Retinyl palmitate (RP) was added in monoolein (MO) cubic phase including decanoyl poly(ethyleneimine) (DePEI) and decanoyl gelatin (DeGel) in its water channel. RP, DePEI, and DeGel was incorporated In the cubic phase without structural disintegration, as confirmed by transmission electron microscopy. Differential scanning calorimetric and polarized optical microscopic analysis showed that adding the additives reduces phase transition temperature of cubic phase by 2 °C to 3 °C. The time-dependent chemical stability of RP added in the cubic phase was analyzed for 4 weeks at 5 °C, 20 °C, 30 °C, and 40 °C, using RP loaded in o/w emulsion as a control. The chemical stability of RP added in cubic phase containing DePEI and DeGel was somewhat higher as compared to the RP added in the cubic phase without DeGel/DePEI, possibly because DeGel/DePEI complex might shield RP from its environment by blocking the water channels inside the cubic phase. Moreover, the chemical stability of RP added in the cubic phase was comparatively higher than RP added in o/w emulsion.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1166/jnn.2021.19459 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Stretchable Blue Phase Liquid Crystal Lasers with Optical Stability Based on Small-Strain Nonlinear 3D Asymmetric Deformation.
Adv Mater
January 2025
CAS Key Laboratory of Bio-inspired Materials and Interfacial Science, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing, 100190, China.
Blue phase liquid crystal (BPLC) lasers exhibit exceptional optical quality and tunability to external stimuli, holding significant promise for innovative developments in the field of flexible optoelectronics. However, there remain challenges for BPLC elastomer (BPLCE) lasers in maintaining good optical stability during stretching and varying temperature conditions. In this work, a stretchable laser is developed based on a well-designed BPLCE with a combination of partially and fully crosslinked networks, which can output a single-peak laser under small deformation (44.
View Article and Find Full Text PDFFrom Powders to Performance-A Comprehensive Study of Two Advanced Cutting Tool Materials Sintered with Pressure Assisted Methods.
Materials (Basel)
January 2025
Faculty of Materials Science and Ceramics, AGH University of Krakow, 30-059 Krakow, Poland.
This paper presents a comprehensive study of two tool materials designed for the machining of Inconel 718 superalloy, produced through two distinct sintering techniques: High Pressure-High Temperature (HPHT) sintering and Spark Plasma Sintering (SPS). The first composite (marked as BNT), composed of 65 vol% cubic boron nitride (cBN), was sintered from the cBN-TiN-TiSiC system using the HPHT technique at a pressure of 7.7 GPa.
View Article and Find Full Text PDFGrowth of Oxide and Nitride Layers on Titanium Foil and Their Electrochemical Properties.
Materials (Basel)
January 2025
Department of Chemistry, Yeungnam University, 280 Daehak-ro, Gyeongsan 38541, Republic of Korea.
The surface of titanium foil can be modified by heating in the air, in a N flow, and in an NH flow. Upon heating in the air, the elemental Ti gradually transforms to TiO at 550 °C and to rutile TiO at above 700 °C. Treatment in a N flow leads similarly to TiO at 600 °C and TiO at 700 °C, although the overall reaction is slower.
View Article and Find Full Text PDFThe Microstructures, Mechanical Properties, and Energetic Characteristics of a Novel Dual-Phase TiZrWMo High-Entropy Alloy.
Materials (Basel)
January 2025
Research Institute for Special Steel Research, Central Iron and Steel Research Institute Company Limited, Beijing 100081, China.
High-energy structural materials (ESMs) integrate a high energy density with rapid energy release, offering promising applications in advanced technologies. In this study, a novel dual-phase TiZrWMo high-entropy alloy (HEA) was synthesized and evaluated as a potential ESM. The alloy exhibited a body-centered cubic (BCC) matrix with Mo-W-rich BCC precipitates of varying sizes, which increased proportionally with the W content.
View Article and Find Full Text PDFPreparation and Physical Properties of Quaternary MnFeSiAl Alloy Powders with Heusler and β-Mn Structures.
Materials (Basel)
January 2025
Institute of Materials Engineering, University of Silesia in Katowice, 75 Pułku Piechoty 1A, 41-500 Chorzów, Poland.
Manganese-based alloys with the composition MnFeZ (Z = Si, Al) have been extensively investigated in recent years due to their potential applications in spintronics. The MnFeSi alloy, prepared in the form of ingots, powders, or ribbons, exhibits either a cubic full-Heusler (2) structure, an inverse-Heusler (XA) structure, or a combination of both. In contrast, the MnFeAl alloy has so far been synthesized only in the form of ingots, featuring a primitive cubic (β-Mn type) structure.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!