Carbon steel coupons were buried in a specific low-pH cement grout designed for radioactive waste disposal and left 6 months in anoxic conditions at 80 °C. The corrosion product layers were analyzed by µ-Raman spectroscopy, XRD, and SEM. They proved to be mainly composed of iron sulfides, with magnetite as a minor phase, mixed with components of the grout. Average corrosion rates were estimated by weight loss measurements between 3 and 6 µm yr. Corrosion profiles revealed local degradations with a depth up to 10 µm. It is assumed that the heterogeneity of the corrosion product layer, mainly composed of conductive compounds (FeS, FeS, and FeO), promotes the persistence of corrosion cells that may lead to locally aggravated degradations of the metal. New cement grouts, characterized by a slightly higher pH and a lower sulfide concentration, should then be designed for the considered application.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC8269698 | PMC |
| http://dx.doi.org/10.3390/ma14133563 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Zn adsorption in ferric-silicates microstructures in sulfidic tailings mediated through mineral weathering by Acidithiobacillus species.
Chemosphere
December 2024
College of Land Science and Technology, China Agricultural University, Beijing, 100193, PR China. Electronic address:
Heavy metals released from metallic sulfidic tailings pose significant environmental threats by contaminating surface and groundwater in mining areas. Sustainable rehabilitation methods are essential to remove or stabilize these metals, improving the quality of acid mine drainage and minimizing pollution. This study examines the adsorption capacity of zinc ions (Zn) by different iron-silicate mineral groups under natural weathering and bacteria-regulated weathered conditions.
View Article and Find Full Text PDFSolar-Driven Sulfide Oxidation Paired With CO Reduction Based on Vacancies Engineering of Copper Selenide.
Small
December 2024
Institute of Photoelectronic Thin Film Devices and Technology, Renewable Energy Conversion and Storage Center, State Key Laboratory of Photovoltaic Materials and Cells, Nankai University, Tianjin, 300350, P. R. China.
Photovoltaic-driven electrochemical (PV-EC) carbon dioxide reduction (COR) coupled with sulfide oxidation (SOR) can efficiently convert the solar energy into chemical energy, expanding its applications. However, developing low-cost electrocatalysts that exhibit high selectivity and efficiency for both COR and SOR remains a challenge. Herein, a bifunctional copper selenide catalyst is developed with copper vacancies (v-CuSe) for the COR-SOR.
View Article and Find Full Text PDFIron as a Sulfidation-Resistant Current Collector for Negative Electrode in Sulfide-Based All-Solid-Batteries.
Small
December 2024
LiB Materials Research Group, Research Institute of Industrial Technology and Science (RIST), POSCO Global R and D Center, Sondohwahak-ro 100, Yeonsu-gu, Incheon, 21985, Republic of Korea.
The demand for all-solid-state batteries (ASSBs) featuring credible LiPSCl argyrodite (LPSCl) electrolytes is increasing, driving interest in exploring suitable current collectors for ASSBs. Copper (Cu), used as a current collector in traditional lithium-ion batteries, exhibits significant instability in LPSCl-ASSBs. In this study, the effectiveness of iron (Fe) is systematically investigated as an alternative current collector in LPSCl-ASSBs and compare its performance to that of Cu.
View Article and Find Full Text PDFIron-Doped Cadmium Sulfide/Graphene Oxide (CdFeS/GO) Nanocomposites for Photocatalytic Degradation of Toxic Pollutants.
Luminescence
December 2024
Department of Polymer Sciences, University of Madras, Chennai, Tamil Nadu, India.
Heterogeneous photocatalysis has been widely explored as a promising solution for dye degradation due to its cost-effectiveness, ease of recovery, and use of green technology. Precisely, iron-doped cadmium sulfide (CdS) exhibits greater efficiency because of its higher charge separation, more electron transfer efficiency, and adsorption under visible region. In this study, two different ratios of iron-doped cadmium sulfide (CdFeS/GO) nanocomposites such as CdFeS/GO and CdFeS/GO were synthesized using the coprecipitation method and characterized with UV-Vis DRS, XRD, FT-IR, Raman, XPS, and HR-TEM.
View Article and Find Full Text PDFEvidences of the electrogenic sulfur oxidation in constructed wetlands.
Chemosphere
December 2024
College of Environment and Ecology, Chongqing University, Chongqing, PR China. Electronic address:
The sulfur redox cycling, mainly involving sulfide oxidation and sulfate reduction, remains a crucial factor that regulates the treatment performance of constructed wetlands (CWs). However, anoxic environments normally prevail in the CW systems, harboring vast reduced sulfur and sulfur minerals, where the occurrence and mechanism of anoxic sulfide oxidation remain unknown. In this study, CW microcosms filled with quartz sand (Qtz) and pyrite (Pyt) were established to investigate the anoxic sulfur oxidation under the bioelectrochemical manipulations.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!