The wetting of surfaces is strongly influenced by adsorbate layers. Therefore, in this work, sessile drops and their interaction with adsorbate layers on surfaces were investigated by molecular dynamics simulations. Binary fluid model mixtures were considered. The two components of the fluid mixture have the same pure component parameters, but one component has a stronger and the other a weaker affinity to the surface. Furthermore, the unlike interactions between both components were varied. All interactions were described by the Lennard-Jones truncated and shifted potential with a cutoff radius of 2.5σ. The simulations were carried out at constant temperature for mixtures of different compositions. The parameters were varied systematically and chosen such that cases with partial wetting as well as cases with total wetting were obtained and the relation between the varied molecular parameters and the phenomenological behavior was elucidated. Data on the contact angle as well as on the mole fraction and thickness of the adsorbate layer were obtained, accompanied by information on liquid and gaseous bulk phases and the corresponding phase equilibrium. Also, the influence of the adsorbate layer on the wetting was studied: for a sufficiently thick adsorbate layer, the wall's influence on the wetting vanishes, which is then only determined by the adsorbate layer.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC8280723 | PMC |
http://dx.doi.org/10.1021/acs.langmuir.1c00780 | DOI Listing |
Chemosphere
January 2025
Departamento de Química, Universidade Federal do Paraná, 81531-980, Curitiba-PR, Brasil.
Soil is regarded as a natural repository for strongly adsorbed pollutants since glyphosate (GLY) is preferentially adsorbed by the inorganic fraction of the soil, which may greatly limits its leaching. In this way, understanding how clay mineralogy influences the sorption and transport processes of glyphosate in soils with different mineralogical characteristics is highly relevant. In this work, two clay mineralogy contrasting soils were used to evaluate GLY retention: a Oxisol (OX) with high levels of iron oxides (amorphous and crystalline) and a Inceptisol (IN) with a predominance of kaolinite.
View Article and Find Full Text PDFAnal Chem
January 2025
Nanobiotechnology Department of the Institute of Biotechnology, Brandenburg University of Technology Cottbus-Senftenberg, Universitaetsplatz 1, Senftenberg 01968, Brandenburg, Germany.
Single nanoparticle (NP) cyclic voltarefractometry (CVR), realized as wide-field surface plasmon resonance microscopy (SPRM) in combination with potential cycling, has been proposed and applied to the in situ study of TiO NPs. Electrochemical activity of TiO is mainly observed outside the electrochemical stability window of water. Therefore, the response of individual anatase (a-TiO) and rutile (r-TiO) NPs adsorbed on a gold layer was studied in 0.
View Article and Find Full Text PDFRSC Adv
January 2025
Hainan Provincial Key Laboratory of Natural Rubber Processing, Agricultural Products Processing Research Institute, Chinese Academy of Tropical Agricultural Sciences Zhanjiang 524001 P. R. China
Addressing the environmental challenges posed by oil spills and industrial wastewater is critical for sustainable development. Graphene aerogels demonstrate significant potential as highly efficient adsorbents due to their high specific surface area, excellent structural tunability and outstanding chemical stability. Among available fabrication methods, the hydrothermal self-assembly technique stands out for its low cost, high tunability and good scalability.
View Article and Find Full Text PDFHeliyon
January 2025
Department of Civil and Environmental Engineering, Iran University of Science and Technology (IUST), Narmak, Tehran, Iran.
Luffa is a robust, renewable biomaterial known for its low mass, high specific strength, and non-toxicity, making it ideal for composite development. This study modified luffa to create the LF@ppy@LDH nanocomposite, combining luffa, polypyrrole, and layered double hydroxides to efficiently remove ibuprofen from water. Techniques like FE-SEM, EDX, FTIR, and XRD confirmed the modification.
View Article and Find Full Text PDFInt J Biol Macromol
January 2025
Liaoning Key Lab of Lignocellulose Chemistry and BioMaterials, Liaoning Collaborative Innovation Center for Lignocellulosic Biorefinery, College of Light Industry and Chemical Engineering, Dalian Polytechnic University, Dalian 116034, China. Electronic address:
Lignin-based porous carbon, a derivative of lignin, is acknowledged for its cost-effectiveness, stability, and environmental sustainability. It exhibits significant adsorption capacity for the removal of heavy metals and in wastewater treatment, rendering it a highly esteemed adsorbent material. However, the potential of lignin-derived porous carbon for the capture of iodine in environmental contexts has yet to be thoroughly investigated.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!