Dielectrowetting Control of Capillary Force (Cheerios Effect) between Floating Objects and Wall for Dielectric Fluid.

Micromachines (Basel)

Department of Mechanical Engineering and Materials Science, University of Pittsburgh, Pittsburgh, PA 15237, USA.

Published: March 2021

A capillary interaction between floating objects and adjacent walls, which is known as "Cheerios effect", is a common phenomenon that generates capillary attraction or repulsion forces between them depending on their wettabilities, densities, geometries, and so on. This paper deals with controlling the capillary forces, specifically, acting on objects floating on a dielectric (non-conductive) fluid. A key control input parameter is the wettability (contact angle) of the sidewall adjacent to the floating object. By introducing dielectrowetting to the sidewall and actively changing the contact angle on the sidewall, the capillary force is controlled and easily reversed between attraction and repulsion. In this reversing process, the tilting angle of the sidewall is another critical parameter. A theoretical relation taking the titling angle into account is compared and in good agreement with experimental results obtained from the trajectory of the floating object. Finally, a continuous motion of the floating object is demonstrated using this control where an array of dielectrowetting electrode pads is sequentially activated.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC8004620PMC
http://dx.doi.org/10.3390/mi12030341DOI Listing

Publication Analysis

Top Keywords

angle sidewall
12
floating object
12
capillary force
8
floating objects
8
attraction repulsion
8
contact angle
8
floating
6
capillary
5
dielectrowetting control
4
control capillary
4

Similar Publications

Creep model of bond-degradation in deep granite based on variable radius particle clump.

Sci Rep

January 2025

Xincheng Gold Mine of Shandong Gold Mining Co., Ltd., Laizhou, 261400, Shandong, China.

The creep failure of rocks is related to its microstructure, external loading and time. A nonlinear yield model was introduced to describe the variation in the cohesion and friction angle with plastic strain and intergranular stress. The mechanical properties and creep characteristics of deep granite were obtained by indoor tests, and a variable radius particle clump model was constructed based on the particle flow method.

View Article and Find Full Text PDF

Flexible Mushroom-Like Cross-Scale Surface with Extreme Pressure Resistance for Telecommunication Lines Anti-Icing/Deicing.

ACS Appl Mater Interfaces

January 2025

School of Manufacture Science and Engineering, Key Laboratory of Testing Technology for Manufacturing Process, Ministry of Education, Southwest University of Science and Technology, Mianyang 621010, People's Republic of China.

Ice accretion caused by freezing rain or snowstorms is a common phenomenon in cold climates that seriously threatens the safety and reliability of telecommunication lines and other overhead networks. Various anti-icing strategies have been demonstrated through surface engineering to delay ice formation. However, existing anti-icing surfaces still encounter several challenges; for example, surfaces are prone to ice-pinning formation due to the impact of supercooled droplets, which leads to a loss of anti-icing effectiveness.

View Article and Find Full Text PDF

Here, we systematically investigate the effect of mesa/sub-mesa sidewall engineering on single-junction (SJ) and high-voltage (HV) deep ultraviolet light-emitting diodes (DUV LEDs). The configuration of ∼46° inclined angle of the mesa/sub-mesa sidewall and Al reflector optimally promotes light extraction of SJ/HV DUV LEDs. We further observe substantial improvements in the self-heating and external quantum efficiency (EQE) droop effects of HV DUV LEDs with an increasing number of sub-mesas.

View Article and Find Full Text PDF

Modern photonic devices demand low-cost, scalable methods for creating periodic patterns over diverse surfaces including nonplanar and tipped ones, the examples of which can be readily found in fiber optics. Laser-induced periodic surface structures (LIPSS) offer an attractive route for fabricating such patterns in a single-step straightforward procedure, where the temporal and spatial locality of the self-interference effects ensure robustness against variations of the laser processing parameters. In this work, we show the LIPSS-assisted oxidation of thin titanium films by near-IR femtosecond laser pulses as a promising technology for the production of regular gratings consisting of rutile ridges.

View Article and Find Full Text PDF

Hydrophobicity of periodic structure with taper angle under pressure impact.

Sci Rep

December 2024

Graduate School of Medicine, Science and Technology, Shinshu University, 3-15-1 Tokida, Ueda, Nagano, 386-8567, Japan.

Biomimetic periodic structures have garnered attention due to their excellent water repellency. The normal-taper angle, which is aspects of the cross-sectional structure, is important factor in achieving water repellency and pressure resistance; however, the underlying physical phenomenon has not been fully explained. Moreover, once a surface becomes hydrophobic, it is difficult to measure the apparent contact angle.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!