Nitrogen-doped carbon encapsulated zinc vanadate polyhedron engineered from a metal-organic framework as a stable anode for alkali ion batteries.

J Colloid Interface Sci

Engineering Research Center of Polymer Green Recycling of Ministry of Education, College of Environmental Science and Engineering, Fujian Normal University, Fuzhou, Fujian 350007, China; Fujian Key Laboratory of Pollution Control & Resource Reuse, Fuzhou, Fujian 350007, China. Electronic address:

Published: July 2021

In this work, we fabricated vanadium/zinc metal-organic frameworks (V/Zn-MOFs) derived from self-assembled metal organic frameworks, to further disperse ultrasmall ZnVO nanoparticles and encapsulate them in a nitrogen-doped nanocarbon network (ZVO/NC) under in situ pyrolysis. When employed as an anode for lithium-ion batteries, ZVO/NC delivers a high reversible capacity (807 mAh g at 0.5 A g) and excellent rate performance (372 mAh g at 8.0 A g). Meanwhile, when used in sodium-ion batteries, it exhibits long-term cycling stability (7000 cycles with 145 mAh g at 2.0 A g). Additionally, when employed in potassium-ion batteries, it also shows outstanding electrochemical performance with reversible capacities of 264 mAh g at 0.1 A g and 140 mAh g at 0.5 A g for 1000 cycles. The mechanism by which the pseudocapacitive behaviour of ZVO/NC enhances battery performance under a suitable electrolyte was probed, which offers useful enlightenment for the potential development of anodes of alkali-ion batteries. The performance of ZnVO as an anode for SIBs/PIBs was investigated for the first time. This work provides a new horizon in the design ZVO/NC as a promising anode material owing to the intrinsically synergic effects of mixed metal species and the multiple valence states of V.

Download full-text PDF

Source
http://dx.doi.org/10.1016/j.jcis.2021.02.108DOI Listing

Publication Analysis

Top Keywords

batteries
5
mah
5
nitrogen-doped carbon
4
carbon encapsulated
4
encapsulated zinc
4
zinc vanadate
4
vanadate polyhedron
4
polyhedron engineered
4
engineered metal-organic
4
metal-organic framework
4

Similar Publications

Objective: Deep brain stimulation (DBS) is an effective neurosurgical option for patients with treatment-resistant obsessive-compulsive disorder (OCD). Despite being more costly than neuroablative procedures of comparable efficacy, DBS has gained popularity over the years for its reversibility and adjustability. Although the cost-effectiveness of DBS has been investigated extensively in movement disorders, few economic analyses of DBS for psychiatric disorders exist.

View Article and Find Full Text PDF

Precise Synthesis of 4.75 V-Tolerant LiCoO with Homogeneous Delithiation and Reduced Internal Strain.

J Am Chem Soc

January 2025

College of Engineering and Applied Sciences, Jiangsu Key Laboratory of Artificial Functional Materials, National Laboratory of Solid State Microstructures, Collaborative Innovation Centre of Advanced Microstructures, Nanjing University, Nanjing 210093, P. R. China.

The rapid advancements in 3C electronic devices necessitate an increase in the charge cutoff voltage of LiCoO to unlock a higher energy density that surpasses the currently available levels. However, the structural devastation and electrochemical decay of LiCoO are significantly exacerbated, particularly at ≥4.5 V, due to the stress concentration caused by more severe lattice expansion and shrinkage, coupled with heterogeneous Li intercalation/deintercalation reactions.

View Article and Find Full Text PDF

High-Rate 4.2 V Solid-State Potassium Batteries by In Situ Polymerized Epoxide Ether Electrolyte.

Nano Lett

January 2025

College of Materials Science and Engineering, Hunan Joint International Laboratory of Advanced Materials and Technology of Clean Energy, Hunan Province Key Laboratory for Advanced Carbon Materials and Applied Technology, Hunan University, Changsha 410082, China.

Solid-state metallic potassium batteries (SSMPBs) afresh have attracted incremental attention because of their potential to supplement solid-state metallic lithium batteries. However, SSMPBs suffer poor electrochemical performances due to the low ionic conductivity of solid electrolytes and huge electrode/electrolyte interfacial resistance. Herein, high-rate SSMPBs are achieved by in situ ring-opening polymerization of 1,3-dioxolane with succinonitrile as a plasticizer and Al(OTf) as the catalyst, where the succinonitrile enables short-chain polyether electrolytes.

View Article and Find Full Text PDF

Charge transport in materials has an impact on a wide range of devices based on semiconductor, battery, or superconductor technology. Charge transport in sliding charge density waves (CDW) differs from all others in that the atomic lattice is directly involved in the transport process. To obtain an overall picture of the structural changes associated to the collective transport, the large coherent x-ray beam generated by an x-ray free-electron laser (XFEL) source was used.

View Article and Find Full Text PDF

Enhancing transport and chemomechanical properties in cathode composites is crucial for the performance of solid-state batteries. Our study introduces the filler-aligned structured thick (FAST) electrode, which notably improves mechanical strength and ionic/electronic conductivity in solid composite cathodes. The FAST electrode incorporates vertically aligned nanoconducting carbon nanotubes within an ion-conducting polymer electrolyte, creating a low-tortuosity electron/ion transport path while strengthening the electrode's structure.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!