Biaxial flexural strength of various CAD-CAM glass-ceramic materials.

Purpose: To evaluate and compare the flexural strength of three CAD-CAM glass-ceramic materials and to investigate the effect of various surface treatments on their flexural strength.

Methods: 120 rectangular specimens were fabricated from three different types of CAD-CAM ceramic blocks and were divided into three groups: zirconia-reinforced lithium silicate (Celtra Duo, Group 1), leucite-reinforced glass-ceramic (IPS Empress CAD, Group 2), and lithium disilicate ceramic (IPS e.max CAD, Group 3). Dimensions of the specimens were standardized to 14.5x12.5 mm and 1.5 mm thickness. Specimens in each group were randomized into four subgroups. The first subgroup (NS) did not undergo any surface treatment; the second subgroup (P) underwent polishing only; the third subgroup (G) underwent glazing only; and the fourth subgroup (PG) underwent both polishing and glazing surface treatments. Biaxial flexural strength (FS) testing was performed until fracture occurred; FS was calculated in MPa. All analyses were performed using SPSS version 24.

Results: Group NS2 showed the lowest FS (89.34 ± 25.30 MPa). Group PG3 showed a significantly higher FS (365.38 ± 52.52 MPa) than Group P3 (268.15 ± 48.34). There was a statistically significant difference among the material groups for each surface treatment: IPS e.max CAD showed the highest FS, which was significantly greater than that of both Celtra Duo and IPS Empress CAD. The combination of polishing and glazing surface treatment resulted in significantly higher flexural strength than polishing alone for all three materials tested. For each material, no significant difference was found between the following surface treatments: control and polishing-only surface treatments; glazing-alone and the combination of polishing and glazing surface treatments. For each surface treatment, Celtra Duo showed significantly lower flexural strength than IPS e.max CAD. However, it displayed higher flexural strength than IPS Empress CAD, although the difference was only significant for glazing and the combination of polishing and glazing.

Clinical Significance: This study provides the clinician with an estimate of the flexural strength of glass-ceramic materials and shows how various surface treatments affect their strength.