A sensor-based system using inertial magnetic measurement units and surface electromyography is suitable for objectively and automatically monitoring the lumbar load during physically demanding work. The validity and usability of this system in the uncontrolled real-life working environment of physically active workers are still unknown. The objective of this study was to test the discriminant validity of an artificial neural network-based method for load assessment during actual work. Nine physically active workers performed work-related tasks while wearing the sensor system. The main measure representing lumbar load was the net moment around the L5/S1 intervertebral body, estimated using a method that was based on artificial neural network and perceived workload. The mean differences (MDs) were tested using a paired -test. During heavy tasks, the net moment (MD = 64.3 ± 13.5%, = 0.028) and the perceived workload (MD = 5.1 ± 2.1, < 0.001) observed were significantly higher than during the light tasks. The lumbar load had significantly higher variances during the dynamic tasks (MD = 33.5 ± 36.8%, = 0.026) and the perceived workload was significantly higher (MD = 2.2 ± 1.5, = 0.002) than during static tasks. It was concluded that the validity of this sensor-based system was supported because the differences in the lumbar load were consistent with the perceived intensity levels and character of the work tasks.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC8038224 | PMC |
| http://dx.doi.org/10.3390/s21072476 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Electromyography-Informed Estimates of Joint Contact Forces Within the Lower Back and Knee Joints During a Diverse Set of Industry-Relevant Manual Lifting Tasks.
J Appl Biomech
January 2025
Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA, USA.
Repetitive manual labor tasks involving twisting, bending, and lifting commonly lead to lower back and knee injuries in the workplace. To identify tasks with high injury risk, we recruited N = 9 participants to perform industry-relevant, 2-handed lifts with a 11-kg weight. These included symmetrical/asymmetrical, ascending/descending lifts that varied in start-to-end heights (knee-to-waist and waist-to-shoulder).
View Article and Find Full Text PDFCombining Postural Sway Parameters and Machine Learning to Assess Biomechanical Risk Associated with Load-Lifting Activities.
Diagnostics (Basel)
January 2025
Department of Advanced Medical and Surgical Sciences, University of Campania Luigi Vanvitelli, 80138 Naples, Italy.
: Long-term work-related musculoskeletal disorders are predominantly influenced by factors such as the duration, intensity, and repetitive nature of load lifting. Although traditional ergonomic assessment tools can be effective, they are often challenging and complex to apply due to the absence of a streamlined, standardized framework. Recently, integrating wearable sensors with artificial intelligence has emerged as a promising approach to effectively monitor and mitigate biomechanical risks.
View Article and Find Full Text PDFEvaluation of bone mineral density and its influencing factors in patients infected with HIV under antiretroviral therapy.
BMC Infect Dis
January 2025
Department of Infectious Diseases, School of Medicine, Iranian Research Center for HIV/AIDS, Iranian Institute for Reduction of High Risk Behaviors, Imam Khomeini Hospital Complex, Tehran University of Medical Sciences, Tehran, Iran.
Background: Reduced Bone Mineral Density (BMD) has been linked to Human Immunodeficiency Virus (HIV) infection and treatment. There is a lack of information regarding the osteoporosis status of middle-aged patients with HIV in Iran, despite the fact that Antiretroviral Therapy (ART) is widely accessible.
Objective: The purpose of this cross-sectional study was to assess the BMD status and low BMD risk factors in patients with HIV under ART living in Iran.
Objective: To investigate the biodynamics of human-exoskeleton interactions during patient handling tasks using a subject-specific modeling approach.
Background: Exoskeleton technology holds promise for mitigating musculoskeletal disorders caused by manual handling and most alarmingly by patient handling jobs. A deeper, more unified understanding of the biomechanical effects of exoskeleton use calls for advanced subject-specific models of complex, dynamic human-exoskeleton interactions.
Disc degeneration influences the strain magnitude and stress distribution within the adjacent trabecular bone.
Front Bioeng Biotechnol
December 2024
Department of Bioengineering, Imperial College London, London, United Kingdom.
Article Synopsis
- Up to 20% of people may experience osteoporotic vertebral fractures, and current bone mineral density (BMD) measurements present challenges in predicting these fractures.
- The study examined how intervertebral disc (IVD) degeneration affects stress and strain distribution in adjacent vertebrae by using human cadaveric lumbar specimens and advanced imaging techniques.
- Results indicated that trabecular bone near degenerated IVDs experienced significantly higher strains and altered stress distributions compared to non-degenerated IVDs, suggesting that incorporating IVD metrics could enhance fracture risk assessments.
Want AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!