Silica Fouling in Reverse Osmosis Systems- Small-Angle Neutron Scattering Studies.

Membranes (Basel)

JCNS-1/IBI-8: Neutron Scattering and Soft Matter, Forschungszentrum Jülich GmbH, D-52425 Jülich, Germany.

Published: May 2021

We present operando small-angle neutron scattering (SANS) experiments on silica fouling at two reverse osmose (RO) membranes under almost realistic conditions of practiced RO desalination technique. To its realization, two cells were designed for pressure fields and tangential feed cross-flows up to 50 bar and 36 L/h, one cell equipped with the membrane and the other one as an empty cell to measure the feed solution in parallel far from the membrane. We studied several aqueous silica dispersions combining the parameters of colloidal radius, volume fraction, and ionic strength. A relevant result is the observation of Bragg diffraction as part of the SANS scattering pattern, representing a crystalline cake layer of simple cubic lattice structure. Other relevant parameters are silica colloidal size and volume fraction far from and above the membrane, as well as the lattice parameter of the silica cake layer, its volume fraction, thickness, and porosity in comparison with the corresponding permeate flux. The experiments show that the formation of cake layer depends to a large extent on colloidal size, ionic strength and cross-flow. Cake layer formation proved to be a reversible process, which could be dissolved at larger cross-flow. Only in one case we observed an irreversible cake layer formation showing the characteristics of an unstable phase transition. We likewise observed enhanced silica concentration and/or cake formation above the membrane, giving indication of a first order liquid-solid phase transformation.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC8230220PMC
http://dx.doi.org/10.3390/membranes11060413DOI Listing

Publication Analysis

Top Keywords

cake layer
20
volume fraction
12
silica fouling
8
fouling reverse
8
small-angle neutron
8
neutron scattering
8
ionic strength
8
colloidal size
8
layer formation
8
silica
6

Similar Publications

Stacked meshes with super-wettability atmospheric plasma for efficient emulsion separation.

Nanoscale

January 2025

CAS Key Laboratory of Bio-inspired Materials and Interface Sciences, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing 100190, China.

Common filter membranes for emulsion separation often require time-intensive preparation and extensive use of chemicals, necessitating a fast-processing and eco-friendly alternative. This study introduces a 2-layer stacked nylon mesh treated with surface diffuse atmospheric plasma (SDAP) for rapid and efficient emulsion separation. Commercial nylon mesh exhibited durable super-wetting properties after just 30 s of SDAP treatment, which was sufficient for effective emulsion separation.

View Article and Find Full Text PDF

This study evaluated the integration of electrocoagulation into a lab-scale membrane bioreactor (EC-MBR) for treating wastewater from a detergent manufacturing plant. The EC-MBR system achieved a higher chemical oxygen demand (COD) and anionic surfactant removal efficiencies of 95.1% and 99.

View Article and Find Full Text PDF

Background: From June 13-16, 2022, a regional epidemiological department in Kazakhstan reported an increase in acute gastroenteritis cases among people who consumed food from a wedding at a restaurant. An investigation was initiated to determine factors associated with acute intestinal infection and prevent further illness.

Methods: The investigation team conducted a retrospective cohort study among people who consumed event food.

View Article and Find Full Text PDF

The gravity-driven membrane (GDM) system is an energy-efficient and environmentally sustainable water purification process; however, after prolonged operation, its membrane flux remains relatively low, making it necessary to adopt effective strategies for improving system performance. In this study, the effects of hydrostatic pressure (60, 100, 200 mbar) and pre-coating with aluminum-based flocs (ABF) on GDM flux and organic matter removal were investigated, and the regulatory mechanisms of the bio-cake layer were explored through interactions between morphological structure, composition and microbes. The results showed that the stable flux of the GDM-ABF system at a hydrostatic pressure of 60 mbar was almost equal to that at 100 mbar, and it outperformed higher hydrostatic pressure in organic matter removal, resulting in a more porous bio-cake layer structure.

View Article and Find Full Text PDF

Mechanisms and Enhancement of Hydrogen Evolution for Membrane Anti-fouling and Methane Upgrading by Sacrificed Anode in a Novel Electro-AnMBR.

Water Res

November 2024

State Key Laboratory of Environmental Aquatic Chemistry, Research Center for Eco-Environmental Sciences, Chinese Academy of Sciences, Beijing 100085, China; University of Chinese Academy of Sciences, Beijing 100049, China.

Article Synopsis
  • Severe membrane fouling and low methane content in biogas reduce the effectiveness of anaerobic membrane bioreactors (AnMBR) for energy recovery.
  • A new AnMBR design combines the electrochemical hydrogen evolution reaction (eHAnMBR) with a titanium membrane-cathode to enhance biogas quality and control membrane fouling using a sacrificed iron anode.
  • This innovative approach leads to a 28% increase in biogas purity and a 46% boost in methane production, while also reducing membrane pressure and improving overall wastewater treatment efficiency.
View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!