On the clustering of bulk nanobubbles and their colloidal stability.

J Colloid Interface Sci

School of Chemical Engineering, University of Birmingham, Edgbaston, Birmingham B15 2TT, United Kingdom. Electronic address:

Published: November 2021

Bulk nanobubbles which are usually observed in pure water have a mean diameter typically around 100 nm. We use a combination of physical and chemical techniques to prove the hypothesis that the nanoentities observed in pure water are stable clusters of much smaller stable nanobubbles. The stability of bulk nanobubble clusters is affected by factors such as ionic strength or internal energy of the system. We show that bulk nanobubbles on the order of 100 nm exist in a stable cluster form in neutral or basic media, and dissociate into tiny primary nanobubbles on the order of 1 nm in acidic media, or in the presence of small amounts of salt. These new findings suggest that bulk nanobubbles which have a high surface energy unsurprisingly tend to behave in a similar manner to solid nanoparticles in terms of their agglomeration tendency, which is confirmed by the DLVO theory. The results will have important implications for our understanding and interpretation of the behaviour of bulk nanobubbles, in particular their interfacial and colloidal stability.

Download full-text PDF

Source
http://dx.doi.org/10.1016/j.jcis.2021.05.154DOI Listing

Publication Analysis

Top Keywords

bulk nanobubbles
20
colloidal stability
8
stability bulk
8
observed pure
8
pure water
8
nanobubbles order
8
nanobubbles
7
bulk
5
clustering bulk
4
nanobubbles colloidal
4

Similar Publications

Study of CO-hydrate formation in contact with bulk nanobubbles: An investigation from experiment and molecular-dynamics simulations.

J Colloid Interface Sci

January 2025

School of Chemical & Bioprocess Engineering, University College Dublin, Belfield, Dublin 4, Ireland. Electronic address:

Hypothesis: Nanobubbles (NBs) have been extensively investigated as a sustainable promoter for gas hydrate nucleation, which also contribute to the hydrate memory effect. However, less attention afforded to their effects on the hydrate-growth process, thus lacking a complete perspective of the overall effects from NBs on hydrate formation. We hypothesize that their effect on CO hydrate growth may vary depending on the properties of NBs.

View Article and Find Full Text PDF

High performance ozone nanobubbles based advanced oxidation processes (AOPs) for degradation of organic pollutants under high pollutant loading.

J Environ Manage

February 2025

Department of Sanitary Engineering, Faculty of Civil and Environmental Engineering, Gdansk University of Technology, Narutowicza 11/12 Str., 80-233, Gdansk, Poland; School of Civil, Environmental, and Architectural Engineering, College of Engineering, Korea University, 145 Anam-ro, Seongbuk-gu, Seoul, 02841, Republic of Korea. Electronic address:

Advanced Oxidation Processes (AOPs) have proven to be an effective solution for chemical wastewater treatment, particularly for degradation of organic pollutants, especially dyes. Ozonation is recognized as one of the most prevalent AOPs. Nevertheless, some cases show a lowered efficiency of O utilization which is attributed to its inadequate distribution in the treated water causing low residence time, low mass transfer coefficient as well as shorter half-life.

View Article and Find Full Text PDF

Thermodynamic properties of pinned nanobubbles.

J Chem Phys

November 2024

State Key Laboratory of Organic-Inorganic Composites, Beijing University of Chemical Technology, Beijing 100029, China.

We present molecular dynamics simulations to study the thermodynamics of nanobubbles trapped at the mouth of narrow slit pores. Except when the slit dimensions are comparable to typical molecular sizes, the predictions of macroscopic thermodynamic theory are recovered by our simulations. Our simulations confirm that in this case, the internal pressure of stable nanobubbles is independent of the bubble radius and the surface tension and only depends on the bulk properties of the solute-containing solution, i.

View Article and Find Full Text PDF

Impact of Bulk Nanobubble Water on a TiO Solid Surface: A Case Study for Medical Implants.

Langmuir

December 2024

New Industry Creation Hatchery Center, Tohoku University, 6-6-10 Aoba, Aramaki, Aoba-ku, Sendai, Miyagi 980-8579, Japan.

Article Synopsis
  • Enhancing the wettability of medical implants is essential for better biocompatibility, and this study explores the use of ozone nanobubble water to improve titanium dental implants' surfaces.
  • Immersion in ozone nanobubble water for about 10 minutes changes implants from hydrophobic to superhydrophilic, maintaining this property for over a month, indicating effective surface alteration and cleaning.
  • The formation of nanoshells from ozone microbubbles contributes to the long-lasting hydrophilicity of the implants, suggesting that this method could be a promising approach for improving the compatibility of dental implants.
View Article and Find Full Text PDF

Interfacial Thermal Fluctuations Stabilize Bulk Nanobubbles.

Phys Rev Lett

September 2024

Department of Engineering Mechanics, School of Ocean and Civil Engineering, Shanghai Jiao Tong University, Shanghai 200240, China.

Consensus on bulk nanobubble stability remains elusive, despite accepted indirect evidence for longevity. We develop a nanobubble evolution model by incorporating thermal capillary wave theory that reveals that dense nanobubbles generated by acoustic cavitation tend to shrink and intensify interfacial thermal fluctuations; this significantly reduces surface tension to neutralize enhanced Laplace pressure, and secures their stabilization at a finite size. A stability criterion emerges: thermal fluctuation intensity scales superlinearly with curvature: sqrt[⟨h^{2}⟩]∝(1/R)^{n}, n>1.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!