Agaric-like anodes of porous carbon decorated with MoO nanoparticles for stable ultralong cycling lifespan and high-rate lithium/sodium storage.

J Colloid Interface Sci

School of Environmental and Material Engineering, Yantai University, No. 30 Qingquan Road, Yantai, Shandong 264005, China. Electronic address:

Published: August 2021

AI Article Synopsis

  • Researchers developed a new type of anode using porous carbon and MoO nanoparticles, inspired by nature, to enhance lithium and sodium ion storage.
  • The design helps manage volume changes during battery use, improving capacity and stability, showcased by impressive performance over thousands of charge cycles.
  • This innovative approach could lead to better battery technologies, making MoO-based materials promising for commercial use in next-gen batteries.

Article Abstract

The agaric-like anodes of porous carbon decorated with MoO nanoparticles (MoO/C) for reversible Li/Na storage were synthesized via a green and facile bio-inspired route. The uniformly distributed MoO nanoparticles, the porous agaric-like carbon matrix and high degree graphitization of carbon materials, effectively mitigated the huge volume changes during cycling and improved the reversible capacity, resulting in the outstanding electrochemical behaviors with excellent rate capability, high capacity and excellent stable long cycling lifespan as anodes for lithium and sodium storage. Especially, the MoO/C electrodes showed ultralong cycling performance under high current density of 5.0 A g, presenting a reversible capacity of 363.2 mAh g after a prolonged 2000-cycles as anodes for Li storage. Meanwhile, the MoO/C electrodes displayed a super-long cycling lifespan of 3000 cycles with the reversible discharge capacity of 193.5 mAh g at the current density of 5.0 A g for Na storage. Furthermore, the kinetic analysis of MoO/C-4 electrodes as anodes for Li/Na storage was carried out to further investigate the electrochemical behavior. The ultralong cycling performance under high-density could satisfy the demands of next-generation anode electrodes for Li/Na ion batteries, promoting the commercialization process of MoO-based materials.

Download full-text PDF

Source
http://dx.doi.org/10.1016/j.jcis.2021.03.149DOI Listing

Publication Analysis

Top Keywords

moo nanoparticles
12
ultralong cycling
12
cycling lifespan
12
agaric-like anodes
8
anodes porous
8
porous carbon
8
carbon decorated
8
decorated moo
8
li/na storage
8
reversible capacity
8

Similar Publications

An ultrasensitive ECL immunosensor with a dual signal amplification strategy using AuNPs@GO@SmMoSe and Gd(MoO) for estriol detection.

Anal Chim Acta

February 2025

School of Chemistry and Chemical Engineering, University of Jinan, Jinan, 250022, PR China; Department of Chemistry, Sungkyunkwan University, Suwon, 16419, Republic of Korea. Electronic address:

Background: Estriol (E3) is a common estrogen responsible for regulating the female reproductive system, but excessive amount can pose health risks to humans and wild life. Therefore, sensitive and accurate detection of estriol level is crucial. A novel competitive ECL immunosensor based on a dual signal amplification strategy of AuNPs@GO@SmMoSe and Gd(MoO) was fabricated for ultrasensitive detection of estriol.

View Article and Find Full Text PDF

Construction of a red phosphorus-molybdenum dioxide electron-rich interface for efficient photocatalytic reduction of carbon dioxide.

J Colloid Interface Sci

January 2025

School of Environmental Science and Engineering, Guangdong Provincial Key Laboratory of Environmental Pollution Control and Remediation Technology, Sun Yat-sen University, Guangzhou 510006, China. Electronic address:

Developing efficient catalysts to enhance photoreduction carbon dioxide (CO) into hydrocarbon fuels is a great challenge. As metallic material, molybdenum dioxide (MoO) has very high conductivity and charge density, which make it a promising candidate as photocatalyst. However, its photocatalytic activity is limited by the serious charge recombination.

View Article and Find Full Text PDF

Dipole Modulation Engineering Enhances Structural Order of PEDOT:PSS for Efficient and Stable InP-Based QLEDs.

ACS Appl Mater Interfaces

December 2024

School of Physical Science and Technology, State Key Laboratory of Featured Metal Materials and Life-cycle Safety for Composite Structures, Guangxi University, Guangxi Key Laboratory of Processing for Non-ferrous Metals and Featured Materials, Guangxi University, Nanning 530004, China.

Article Synopsis
  • Indium phosphide (InP)-based quantum dot light-emitting diodes (QLEDs) offer excellent color purity and brightness, making them ideal for future display technologies.
  • The performance limitations caused by the disordered structure of poly(3,4-ethylenedioxythiophene):polystyrenesulfonate (PEDOT:PSS) can be improved by embedding molybdenum oxide (MoO) nanoparticles, enhancing charge transport.
  • This modification increases the external quantum efficiency (EQE) significantly from 12.2% to 17.8% and improves device stability at high brightness levels, showcasing the benefits of dipole engineering for future lighting applications.
View Article and Find Full Text PDF

To date, preparing materials with highly dispersed metal nanoparticles without metal agglomeration on a solid support is challenging. This work presents an alternative approach for synthesizing NiCo species on hierarchical ZSM-5 materials derived from a ZSM-5@NiCoAl-LDHs composite. The designed material was prepared by the growth of a NiCo-layered double hydroxides (LDHs) precursor on the surface of hierarchical ZSM-5 nanosheets.

View Article and Find Full Text PDF

Obtaining a robust electrode composed of Sn-based metal oxides and carbonaceous matrix through nanoscale structure engineering is essential for effectively improving Li-ion batteries' electrochemical performance and stability. Herein, we report a bimetallic MoO-xSnO/Sn nanoparticles uniformly anchored on N, S co-doped graphene nanosheets (MoO-xSnO/Sn@NSG) as an anode electrode for Li-ion battery via a one-step hydrothermal and thermal treatment approach. In the MoO-xSnO/Sn nanocomposite, the generated Sn-O-Mo bond can modulate the electronic and composition structures to improve the intrinsic conductivity of SnO and reinforce the structural stability during cycles.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!