AI Article Synopsis
Article Abstract
The development of poly(3,4-ethylenedioxythiophene) (PEDOT) with high specific capacitance is the key to pursuing high-performance supercapacitors, and the electrochemical properties of PEDOT are closely related to the oxidation degree and conjugated chain length of its molecular chain. In this work, the influences of various oxidants (FeCl, Fe(Tos) and MoCl) on the molecular chain structure and capacitive properties of PEDOT via vapor phase polymerization were systematically investigated. Fe(Tos) can significantly improve the degree of oxidation and the length of the conjugated chain of PEDOT compared to FeCl and MoCl, enhancing the conductivity and providing more active sites for Faraday reaction. Therefore, the PEDOT/P(Fe(Tos)) electrode displays a considerable conductivity of 73 S cm, high areal capacitance (419 mF cm) and excellent electrochemical stability under the different bent state. Moreover, the conjugated structure strengthens the interaction between PEDOT chains, achieving good cycle stability. Therefore, Fe(Tos) is an ideal oxidant for obtaining high-performance PEDOT electrode materials.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/j.jcis.2021.05.122 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
PEDOT/Polypyrrole Core-Sheath Fibers for Use as Conducting Polymer Artificial Muscles.
ACS Appl Mater Interfaces
January 2025
Sensor and Actuator Systems, Department of Physics, Chemistry and Biology (IFM), Linköping University, Linköping SE-581 83, Sweden.
Electropolymerized polypyrrole (PPy) is considered as one of the promising polymers for use in ionic-electroactive or conducting polymer (CP) actuators. Its electromechanical properties surpass those of other prominent CPs such as poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT/PSS) or polyaniline. However, freestanding and linear contracting actuator fibers made solely of electropolymerized PPy are not available yet.
View Article and Find Full Text PDFBioinspired bicontinuous adhesive hydrogel for wearable strain sensor with high sensitivity and a wide working range.
J Colloid Interface Sci
January 2025
Key Laboratory for Soft Chemistry and Functional Materials of Ministry of Education, Nanjing University of Science and Technology, Nanjing 210094 China. Electronic address:
Conductive hydrogel strain sensors demonstrate extensive potential in artificial robotics, human-computer interaction, and health monitoring, owing to their excellent flexibility and biocompatibility. Wearable strain sensors for real-time monitoring of human activities require hydrogels with self-adhesion, desirable sensitivity, and wide working range. However, balancing the high sensitivity and a wide working range remains a challenge.
View Article and Find Full Text PDFComputational Study of Chalcogenide-Based Perovskite Solar Cell Using SCAPS-1D Numerical Simulator.
Materials (Basel)
January 2025
Fort Hare Institute of Technology, University of Fort Hare, Private Bag X1314, Alice 5700, Eastern Cape, South Africa.
Perovskite solar cells (PSCs) are regarded as extremely efficient and have significant potential for upcoming photovoltaic technologies due to their excellent optoelectronic properties. However, a few obstacles, which include the instability and high costs of production of lead-based PSCs, hinder their commercialization. In this study, the performance of a solar cell with a configuration of FTO/CdS/BaZrS/HTL/Ir was optimized by varying the thickness of the perovskite layer, the hole transport layer, the temperature, the electron transport layer (ETL)'s defect density, the absorber defect density, the energy band, and the work function for back contact.
View Article and Find Full Text PDFOrganic Optocoupler with Simple Construction as an Effective Linear Current Transceiver.
Materials (Basel)
January 2025
ABB Corporate Technology Center, 13A Starowislna Str., 31-038 Krakow, Poland.
In this study, it is shown that an efficient organic optocoupler (OPC) can be fabricated using commercially available and solution-processable organic semiconductors. The transmitter is a single-active-layer organic light-emitting diode (OLED) made from a well-known polyparavinylene derivative, Super Yellow. The receiver is an organic light-emitting diode (OLSD) with a single active layer consisting of a mixture of the polymer donor PTB7-Th and the low-molecular-weight acceptor ITIC; the receiver operates without an applied reverse voltage.
View Article and Find Full Text PDFDevelopment of Composite Semiconductor Films Based on Organotin Complexes Doped with Cobalt Porphine for Applications in Organic Diodes.
Materials (Basel)
December 2024
Chemistry Institute, Universidad Nacional Autónoma de México, Circuito Exterior S/N, Ciudad Universitaria, Ciudad de México 04510, Mexico.
In this work, we present the green synthesis of complex - derived from β-hidroxymethylidene indanones by ultrasound, which allowed for the obtaining of compounds in a shorter time and with good yields. These organotin complexes were then doped with cobalt porphine and incorporated into a poly(3,4-ethylenedioxythiophene):poly(4-styrenesulfonate) matrix to manufacture composite semiconductor films. The semiconductor films were characterized through atomic force microscopy, examining their topography, Knoop hardness (around 17 HK), and tensile strength, which varied from 5 × 10 to 7 × 10 Pa.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!