by integrating Coal fly ash (CFA) and spodumene flotation tailings (SFT). This synthesis utilizes a unique blend of CFA and SFT in a 6:4 mass ratio, with specific attention to optimizing the pore architecture to improve the PGs' efficacy. Key parameters included a modulus of 1.

View Article and Find Full Text PDF

Legacy contaminants tied to energy production are a worldwide concern. Coal combustion residues (CCRs) contain high concentrations of potentially toxic trace elements such as arsenic (As), mercury (Hg), and selenium (Se), which can persist for decades after initial contamination. CCR disposal methods, including aquatic settling basins and landfills, can facilitate environmental exposure through intentional and accidental releases.

View Article and Find Full Text PDF

Vanadium recovery from oil sands petcoke fly ash: A comprehensive techno-economic assessment.

Waste Manag

January 2025

Department of Mechanical Engineering, University of Alberta, 10-203 Donadeo Innovation Centre for Engineering, Edmonton, Alberta T6G 1H9, Canada. Electronic address:

Bitumen-derived petcoke contains significant quantities of vanadium, recoverable from the fly ash formed during combustion. Despite efforts to process vanadium recovery from petcoke, detailed cost information, critical for stakeholders and decision-makers, remains absent in the public domain. To address this gap, we developed data-intensive techno-economic models specifically for vanadium recovery from petcoke fly ash.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!