Wearable triboelectric nanogenerators (TENGs) have recently attracted great interest because they can convert human biomechanical energy into sustainable electricity. However, there is a need for improvement regarding the output performance and the complex fabrication of TENG devices. Here, a triboelectric nanogenerator in single-electrode mode is fabricated by a simple strategy, which involves a sandwich structure of silicone rubber and silver-coated glass microspheres (S-TENG). The S-TENG exhibits a remarkable performance in harvesting human motion energy and as flexible tactile sensor. By optimizing the device parameters and operating conditions, the maximum open-circuit voltage and short-circuit current of the S-TENG can reach up to 370 V and 9.5 μA, respectively. The S-TENG with good stretchability (300%) can be produced in different shapes and placed on various parts of the body to harvest mechanical energy for charging capacitors and powering LED lights or scientific calculators. In addition, the good robustness of the S-TENG satisfies the needs of reliability for flexible tactile sensors in realizing human-machine interfaces. This work expands the potential application of S-TENGs from wearable electronics and smart sensing systems to real-time robotics control and virtual reality/augmented reality interactions.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC8111432PMC
http://dx.doi.org/10.3762/bjnano.12.32DOI Listing

Publication Analysis

Top Keywords

triboelectric nanogenerator
8
silver-coated glass
8
glass microspheres
8
human motion
8
motion energy
8
flexible tactile
8
s-teng
5
stretchable triboelectric
4
nanogenerator silver-coated
4
microspheres human
4

Similar Publications

Robust and ultra-thin nanocellulose/MXene composite film and its performance in efficient electricity-generation and sensing.

Int J Biol Macromol

December 2024

Department of Plastic and Cosmetic Surgery, Treatment Center of Burn and Trauma, Affiliated Hospital of Jiangnan University, Wuxi 214122, China. Electronic address:

The conversion of mechanical energy into electrical energy by triboelectric nanogenerators (TENG) has attracted attention in recent years, particularly in the field of wearable sensor. In this work, TEMPO-oxidized cellulose nanofibers (TOCNF) with carboxylate groups were compounded with MXene to serve as both the negative friction layer and the electrode in assembling a TENG with nylon. The synergistic effect between TOCNF and MXene was analyzed to disclose its influence on the performance of the as-prepared TENG.

View Article and Find Full Text PDF

Triboelectric nanogenerators (TENGs) have garnered significant attention due to their high energy conversion efficiency and extensive application potential in energy harvesting and self-powered devices. Recent advancements in electrospun nanofibers, attributed to their outstanding mechanical properties and tailored surface characteristics, have meant that they can be used as a critical material for enhancing TENGs performance. This review provides a comprehensive overview of the developments in electrospun nanofiber-based TENGs.

View Article and Find Full Text PDF

With the increasing demand for food safety monitoring, the development of efficient, convenient, and green gas sensors has become a current research hotspot. Triboelectric nanogenerator (TENG) as a triethylamine sensor is a cutting-edge strategy for detection without the need for an additional power source. In this study, synthesized WO/MXene materials were prepared and bilayer thin films of carbon quantum dots (CPDs)-WO/MXene TENG.

View Article and Find Full Text PDF

Growth of the metal-organic framework ZIF-67 on cellulosic substrates for triboelectric nanogenerators.

Nanoscale

December 2024

Nanomaterials and Systems Laboratory, Major of Mechatronics Engineering, Faculty of Applied Energy Systems, Jeju National University, Jeju-si, Republic of Korea.

Metal-organic frameworks (MOFs) are porous crystalline materials with a metal ion coordinated to a ligand molecule. Recently, MOFs are being explored extensively for energy harvesting triboelectrification. However, the majority of MOFs are brittle and hard to grow, thus leading to poor device stability and flexibility.

View Article and Find Full Text PDF

Eco-friendly cellulose paper based triboelectric material regulated by lignocellulose composition.

Int J Biol Macromol

December 2024

College of Environmental and Biological Engineering, Putian University, No. 1133 Middle Xueyuan Street, Chengxiang District, Putian City, Fujian Province 351100, People's Republic of China; Fujian Provincial Key Laboratory of Ecology-Toxicological Effects & Control for Emerging Contaminants, Putian University, No. 1133 Middle Xueyuan Street, Chengxiang District, Putian City, Fujian Province 351100, People's Republic of China; Key Laboratory of Ecological Environment and Information Atlas, Putian University, No. 1133 Middle Xueyuan Street, Chengxiang District, Putian City, Fujian Province 351100, People's Republic of China.

Applying cellulose paper on the triboelectric material is the trend of developing eco-friendly triboelectric nanogenerator (TENG). However, the researchers always pay attention to improve the triboelectric property of cellulose paper by the grafting of functional groups and the introduction of conductive or high dielectric property materials, while neglecting the effects of lignocellulose fiber composition including hemicellulose and lignin. In this work, the contents of hemicellulose and lignin were adjusted by sodium hydroxide and sodium chlorite, respectively; and the effects of hemicellulose and lignin on the triboelectric performance of cellulose paper were evaluated.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!