Due to the increasing clinical application of alpha particles, accurate assessment of their dosimetry at the cellular scale should be strongly advocated. Although observations of the impact of cell and nuclear geometry have been previously reported, this effect has not been fully quantified. Additionally, alpha particle dosimetry presents several challenges and most conventional methodologies have poor resolution and are limited to average parameters across populations of cells. Meaningful dosimetry studies with alpha particles require detailed information on the geometry of the target at a subcellular scale.. The impact of cellular geometry was evaluated for 3 different scenarios, a spherical cell with a concentric nucleus, a spherical cell with an eccentric nucleus and a model of a cell attached to a flask, consisting of a hemispherical oblate ellipsoid, all exposed to 1,700At radionuclide decays. We also evaluated the cross-irradiation of alpha particles as function of distance to a source cell. Finally, a nanodosimetric analysis of absorbed dose to the nucleus of a cell exposed to 1 Gy of different alpha emitting radionuclides was performed.. Simulated data shows the dosimetry of self-absorbed-dose strongly depends on activity localization in the source cell, but that activity localization within the source cell did not significantly affect the cross absorbed dose even when cells are in direct contact with each other. Additionally, nanodosimetric analysis failed to show any significant differences in the energy deposition profile between different alpha particle emitters.. The collected data allows a better understanding of the dosimetry of alpha particles emitters at the sub-cellular scale. Dosimetric variations between different cellular configurations can generate complications and confounding factors for the translation of dosimetric outcomes into clinical settings, but effects of different radionuclides are generally similar.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1088/2057-1976/abf29f | DOI Listing |
Biopolymers
March 2025
Guangxi Key Laboratory of Natural Polymer Chemistry and Physics, College of Chemistry and Materials, Nanning Normal University, Nanning, People's Republic of China.
The crosslinked porous corn starch was prepared by two steps: the native corn starch was hydrolyzed by α-amylase and glucoamylase, then the porous corn was crosslinked by sodium trimetaphosphate (STMP). The morphology and size of granules, spherulites, crystal type, molecular structure, swelling properties, thermal stability and adsorption properties of the crosslinked porous starch were investigated. The results indicated that a lot of holes formed in the porous starch, and the particle size of starch granules decreased.
View Article and Find Full Text PDFJ Dent Sci
January 2025
Department of Conservative Dentistry, School of Dentistry and Dental Research Institute, Seoul National University, Seoul, Republic of Korea.
Background/purpose: This study assessed the ability of experimental materials consisting of dicalcium silicate (DCS) and tricalcium silicate (TCS) with nanosized particles to form intratubular crystals under phosphate-buffered saline (PBS) and the effect on dentin permeability reduction.
Materials And Methods: By isolating the cervical part of the extracted premolars, 195 specimens were obtained. Two experimental materials (DCS/TCS and TCS) were applied to the dentin surface by brushing and stored in PBS (n = 65).
Med Phys
January 2025
Department of Medical Physics, Memorial Sloan Kettering Cancer Center, New York, New York, USA.
Background: Diffusing alpha-emitters Radiation Therapy ("Alpha DaRT") is a promising new radiation therapy modality for treating bulky tumors. Ra-carrying sources are inserted intratumorally, producing a therapeutic alpha-dose region with a total size of a few millimeter via the diffusive motion of Ra's alpha-emitting daughters. Clinical studies of Alpha DaRT have reported 100% positive response (30%-100% shrinkage within several weeks), with post-insertion swelling in close to half of the cases.
View Article and Find Full Text PDFAnn Biomed Eng
January 2025
Department of Biomedical Engineering, Yildiz Technical University, Esenler, 34220, Istanbul, Türkiye.
Titanium (Ti)-based materials are favored for hard tissue applications, yet their bioinertness limits their success. This study hypothesizes that functionalizing Ti materials with chitosan nano/microspheres and calcitriol (VD) will enhance their bioactivity by improving cellular activities and mineralization. To test this, chitosan particles were applied uniformly onto Ti surfaces using electrophoretic deposition (EPD) at 20 V for 3 minutes.
View Article and Find Full Text PDFInt J Biol Macromol
January 2025
School of Textiles and Clothing, Yancheng Institute of Technology, Yancheng, Jiangsu 224051, China. Electronic address:
The electrical conductivity and antibacterial properties are crucial characteristics for bacterial cellulose (BC) based membranes to be broadly applied in the field of wearable electronics. In the study, to achieve these aims, alpha-lipoic acid (LA) was utilized as anchoring groups and reducing agent, hydroxypropyl-β-cyclodextrin (HP-β-CD) capped magnetic particles (FeO NPs) and the in-situ formed silver nanoparticles (AgNPs) were sequentially incorporated into the BC matrix to fabricate BC based nanocomposite membranes (HP-β-CD/FeO/LA@BC and HP-β-CD/FeO/LA/Ag@BC). Fourier transform attenuated total reflectance infrared spectroscopy (FTIR-ATR) and field emission scanning electron microscopy (FE-SEM) analysis proved the dense networks were formed in the modified BC membranes.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!