Stepwise Fabrication of Co-Embedded Porous Multichannel Carbon Nanofibers for High-Efficiency Oxygen Reduction.

Nanomicro Lett

Jiangsu Key Laboratory of Materials and Technology for Energy Conversion, College of Materials Science and Technology, Nanjing University of Aeronautics and Astronautics, Nanjing, 210016, People's Republic of China.

Published: April 2019

A novel nonprecious metal material consisting of Co-embedded porous interconnected multichannel carbon nanofibers (Co/IMCCNFs) was rationally designed for oxygen reduction reaction (ORR) electrocatalysis. In the synthesis, ZnCoO was employed to form interconnected mesoporous channels and provide highly active CoO/Co core-shell nanoparticle-based sites for the ORR. The IMC structure with a large synergistic effect of the N and Co active sites provided fast ORR electrocatalysis kinetics. The Co/IMCCNFs exhibited a high half-wave potential of 0.82 V (vs. reversible hydrogen electrode) and excellent stability with a current retention up to 88% after 12,000 cycles in a current-time test, which is only 55% for 30 wt% Pt/C.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC7770944PMC
http://dx.doi.org/10.1007/s40820-019-0264-2DOI Listing

Publication Analysis

Top Keywords

co-embedded porous
8
multichannel carbon
8
carbon nanofibers
8
oxygen reduction
8
orr electrocatalysis
8
stepwise fabrication
4
fabrication co-embedded
4
porous multichannel
4
nanofibers high-efficiency
4
high-efficiency oxygen
4

Similar Publications

Fe-N sites coupled with FeC on porous carbon from plastic wastes for oxygen reduction reaction.

Chem Commun (Camb)

September 2024

Key Laboratory of Green Chemistry and Technology, Ministry of Education, National Engineering Laboratory of Eco-Friendly Polymeric Materials (Sichuan), College of Chemistry, Sichuan University, Chengdu 610065, China.

Isolated Fe-N sites coupled with FeC nanoparticles co-embedded in N-doped porous carbon were fabricated using polyethylene terephthalate wastes as carbon sources. Benefiting from the synergistic effect between Fe-N sites and FeC, and the hierarchical porous structure, the catalyst exhibits outstanding ORR performance, realizing the concept of turning trash into treasure.

View Article and Find Full Text PDF

Transition-metal species embedded in carbon have sparked intense interest in the fields of oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). However, improvement of the electrocatalytic kinetics remains a challenge caused by the synergistic assembly. Here, we propose a biochemical strategy to fabricate the Co nanoparticles (NPs) and Co/Ni-N-C co-embedded N-doped porous carbon (CoNPs&Co/Ni-N-C@NC) catalysts via constructing the zeolitic imidazolate framework (ZIF)@yeast precursor.

View Article and Find Full Text PDF

Diatomite supported highly-dispersed ZnO/Zn-co-embedded ZIF-8 derived porous carbon composites for adsorption desulfurization.

J Hazard Mater

June 2024

School of Chemistry and Chemical Engineering, Yangzhou University, Yangzhou 225002, China. Electronic address:

The metal organic framework (MOFs)-derived porous carbon materials with highly dispersed metal active sites were of the exclusive application foreground in many field, such as catalyst, electrochemistry, adsorption desulfurization and so on. However, the loss issue of metal active sites in MOFs frame was indispensable during the high temperature carbonization because of the lower boiling point of many metals, thus fundamentally affecting the atom-scale uniform distribution merit of MOFs-derived porous carbon materials. This work was to provide a novel strategy to address the loss issue of the active metal volatilization in the fabrication of MOFs-derived porous carbon materials.

View Article and Find Full Text PDF

An efficient protocol for photocatalytic degradation of organic dyes and antibiotics has been successfully established via MOF-derived (MOF = metal-organic framework) Ni, Co-embedded N-doped bimetallic porous carbon nanocomposites (NiCo/NC). Such a NiCo/NC nanocomposite features well-distributed structures, suitable specific surface areas, and more active sites determined by various characterization analyses. The catalyst exhibits higher photocatalytic performance and stability toward the liquid-phase degradation of methylene blue (MB) under visible light irradiation for 60 min, after the adsorption-desorption equilibrium and the thorough degradation into HO and CO.

View Article and Find Full Text PDF

Noble metal electrocatalysts prepared by microbial methods have attracted extensive attention because of their environmental protection and easy preparation. However, the preparation of electrocatalysts by microbial methods has problems such as large nanoparticles size and low loading rate. In this study, the porous gel co-embedded with and alginate is prepared as the adsorption matrix to further enhance its mass transfer and adsorption efficiency.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!