In this research work, the nanostructured Fe-Mn (BM0), Fe-Mn-Cu (BM1), Fe-Mn-W (BM2), and Fe-Mn-Co (BM3) biodegradable alloys were successfully synthesized using mechanical alloying. The microstructure of the synthesized alloys was examined using XRD, SEM equipped with EDS, and HRTEM techniques. The results obtained based on these techniques confirmed the development of nanostructured BM0, BM1, BM2, and BM3 alloys and homogenous solid solutions with an even elemental dispersion. The compressibility of the synthesized alloys was investigated experimentally and empirically in the as-milled conditions and after applying a stress relief treatment (150 °C for 1 h). The load applied for compaction experiments ranged from 25-1100 MPa with a rate of 1 mm/min. According to the experimentation performed in the current study, the relative density of the as-milled BM0, BM1, BM2, and BM3 alloys was 72.90% and 71.64%, 72.32%, and 72.03%, respectively. After applying the stress relief treatment, the density was observed to increase to 75.23%, 77.10%, 72.65%, and 72.86% for BM0-S, BM1-S, BM2-S and BM3-S samples, respectively. A number of compaction models were tested to identify the optimum models for predicting the compressibility behavior of nanostructured Fe-Mn, Fe-Mn-Cu, Fe-Mn-W, and Fe-Mn-Co alloys in the as-milled and stress-relieved conditions.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC8200240 | PMC |
| http://dx.doi.org/10.3390/ma14113088 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Precise Synthesis of Complex Si-Si Molecular Frameworks.
J Am Chem Soc
January 2025
Department of Chemistry, Johns Hopkins University, 3400 N. Charles St., Baltimore, Maryland 21218, United States.
In this Perspective, we highlight the emergence of target-oriented syntheses of complex molecules composed of Si-Si (oligosilanes) rather than C-C bonds. Saturated oligosilanes structurally resemble alkanes with respect to a tetrahedral geometry, a preference for a staggered conformation in linear chains, the ability to form stable small rings, and tetrahedral stereochemistry at asymmetrically functionalized Si centers. There are also critical differences, for example, differences in multiple bonding and the ability to form penta- and hexacoordinated structures, that mean that chemical reactivity and, in particular, rules for stereoselective synthesis do not cleanly translate from carbon to silicon.
View Article and Find Full Text PDF2D/1D Hierarchical Hollow NiO@PPy Composites with Tunable Dielectric Properties for Enhanced Electromagnetic Wave Absorption.
Small
January 2025
College of Chemical Engineering, Fuzhou University, Fuzhou, Fujian, 350116, China.
The development of diverse microstructures has substantially contributed to recent progress in high-performance electromagnetic wave (EMW) absorption materials, providing a versatile platform for the modulation of absorption properties. Exploring multidimensional microstructures and developing tailored and gentle strategies for their precise optimization can substantially address the current challenges posed by relatively unclear underlying mechanisms. Here, a series of 2D/1D heterogeneous NiO@PPy composites featuring hollow hierarchical microstructures are successfully synthesized using a straightforward strategy combining sacrificial templating with chemical oxidative polymerization.
View Article and Find Full Text PDFLeveraging Ergonomics and Human Factors (E/HF) for community impact: what have we learned about how to make a difference.
Ergonomics
January 2025
Department of Systems and Information Engineering, University of Virginia, Charlottesville, VA, USA.
Ergonomics and Human Factors (E/HF) practitioners are increasingly engaged in projects meant to centre underserved communities and reduce inequities. The subdiscipline of E/HF that has emerged to explore the application of E/HF in this way is called community ergonomics. In this qualitative-descriptive study, we reflect on the progress made in the field of community ergonomics since its original conceptualisation in 1994.
View Article and Find Full Text PDFUltrasound-activated erythrocyte membrane-camouflaged Pt (II) layered double hydroxide enhances PD-1 inhibitor efficacy in triple-negative breast cancer through cGAS-STING pathway-mediated immunogenic cell death.
Theranostics
January 2025
Cancer Research Center, School of Medicine, Xiamen University, Xiamen, 361102, China.
Immunogenic cell death (ICD) offers a promising avenue for the treatment of triple-negative breast cancer (TNBC). However, optimizing immune responses remains a formidable challenge. This study presents the design of RBCm@Pt-CoNi layered double hydroxide (RmPLH), an innovative sonosensitizer for sonodynamic therapy (SDT), aimed at enhancing the efficacy of programmed cell death protein 1 (PD-1) inhibitors by inducing robust ICD responses.
View Article and Find Full Text PDFWool Fabric with an Improved Durable Biological Resistance Using a Coumarin Derivative.
ACS Appl Bio Mater
January 2025
Proteinic and Man-made Fibres Department, Textile Research and Technology Institute, National Research Centre, Cairo, Dokki, 12622, Egypt.
Wool is the most widely used proteinic natural fiber in the clothing industry by virtue of its versatile properties. Unfortunately, wool, as a natural fiber, is more susceptible to attack by microorganisms and moths, which may cause harm to the fiber and human health. That is why the antimicrobial and mothproof finishing of natural textiles is of prime importance to the textile and clothing industry.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!