Preliminary In Vitro Study of Fluoride Release from Selected Ormocer Materials.

The purpose of the in vitro study presented in this paper was to determine the long-term release of fluoride ions from selected ormocer materials (Admira (A), Admira Flow (AF), Admira Seal (AS)). The release of fluoride ions from these materials into a saline solution (0.9% NaCl) and deionized water was tested for 14 weeks. In a long-term study the measurements were taken after 1 and 3 h, then 1, 2, and 3 days and then at weekly intervals for 14 weeks. In a short-term study the measurements were made after 3, 24, 48, 72, 69, 168 h, i.e., within 7 days. All materials used in the test showed a constant level of fluoride release. The highest level of cumulative release of fluoride ions into deionized water was found in the AS material (23.95 ± 4.30 μg/mm), slightly lower in the A material (23.26 ± 4.16 μg/mm) and the lowest in the AF material (16.79 ± 2.26 μg/mm). The highest level of cumulative release into saline solution was found in AF (8.08 ± 1.30 μg/mm), slightly lower in AS (7.36 ± 0.30 μg/mm) and the lowest in A (6.73 ± 1.10 μg /mm). After 1 h of immersion of the samples in the saline solution, the highest level of fluoride was released by AF (0.57 ± 0.06 μg/mm) followed by A (0.20 ± 0.03 μg/mm) and AS (0.19 ± 0.02 µg/mm). Moreover, in the 14-week study, the total amount of fluoride release into the saline, which imitates the environment of the oral cavity, was observed as the highest in the AF sample.