Analysis of Raised Feature Failures on 3D Printed Injection Moulds.

Background: Polymer-based 3D Printed Injection Mould (3DIM) inserts are used as a cost-effective method for low volume injection moulding (50-500 parts). However, abrupt failure leading to a short tool life is a common shortcoming of 3DIM. Need: The underlying causes of raised feature failures on 3DIM are not well known. Failure is commonly attributed to bending or shearing of raised features on the tool. Understanding the causes may help in delaying the failure and increasing tool life.

Approach: Tool failure was analysed from a first-principles perspective, using pressure and temperature fields as determined by mould flow simulation. Experimental results were also obtained for two types of tool material (Visijet M3-X and Digital ABS) with polycarbonate (Lexan 943A) as the part material.

Findings: Results find against the idea that pin failure in 3DIM tools is caused by bending and shear failures induced by injection pressures. We also conclude that failure of raised features is not necessarily an abrupt failure as mentioned in the literature. Originality: The generally accepted explanation for the failure of raised features in 3DIM tooling is that injection pressures cause bending and shear failure. This paper disconfirms this notion on theoretical and experimental grounds.