Purpose: To compare the effect of different designs of guiding sleeves on heat generation during implant surgery while using different cooling fluid temperatures.
Material And Methods: Temperature measurements were performed during guided implant site preparation in bovine rib samples using two K- type thermocouples at 2 mm and 8 mm depths. Three groups were tested according to guiding sleeve design: conventional cylindrical sleeve, open C-shaped sleeve, and modified cylindrical sleeve. Each group was irrigated with three fluid temperatures: 10°C, 15°C, and 20°C. The groups were compared using Kruskal Wallis test followed by post hoc comparisons with Bonferroni correction. The level of statistical significance was set at p = 0.05.
Results: Surgical guides with conventional cylindrical sleeve design showed significantly higher heat generation during implant site preparation than guides with both the open C-shaped and the modified cylindrical sleeve designs at both 2mm and 8mm depths. The difference between C-shaped and modified cylindrical sleeves was not significant in any group. Using pre-cooled irrigation fluids (10°C and 15°C) reduced the generated heat; however, the differences within the same group were not statistically significant.
Conclusions: The use of a surgical guide with the conventional cylindrical sleeves led to higher heat generation than other sleeve designs, which might reach or near the critical threshold of bone thermal necrosis. Using surgical guides with open sleeves or modified cylindrical sleeves could be helpful in irrigation fluid delivery and decreasing the generated heat.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1111/jopr.13370 | DOI Listing |
Sci Rep
January 2025
Department of Mechanical Engineering, College of Engineering and Computer Sciences, Jazan University, P.O Box 45124, Jazan, Saudi Arabia.
Fluid flow across a Riga Plate is a specialized phenomenon studied in boundary layer flow and magnetohydrodynamic (MHD) applications. The Riga Plate is a magnetized surface used to manipulate boundary layer characteristics and control fluid flow properties. Understanding the behavior of fluid flow over a Riga Plate is critical in many applications, including aerodynamics, industrial, and heat transfer operations.
View Article and Find Full Text PDFCommun Eng
January 2025
Guangdong Provincial Key Laboratory of Optical Information Materials and Technology & Institute of Electronic Paper Displays, South China Academy of Advanced Optoelectronics, South China Normal University, Guangzhou, 510006, PR China.
Conventional electronic chip packaging generates a huge thermal resistance due to the low thermal conductivity of the packaging materials that separate chip dies and coolant. Here we propose and fabricate a closed high-conducting heat chip package based on passive phase change, using silicon carbide which is physically and structurally compatible with chip die materials. Our "chip on vapor chamber" (CoVC) concept realizes rapid diffusion of hot spots, and eliminates the high energy consumption of refrigeration ordinarily required for heat management.
View Article and Find Full Text PDFInt J Biol Macromol
January 2025
SKL of Marine Food Processing & Safety Control, National Engineering Research Center of Seafood, Collaborative Innovation Center of Seafood Deep Processing, Liaoning Province Key Laboratory for Marine Food Science and Technology, School of Food Science and Technology, Dalian Polytechnic University, Dalian 116034, People's Republic of China. Electronic address:
Corn starch inclusion complexes of alkyl gallates (typical phenololipid representatives), including stearyl gallate, dodecyl gallate, octyl gallate, and hexadecyl gallate, were synthesized by using a heat treatment method. Such inclusion complexes exhibited significantly improved two-step release properties for gallic acid. In other words, gallic acid was generated via the breakdown of alkyl gallates that were released from inclusion complexes in an everted rat intestinal sac model, as determined by HPLC-UV analysis.
View Article and Find Full Text PDFACS Nano
January 2025
State Key Laboratory of Materials Processing and Die & Mould Technology, and School of Materials Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074, Hubei, P. R. China.
Intensifying the severity of electromagnetic (EM) pollution in the environment represents a significant threat to human health and results in considerable energy wastage. Here, we provide a strategy for electricity generation from heat generated by electromagnetic wave radiation captured from the surrounding environment that can reduce the level of electromagnetic pollution while alleviating the energy crisis. We prepared a porous, elastomeric, and lightweight BiTe/carbon aerogel (CN@BiTe) by a simple strategy of induced in situ growth of BiTe nanosheets with three-dimensional (3D) carbon structure, realizing the coupling of electromagnetic wave absorption (EMA) and thermoelectric (TE) properties.
View Article and Find Full Text PDFJ Med Chem
January 2025
The Center for Basic Research and Innovation of Medicine and Pharmacy (MOE), School of Pharmacy, Second Military Medical University (Naval Medical University), 325 Guohe Road, Shanghai 200433, China.
Invasive candidiasis has attracted global attention with a high incidence and mortality. Current antifungal drugs are limited by unfavorable therapeutic efficacy, significant hepatorenal toxicity, and the development of drug resistance. Herein, we designed the first generation of lanosterol 14α-demethylase (CYP51)/heat shock protein 90 (Hsp90) dual inhibitors on the basis of antifungal synergism.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!