The preparation of polystyrene/thermoplastic starch (PS/TPS) blends was divided into three stages. The first stage involved the preparation of TPS from sago starch. Then, for the second stage, PS was blended with TPS to produce a TPS/PS blend. The ratios of the TPS/PS blend were 20:80, 40:60, 60:40, and 80:20. The final stage was a modification of the composition of TPS/PS blends with succinic anhydride and ascorbic acid treatment. Both untreated and treated blends were characterized by their physical, thermal, and surface morphology properties. The obtained results indicate that modified blends have better tensile strength as the adhesion between TPS and PS was improved. This can be observed from SEM micrographs, as modified blends with succinic anhydride and ascorbic acid had smaller TPS dispersion in PS/TPS blends. The micrograph showed that there was no agglomeration and void formation in the TPS/PS blending process. Furthermore, modified blends show better thermal stability, as proved by thermogravimetric analysis. Water uptake into the TPS/PS blends also decreased after the modifications, and the structural analysis showed the formation of a new peak after the modification process.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC8198856 | PMC |
| http://dx.doi.org/10.3390/ma14112867 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Practical algebraic calculus and Nullstellensatz with the checkers Pacheck and Pastèque and Nuss-Checker.
Form Methods Syst Des
April 2022
Institute for Algebra, Johannes Kepler University, Linz, Austria.
Unlabelled: Automated reasoning techniques based on computer algebra have seen renewed interest in recent years and are for example heavily used in formal verification of arithmetic circuits. However, the verification process might contain errors. Generating and checking proof certificates is important to increase the trust in automated reasoning tools.
View Article and Find Full Text PDFInjectable and 3D-Printable Semi-Interpenetrating Polymer Networks Based on Modified Sodium Alginate for Cell Spheroid Formation.
Biomacromolecules
December 2024
Department of Chemical Engineering, University of Patras, Patras 26504, Greece.
We report on 3D-printable polymer networks based on the combination of modified alginate-based polymer blends; two alginate polymers were prepared, namely, a thermoresponsive polymer grafted with P(NIPAM--NtBAM)-NH copolymer chains and a second polymer modified with diol/pH-sensitive 3-aminophenylboronic acid. The gelation properties were determined by the hydrophobic association of the thermosensitive chains and the formation of boronate esters. At a mixing ratio of 70/30 wt % of the thermo/diol-responsive polymers, the semi-interpenetrating network exhibited an optimum storage modulus ranging from ca.
View Article and Find Full Text PDFEvaluation of rheological properties of guar gum-based fracturing fluids enhanced with hydroxyl group bearing thermodynamic hydrate inhibitors.
Int J Biol Macromol
December 2024
Department of Petroleum Engineering, School of Energy Technology, Pandit Deendayal Energy University, Gandhinagar, Gujarat 382426, India. Electronic address:
Naturally occurring gas clathrates are a significant methane resource-the primary component of natural gas, regarded as the cleanest hydrocarbon and a key feedstock for producing gray and blue hydrogen. Despite the global abundance of gas hydrate reserves, extraction via depressurization has yet to achieve commercially viable production rates. The primary limitation lies in the low permeability of hydrate-bearing sediments, where solid clathrates obstruct porous pathways, hindering dissociation and slowing gas recovery.
View Article and Find Full Text PDFPreparation of quaternary ammonium lignosulfonate modified UV resistant polyurethane and its application in leather dyeing.
Int J Biol Macromol
December 2024
Fujian Key Laboratory of Leather Green Design and Manufacture, Jinjiang 362271, Fujian, China.
Applying cationic waterborne polyurethane (CWPU) in the leather color-fixing process can improve the dyeing rate and enhance color fastness. However, under prolonged exposure to sunlight, CWPU will age and degrade and the leather will fade in color, become stiff and crack easily. In this study, an Ultraviolet absorber was introduced into cationic waterborne polyurethane (UVCWPU) and quaternary ammonium Lignosulfonate (QLS) was prepared by quaternization.
View Article and Find Full Text PDFEnhanced flame retardancy and accelerated degradation of polylactic acid using a chitosan-based additive with phosphorus and zinc.
Int J Biol Macromol
December 2024
State Key Laboratory of Organic-Inorganic Composites, Beijing University of Chemical Technology, Beijing 100029, China. Electronic address:
Polylactic acid (PLA) is a bio-recyclable plastic, but its high flammability limits broader applications. Here, a novel flame retardant (Zn-CHP) is synthesized from chitosan (CH), diethylenetriaminepenta (methylenephosphonic) acid (DTPMP), and ZnCl₂ using a simple, solvent-free process. The Zn-CHP additive is melt-blended with PLA, achieving excellent flame retardancy at just 2 wt% loading.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!