Effects of extrusion with varying barrel temperature, moisture content, and screw speed on hempseed oil cake were studied for the first time. Extrusion at lower moisture (30%) and higher screw speed (300 rpm) significantly increased the proportion of free polyphenols, flavonoids, and phenylpropionamide content, and -glucosidase and acetylcholinesterase inhibition activities. Full factorial design confirmed the three-way interactions among all extrusion parameters for all chemical assays with the bound phenolic fraction, total flavonoid content, and DPPH inhibition activity of the free phenolic fraction. HPLC-DAD-ESI-QTOF-MS/MS analysis tentatively identified 26 phenylpropionamides, and the contents of N-trans-caffeoyltyramine (66.26 µg/g) and total phenylpropionamides (85.77 µg/g) were significantly increased after extrusion at the lower moisture and higher screw speed extrusion conditions. The higher -glucosidase inhibition activity at higher screw speed could be due to the N-trans-caffeoyltyramine (r = 0.99, p < 0.01), while the AChE inhibition activity appeared to be influenced more by the cannabisins A-C, M (r > 0.8, p < 0.01). PRACTICAL APPLICATION: Hempseed oil cake is a byproduct of oil extraction, with high protein and high fiber contents. The results of this research could be used directly in food industry to improve the nutritional and commercial value of hempseed oil cake by extrusion technology.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1111/1750-3841.15813 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Technical note: A silenced hybrid 3D-printed self-loading pistol of the YEET family.
Forensic Sci Int
January 2025
Ballistics laboratory, National Institute for Criminalistics and Criminology, Vilvoordsesteenweg 98, Brussels 1120, Belgium. Electronic address:
Since the release of the first 3D-printed firearm, "The Liberator," the occurrence of 3D-printed firearms in criminal activities has increased, highlighting the need for forensic research on these weapons. This study presents a technical examination of a 3D-printed firearm received by the National Institute of Criminalistics and Criminology (NICC), focusing on its design, ballistic performance, and its potential for microscopic comparative analysis. The firearm, resembling a 3D-printed pistol Yeet22, is primarily constructed from polymer parts, with the exception of the firing pin, barrel, and various springs and screws.
View Article and Find Full Text PDFComparison of mechanical properties and shaping performance of ProGlider and ProTaper ultimate slider.
BMC Oral Health
January 2025
Department of Conservative Dentistry, College of Dentistry, Kyung Hee University, 26-6, Kyungheedae-ro, Dongdaemun-gu, Seoul, 02453, Republic of Korea.
Background: This study aims to compare design, phase transformation behavior, and torsional resistance of the ProGlider (PG) and ProTaper ultimate slider (PUS) and to compare the performance of two files in the glide-path preparation of a double-curved artificial canal.
Methods: Scanning electron microscopy, micro-computed tomography, and differential scanning calorimetry were used to characterize the samples. A torsional resistance test was performed to obtain ultimate strength and distortion angle.
Investigation of the Thermal Stability and Hydrolytic Degradation Kinetics of Poly(Lactide-co-Glycolide) Melts.
AAPS PharmSciTech
January 2025
Molecular Pharmaceutics and Drug Delivery, College of Pharmacy, The University of Texas at Austin, Austin, Texas, USA.
Poly(lactide-co-glycolide) (PLGA) is widely used in a variety of long-acting injectables. However, its biodegradable nature creates potential chemical stability challenges during melt extrusion, where PLGA is exposed to elevated temperature (100-140 °C) for several minutes. This study evaluated the thermal stability of three PLGA grades (Resomer® 502, 502H, and 505) with varying molecular weights and chain-ends using a differential scanning calorimeter and twin-screw extruder.
View Article and Find Full Text PDFOptimizing extrusion processes and understanding conformational changes in itraconazole amorphous solid dispersions using in-line UV-Vis spectroscopy and QbD principles.
Int J Pharm X
December 2024
Leicester School of Pharmacy, De Montfort University, Leicester LE1 9BH, UK.
This paper presents a comprehensive investigation of the manufacturing of itraconazole (ITZ) amorphous solid dispersions (ASDs) with Kolllidon® VA64 (KVA64) using hot-melt extrusion (HME) and in-line process monitoring, employing a Quality by Design (QbD) approach. A sequential Design of Experiments (DoE) strategy was utilized to optimize the manufacturing process, with in-line UV-Vis spectroscopy providing real-time monitoring. The first DoE used a fractional factorial screening design to evaluate critical process parameters (CPPs), revealing that ITZ concentration had the most significant impact on the product quality attributes.
View Article and Find Full Text PDFPercutaneous calcaneal sliding osteotomy with the rising sun technique.
Arch Orthop Trauma Surg
December 2024
Fuss und Sprunggelenkchirurgie, Klinik für Orthopädische Chirurgie und Traumatologie des Bewegungsapparates, Kantonsspital St.Gallen, Rorschacher Strasse 95, CH-9007, St.Gallen, Switzerland.
Background: Calcaneal slide osteotomies represent a well-established component in the surgical treatment of joint-preserving hind foot corrections. The percutaneous technique aims to minimize the surgical morbidity and maximize surgical efficiency. There is a consensus that percutaneous calcaneal sliding osteotomy (PCSO), using a low-speed and hightorque burr, is generally performed in four steps corresponding to the four quadrants of the cross-section of the calcaneal tuber.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!