Application of nucleating agents is the most versatile and industrially applied way to manipulate the crystalline structure of isotactic polypropylene (iPP). Various materials possess a nucleating effect, but from the viewpoint of dispersibility, the partially soluble ones are the most advantageous. Our objective was to synthesize new ,'-dicyclohexyldicarboxamide homologues and study their applicability as nucleating agents in iPP. Carbon-13 nuclear magnetic resonance (C NMR) and infrared spectroscopy were used to prove that the synthesis reactions were successful. Thermal stability of the compounds was investigated with simultaneous thermal analysis. Nucleating efficiency and solubility were characterized by polarized light microscopy and differential scanning calorimetry. Polarized light microscopy was also applied to study the effect of novel additives on the morphology of iPP. The properties, important from the viewpoint of applicability, were also investigated. Tensile tests were performed to characterize the main mechanical properties, and standard haze measurements were performed to characterize optical properties. It can be concluded that the investigated compounds are partially soluble nucleating agents and influence the crystalline structure of iPP. Most of the studied compounds have a moderate nucleating efficiency, but a very interesting dendritic structure develops in their presence. Two of them proved to be non-selective β-nucleating agents, which result in a remarkable improvement of impact resistance and higher opacity.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC8028137 | PMC |
http://dx.doi.org/10.1021/acsomega.1c00064 | DOI Listing |
Vet Res Commun
January 2025
Faculty of Agriculture, University Farm, Utsunomiya University, Tochigi, 321-4415, Japan.
The purpose of this study was to improve the quality of frozen-thawed canine spermatozoa through the optimization of glycerol concentration (GC) and freezing rate in the semen freezing protocol. Ejaculates from nine dogs were diluted with an extender containing 0%, 1.5%, 3%, 6%, or 9% glycerol.
View Article and Find Full Text PDFAdv Mater
January 2025
State Key Laboratory of Structural Chemistry, CAS Key Laboratory of Design and Assembly of Functional Nanostructures and Fujian Key Laboratory of Nanomaterials, Fujian Institute of Research on the Structure of Matter, Chinese Academy of Sciences (CAS), Fuzhou, Fujian, 350002, China.
Controlling the microstructure of semiconducting polymers is critical for optimizing thermoelectric performance, yet remains challenging, requiring complex processing techniques like alignment. In this study, a straightforward strategy is introduced to enhance the thermoelectric properties of semi-crystalline polymer films by incorporating minimal amounts of nucleating agents, a method widely used in traditional polymer industries. By blending less than 1 wt% of N,N'-(1,4-phenyl)diisonicotinamide (PDA) into poly(2,5-bis(3-alkylthiophen-2-yl)thieno[3,2-b]thiophene) (PBTTT-C14), controlled modulation of crystallization behavior is achieved, resulting in reduced structural disorder and enhanced charge carrier mobility.
View Article and Find Full Text PDFInt J Biol Macromol
January 2025
College of Food Science and Technology, Zhejiang University of Technology, Hangzhou 310014, China; Zhejiang Key Laboratory of Green, Low-carbon and Efficient Development of Marine Fishery Resources, Hangzhou 310014, China; National R&D Branch Center for Pelagic Aquatic Products Processing (Hangzhou), Hangzhou 310014, China. Electronic address:
Slurry ice preparation experiences considerable supercooling, which can be mitigated by nano-nucleating agents. A nano-nucleating agent (CH/PE-TP NPs) was prepared by ultrasonication-assistant self-assembly of chitosan (CH) and pectin (PE), encapsulated with tea polyphenols (TP). Ultrasonication for 10 min downsized self-assembled aggregates from 5.
View Article and Find Full Text PDFInt J Biol Macromol
January 2025
State Key Laboratory of Chemical Engineering, Shanghai Key Laboratory of Multiphase Materials Chemical Engineering, School of Chemical Engineering, East China University of Science and Technology, Shanghai 200237, China. Electronic address:
Branched poly (butylene succinate-co-butylene terephthalate) (BPBST) was synthesized by in-situ polycondensation to enhance the foamability of poly (butylene succinate-co-butylene terephthalate) (PBST) and was blended with cellulose nanocrystals (CNC) to address foam shrinkage. The introduction of 2 wt% CNC increased the crystallization temperature of BPBST from 66.6 °C to 87.
View Article and Find Full Text PDFAdv Mater
January 2025
School of Chemistry and Chemical Engineering, Yangzhou University, Yangzhou, Jiangsu, 225009, P. R. China.
Biomimetic calcification is a micro-crystallization process that mimics the natural biomineralization process, where biomacromolecules regulate the formation of inorganic minerals. In this study, it is presented that a protein-assisted biomimetic calcification method for the in situ synthesis of nitrogen-doped metal-organic framework (MOF) materials. A series of unique core-shell structures are created by utilizing proteins as templates and guiding agents in the nucleation step, creating ideal conditions for shell growth.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!