AI Article Synopsis
Article Abstract
Bio-based plastics were designed to replace single-use plastics and to cause less post-consumer environmental damage. This paper assesses the weathering of four bio-based polymers created by ring opening polymerization (ROP) promoted by a previously reported Ti-based catalyst, to detect any problems before production was scaled up. Samples were aged in seawater to identify degradation products and monitor structural changes. Surfaces evidenced degradation and a range of leaching products was observed. Aside from compounds used in the preparation of the plastics (i.e. residual monomers and benzyl alcohol), the degradation products included carboxylic acids (often found in plastic leachate), oxacyclohexadecan-2-one (potentially toxic to aquatic life) and triphenylmethane (potential carcinogen). Overall, there were fewer structural changes in the fossil fuel based polymer (PS) and in the commercially available bio-based plastic studied for comparison purposes than the lab based bio-based polymers.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/j.marpolbul.2021.112272 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Catalyst Improved Stereoselectivity and Regioselectivity Control to Access Completely Alternating Poly(lactic-co-glycolic acid) with Enhanced Properties.
Angew Chem Int Ed Engl
December 2024
Qingdao Institute of BioEnergy and Bioprocess Technology Chinese Academy of Sciences, Bio-based Materials, Songling Road 189., 266101, Qingdao, CHINA.
The poly(lactic-co-glycolic acid) (PLGA) with completely alternating sequence has attracted growing attention as an ideal candidate in controlled drug delivery. However, the approach to completely alternating PLGA remains a challenge. Herein, we report the successful synthesis of completely alternating PLGA via highly regioselective and stereoselective ring-opening polymerization.
View Article and Find Full Text PDFButyl Acrylate/2-Methylene-1,3-Dioxepane/Vinyl Acetate Emulsion Terpolymerization: Incorporating Backbone Degradable Linkages into Adhesive Applications.
ChemSusChem
December 2024
University of Ottawa, Department of Chemical and Biological Engineering, CANADA.
The ring-opening polymerization of bio-based monomer 2-methylene-1,3-dioxepane (MDO) can reportedly enhance polymer degradability. Butyl acrylate (BA)/MDO/vinyl acetate (VAc) terpolymers were synthesized via emulsion polymerization for their eventual application as pressure-sensitive adhesives (PSAs). While using MDO in emulsion polymerization leads to a more sustainable process, it also presents challenges such as MDO hydrolysis, MDO ring retention, and inadequate MDO distribution.
View Article and Find Full Text PDFRapid and well-controlled degradation of polylactic acid materials with bio-based GEL(pectin/α-cellulose/SiO/CaCl).
Int J Biol Macromol
December 2024
College of Chemical Engineering and Materials Science, Tianjin University of Science & Technology, Tianjin 300457, China. Electronic address:
Polylactic acid (PLA) has been a subject of considerable interest as a degradable polymer. However, the degradation process is slow and uncontrollable. In this work, controlled degradable PLA/bio-based GEL (pectin/α-cellulose/SiO/CaCl) hydrophilic plasticizer composite material was successfully prepared by solution blending process.
View Article and Find Full Text PDFTailoring the Mechanical Properties of Fungal Mycelium Mats with Material Extrusion Additive Manufacturing of PHBH and PLA Biopolymers.
ACS Omega
December 2024
Faculty V Mechanical Engineering and Transport Systems, Institute of Mechanics, Chair of Stability and Failure of Functionally Optimized Structures, Technische Universität Berlin, Berlin 10623, Germany.
To advance the concept of a circular economy, fungal mycelium-based materials are drawing increased attention as substitutes for nonsustainable materials, such as petroleum-based and animal-derived products, due to their biodegradability, low carbon footprint, and cruelty-free nature. Addressing the challenge of mechanical properties in fungal mycelium products, this study presents a straightforward approach for reinforcing fungal mycelium mats. This is achieved by using two bio-based and biodegradable polymers, poly(3-hydroxybutyrate--3-hydroxyhexanoate) (PHBH) and polylactic acid (PLA), via material extrusion additive manufacturing (MEX AM), commonly known as 3D printing, to produce fungal mycelium-biopolymer composites.
View Article and Find Full Text PDFAccessible preparation of a novel nitrogen‑phosphorus synergetic nanocellulose-based flame retardant with excellent char-forming ability for enhancing the anti-melting droplet property of PA66.
Int J Biol Macromol
December 2024
College of Textile Science and Engineering (International Institute of Silk Institute), Zhejiang Sci-Tech University, Hangzhou 310018, China. Electronic address:
Developing eco-friendly and effective flame retardants is crucial for enhancing the fire resistance of polymeric materials. This study developed a novel nitrogen‑phosphorus (NP) synergistic nanocellulose-based flame retardant (CNC-PEI-PA) by grafting polyethyleneimine (PEI) and phytic acid (PA) onto the CNC. CNC-PEI-PA demonstrated remarkable thermal stability, char-forming ability, and antibacterial activity.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!